What clutch for 200bhp

[dan106]

What clutch do you guys recommend for running 200bhp and maybe a bit more?

My standard clutch has done fine at 178bhp but will it cope with anymore?

I've also got a 1000 mile old exedy standard replacement clutch kit, what can that take?

Cheers guys

[Gainzy]

Those stage 3 pucks are meant to be good also TRD clutches from rhd

[daniel_g]

Exedy 3 puk all day long

[5e colin]

i uses this the mr2 4age 16v clutch 212mm 150e delivered and fees payed its held up of 1.2bar tdo4 no bother what so ever on my aasco fly

http://www.ebay.com/itm/XTD-CERAMIC-STAGE-3-RACING-CLUTCH-KIT-86-89-MR2-/191945329277?hash=item2cb0d54a7d

[hopalong_neil]

i uses this the mr2 4age 16v clutch 212mm 150e delivered and fees payed its held up of 1.2bar tdo4 no bother what so ever on my aasco fly

http://www.ebay.com/itm/XTD-CERAMIC-STAGE-3-RACING-CLUTCH-KIT-86-89-MR2-/191945329277?hash=item2cb0d54a7d

Is this a straight fit in a 4e?

[richardc9052]

Yeah they bolt straight on and are very good. One of the lads has one on his 4e with wepr ext ct9 kit, speedvision latest hybrid at 1.2 bar for the last 5/6k miles and its sweet. The pressure plate is standard but painted. Still a nice bite from the clutch without the leg work, however if you can get a stronger pressure plate even second hand I would recommend it.

[5e colin]

fuck me is my pressure plate just painted ?? i never spotted that when fitting

still holds up wel tho

[richardc9052]

Yeah, we had this one tested in Murfits in dublin and it came back the exact same as the standard one. Still holds well.

[dan106]

Don't you get stung with a big import tax on that?

Looks good for the money though

Sent from my iPhone using Tapatalk

[richardc9052]

its already calculated in if you look below shipping

[5e colin]

ya as i said in my comment delivered and fees payed

[FMuscle]

I also have XTD in mine, but stage 2, listed for Paseo (5E). I read bad comments, mostly in Nissan forums, but it hasn't failed me in almost two years now.

[gorganl2000]

for 200bhp...quality organic performance/sports clutch (cusco, trd, act, etc) AND uprated pressure plate (cusco, trd, act, etc)....this set up will take more than 200hp and similar torque...it feel like stock and works great --- anyone who doesn't go to the gym will still be able to drive your car

[5e colin]

I also have XTD in mine, but stage 2, listed for Paseo (5E). I read bad comments, mostly in Nissan forums, but it hasn't failed me in almost two years now.

neither have i very good value for money my clutch feels a good bit heavier then the stock cluch before

[dan106]

Them xtd clutches still holding up fella's?

[5e colin]

yes on tdo4l13 1.1 no problem no slip now back on tfo35hm 0.8 no slip

when i changed to the ct12b hybrid it slipped as the turbo torque was much bigger then the little tdo4

[dan106]

It'll do on a hybrid ct9 then aha

Sent from my iPhone using Tapatalk

[5e colin]

sure it will do ct9 hybrids are tiny midget turbos

[dan106]

You running it on an lsd Colin?

Sent from my iPhone using Tapatalk

[5e colin]

did for a while lsd box got fucked on a NA box now that sucks now wheelspin everywhere

[Gainzy]

Exedy 3 puk all day long

This or a TRD. My mate will have a very good TRD clutch for sale soon!

[dan106]

You got an up to date link for the xtd Colin? And do you use a normal release bearing or one that comes with the kit?

[Arnold]

I've had an Exedy organic on mine with 220hp for about 6 years now, no problems at all. Far more bearable to live with than a full on paddle clutch too.