richglanzav Posted May 20, 2011 Share Posted May 20, 2011 just to let u kno dude, the pdf's some of the measurements are a bit out Quote Link to post Share on other sites
Bluebear Posted May 20, 2011 Share Posted May 20, 2011 Would these fit under 14" wheels at all? I'm guessing there's absolutely no chance Quote Link to post Share on other sites
richglanzav Posted May 21, 2011 Share Posted May 21, 2011 Would these fit under 14" wheels at all? I'm guessing there's absolutely no chance i tried the pdf file on mine mate and for size around the disc edge theres loads of room to spare and mine r 15's so they may do...its the size (thickness) of the caliper that im unsure of. its either very close or fouling. is there any mod's that can be made if it is touching? Quote Link to post Share on other sites
danb87 Posted May 21, 2011 Share Posted May 21, 2011 i have 15"rotas gt3s belivelooking for a set of these possibly.could you please pm me with prices an all details etcthanks very much Quote Link to post Share on other sites
Shorty Phil Posted May 24, 2011 Share Posted May 24, 2011 Keri you have PM Quote Link to post Share on other sites
mech5107 Posted May 30, 2011 Share Posted May 30, 2011 Does anyone has the pdf for 14". The link seems to be dead... Quote Link to post Share on other sites
JackStar Posted May 31, 2011 Share Posted May 31, 2011 I need that PDF aswell.Jack Quote Link to post Share on other sites
Shorty Phil Posted June 2, 2011 Share Posted June 2, 2011 Hey Keri still awaiting your reply on my pm i really want to get these ordered asap Quote Link to post Share on other sites
Guest Enzo Posted June 2, 2011 Share Posted June 2, 2011 ul have to excuse kerri for the next week, hes had a really shitty thing hes had to go through right now Quote Link to post Share on other sites
Liam_D Posted June 2, 2011 Share Posted June 2, 2011 What is the final deliverd price for a set of these please Keri? Whenever your ready dude! Quote Link to post Share on other sites
Shorty Phil Posted June 5, 2011 Share Posted June 5, 2011 Ok Enzo Hope your ok Keri mate i await your pm when you are back working.. Quote Link to post Share on other sites
Keri-WMS Posted June 18, 2011 Author Share Posted June 18, 2011 ul have to excuse kerri for the next week, hes had a really shitty thing hes had to go through right nowThanks for the support Geo, that's an understatement... Also cheers for the your patience lads, much appreciated!!!!! Right then, here we go:I need that PDF aswell.JackDoes anyone has the pdf for 14". The link seems to be dead...Fixed it, here you go guys: (Beta/proposed kit) smallest possible 262.5mm kit profile, accurate to about 1.0mm: 262.5mm WMS kit PDF just to let u kno dude, the pdf's some of the measurements are a bit outHi Rich, are they? Shouldn't be - which bits? i tried the pdf file on mine mate and for size around the disc edge theres loads of room to spare and mine r 15's so they may do...its the size (thickness) of the caliper that im unsure of. its either very close or fouling. is there any mod's that can be made if it is touching?That's the offset you mean? The 275x22 kit is of course 3mm thinner than the 277x25 which helps! Failing that it's wheel spacers to the rescue, we've got very nice 2mm ones cut from 6082 T6 plate if needed. Does that make sense?Would these fit under 14" wheels at all? I'm guessing there's absolutely no chance It's possible, but only a few motorsport wheels stand a chance. Have you tried the PDFs inside your wheels? The proposed 262.5mm kit might be the solution failing that....?i have 15"rotas gt3s belivelooking for a set of these possibly.could you please pm me with prices an all details etcthanks very muchPM on the way!What is the final deliverd price for a set of these please Keri? Whenever your ready dude!Another PM on the way!Ok Enzo Hope your ok Keri mate i await your pm when you are back working.. Yet another PM on its way! Quote Link to post Share on other sites
mech5107 Posted June 19, 2011 Share Posted June 19, 2011 Thanks Keri! Hope it will fit my 14"s Quote Link to post Share on other sites
Keri-WMS Posted June 19, 2011 Author Share Posted June 19, 2011 No problem! Let us know how you get on... Quote Link to post Share on other sites
richglanzav Posted June 19, 2011 Share Posted June 19, 2011 hey keri, i need some pads, whats the best pads for fast road use? are any of them more responsive than others? need a price for some new ones. cheers. Quote Link to post Share on other sites
mech5107 Posted June 19, 2011 Share Posted June 19, 2011 Keri do you offer only the caliper with pads and lines? I mean no adapters, no disks...I tried the 14" template today and it wouldn't clear my 14" Black Racing wheels.For the reference, it's 14*6 ET40. If it was ET34 and a tad smaller rotor, it will fit (Lets say the stock glanza 255mm) Quote Link to post Share on other sites
Keri-WMS Posted June 20, 2011 Author Share Posted June 20, 2011 hey keri, i need some pads, whats the best pads for fast road use? are any of them more responsive than others? need a price for some new ones. cheers.PM sent.Keri do you offer only the caliper with pads and lines? I mean no adapters, no disks...I tried the 14" template today and it wouldn't clear my 14" Black Racing wheels.For the reference, it's 14*6 ET40. If it was ET34 and a tad smaller rotor, it will fit (Lets say the stock glanza 255mm)We can supply just the calipers etc - the trouble is that the calipers run into the hub's lugs at any disc size under 260mm-ish. In fact the 262.5mm kit pushes it's luck and might need the hub's lugs to be smoothed if it's lumpier than the one I've got here!Would wheel spacers help with your particular alloys? Quote Link to post Share on other sites
mech5107 Posted June 20, 2011 Share Posted June 20, 2011 I'd say with some 15mm spacer, it would fit, but i already have 6mm and i hit the fenders... Quote Link to post Share on other sites
Keri-WMS Posted June 20, 2011 Author Share Posted June 20, 2011 That's not ideal! 15" wheels make life so much easier.. ;) Quote Link to post Share on other sites
Simon Posted June 20, 2011 Share Posted June 20, 2011 Keri did you get my p.m. Quote Link to post Share on other sites
Keri-WMS Posted June 20, 2011 Author Share Posted June 20, 2011 Keri did you get my p.m.Oops (yep), I'll get back to you now! Quote Link to post Share on other sites
RobinL Posted June 22, 2011 Share Posted June 22, 2011 Got 2 question before I order the big kit.1. I got a hub with my engineswap. Where do I measure for the 54 or 55mm?2. Will my HKS braided GTT brakelines fit the calipers? If no, What do I need to get this fitted ?Sorry for my engrish, lol Quote Link to post Share on other sites
Keri-WMS Posted June 22, 2011 Author Share Posted June 22, 2011 Got 2 question before I order the big kit.1. I got a hub with my engineswap. Where do I measure for the 54 or 55mm?2. Will my HKS braided GTT brakelines fit the calipers? If no, What do I need to get this fitted ?Sorry for my engrish, lolHere you go:1. It's the part that the hole in the middle of the disc goes over. Some hubs are 54mm all the way, later cars have a 55mm step at the bottom.2. I'm afraid they won't, you'll need the WMS-spec Earls ones.Hope that helps! Quote Link to post Share on other sites
Keri-WMS Posted July 25, 2011 Author Share Posted July 25, 2011 I'm pretty much at the point of ordering some alloy bells + rotors, so I'm wondering what kind of numbers of people are interested in them, either to go with their existing WMS kits as a retro-fit upgrade, or as part of a kit?As a retro-upgrade they will cost approx:- £119.00+vat/pr for the rotors (273x20.5 and work with the existing T20 caliper and the brackets sold so far)- £112.00+vat/pr for the bells (6082 T6 alloy, clear anodised like the WMS brackets)- £TBC nuts and bolts (nuts will not have Nylon, they'll by all-metal Binx aerospace style locknuts)- £TBC T20 "20.5mm" spec caliper spacers+bolts to rebuilt the calipers to the correct widthAs a kit (same "bits" as the current kits: calipers, rotors+bells, brackets+inserts, bolts, washers) it'll be maybe £615-ish+vat, about £180+vat more than the 275x22 one-peice disc version (£170+vat more than the 277x25 one). Quote Link to post Share on other sites
Keri-WMS Posted July 26, 2011 Author Share Posted July 26, 2011 I just got a final price on the machining and the bells will actually be £167.36+vat/pr, the increase is because I made them deeper - didn't think it would make that much difference! It'll add £50ish+vat to the kit cost as well. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.