Glanza Mac Posted December 7, 2011 Author Share Posted December 7, 2011 not that engine but hoping to buy a forged lump then build this engine back up as a little something on the side to do , need sell the n/a first tho so i need to see what christmas will bring and see how much money i can rack up etc Quote Link to post Share on other sites
Glanza Mac Posted January 19, 2012 Author Share Posted January 19, 2012 Not much progress because of the weather and other issues ive had to deal with i.e my other car first got the front bumper off to make more room to remove the engine underneath from the car instead of out the topAnd a few little goodies santa brought meDomo Hat (love it)Hks Oil filterBlitz resevoir socksOrange Toyota battery barCarbon fibre battery cover (second item to the carbon build)Domo t shirt and the carbon eye brows + the restengine and gearbox is now out! Next is to buy a forged lump and to clean the engine bay plus possibly spray the gearbox up etc to make it look nice.Old engine stripped and this is what i found!On the engine standSump off and thats what i saw (peice of metal on the baffle plus everywere else also)Again (crap picture)Gungeon pin and other damage to the bore etcCracks in the boreHmm conrod should be longer than that "/Bits of piston and conrod in the sumpWhats left of my pistonAgainAnd againExedy Stage 2 Paddle ClutchAgainTbh was rather shocked on the damaged caused but happy i have found out i have a top quality clutch not all bad i guess Quote Link to post Share on other sites
Liam_D Posted January 19, 2012 Share Posted January 19, 2012 Engine looks fucked matey Quote Link to post Share on other sites
Glanza Mac Posted January 19, 2012 Author Share Posted January 19, 2012 sure is , never mind ay Quote Link to post Share on other sites
lew777 Posted January 19, 2012 Share Posted January 19, 2012 looks pretty bad that dude Quote Link to post Share on other sites
Glanza Mac Posted January 20, 2012 Author Share Posted January 20, 2012 yeahh, not salvageable so im glad i didnt waste my time in buying forged pistons etc, just looking for the full lump now Quote Link to post Share on other sites
Glanza Mac Posted January 30, 2012 Author Share Posted January 30, 2012 Atlast! Bought myself a Fully Forged 4EFTE, Built by Tuning DevelopmentsWiseco Pistons 74.5mmScat RodsZep Racing 1.2mm HeadgasketARP HeadboltsCruise Uprated Valve SpringsGenuine Toyota Oil Pump KitOEM Water Pump KitOEM Cambelt Kit inc Idler & TensionerACL Main Bearing KitACL Big End Bearing KitACL Thrust Washer KitFully Machined and Polished Bottom EndFully Stripped, Cleaned and Rebuilt Cylinder HeadTurbo kit is a Td04 Turbo, Wepr Manifold running external wastegate (Tial), Downpipe + Screamer.Also while i was buying those i bought some D2 coilovers and Walbro 255 Fuel Pump Management is next before i run the engine on anything more than 0.6 psi boost as i also need bigger injectors also.Very happy, just need to get it all fitted Pictures will be added shortly Quote Link to post Share on other sites
templar2007 Posted January 30, 2012 Share Posted January 30, 2012 Glad you got an engine mate goin to be a quick car Quote Link to post Share on other sites
Glanza Mac Posted January 30, 2012 Author Share Posted January 30, 2012 Thanks it was AdamStarlet87's engine and he ran 273bhp through it Quote Link to post Share on other sites
lew777 Posted January 30, 2012 Share Posted January 30, 2012 nice mate get some pics up Quote Link to post Share on other sites
Ryan5793 Posted January 30, 2012 Share Posted January 30, 2012 good news on the new engine, should be a right little rocket Quote Link to post Share on other sites
Glanza Mac Posted January 31, 2012 Author Share Posted January 31, 2012 thanks , yeahh shall do tomorrow guys Quote Link to post Share on other sites
Glanza Mac Posted January 31, 2012 Author Share Posted January 31, 2012 Update of pictures Engine bayDirtyGiving it a cleanForged EngineTd04 Wepr Turbo KitScreamerTial External WastegateWalbro 255 Fuel PumpD2 Coiloverswill be cleaning these up^GearboxRondomsWill update with a few more pictures tomorrow. Quote Link to post Share on other sites
lew777 Posted January 31, 2012 Share Posted January 31, 2012 when will she be up a running mate? Quote Link to post Share on other sites
Glanza Mac Posted January 31, 2012 Author Share Posted January 31, 2012 Hoping in the next 3 weeks, work, lack of light and not got an engine crane atm is stopping me Quote Link to post Share on other sites
templar2007 Posted January 31, 2012 Share Posted January 31, 2012 Lookin good mate Quote Link to post Share on other sites
Glanza Mac Posted January 31, 2012 Author Share Posted January 31, 2012 thanks dude Quote Link to post Share on other sites
Glanza Mac Posted February 2, 2012 Author Share Posted February 2, 2012 Started to sort some more things out and the weather didnt stop me Not nice to seeDirty BlockDirty TD04VHT Sprayed Block...no masking as manifold going black and rocker cover getting powdercoatedVHT Sprayed TurboFitted my other painted manifold...alot betterCloser viewBraided HoseWirebrushed the D2's a bitTo Do List:Grease+Fit D2'sBuy TD04 intercooler pipesBuy engine oilSwap a few things over from old engine to new (mounts, alternator, pas pump etc)Spray Manifold BlackPowdercoat rocker coverStrip brakes down to clean them upRemove bucket seats to fit harness'sRent engine crane + fit engineShould keep me busy. Quote Link to post Share on other sites
Glanza Mac Posted February 6, 2012 Author Share Posted February 6, 2012 Pictures from the weekend when i got my arse in gear and started to fit things Car halfway out my drive, jacked up and on the highest setting on the axle stands to just get the wheels of the floorOld strut removedSome sort of electronic strut (stiffness setting i think)D2's FittedHorrible brakesWheels back on and there is loads of room compared to beforeArch gap! looks lower than before when the engine was in it Removed old fuel pumpStripped it downFitted New PumpNot bad for a few hours work Quote Link to post Share on other sites
lew777 Posted February 6, 2012 Share Posted February 6, 2012 i like reading your bulid thread dude but your pictures are way to fucking big. take forever to load Quote Link to post Share on other sites
akyakapotter Posted February 6, 2012 Share Posted February 6, 2012 Looking good fella keep up the good work in need to pull my finger out and fit a few bits Quote Link to post Share on other sites
Glanza Mac Posted February 7, 2012 Author Share Posted February 7, 2012 sorry ill edit the size just for you lew , well its taken me ages to pull my own finger out.. just happens i do it when its bloody freezing! Quote Link to post Share on other sites
Glanza Mac Posted February 9, 2012 Author Share Posted February 9, 2012 Just thought i would post a few items that ive recieved in the post recently LSD oilKODE tilt plateUS number plate 8x12 instead of the Jap 9x13TRS harness cutter (better to be safe than sorry)All togetherJust waiting for my Millers 5W50 oil to arrive, buy some coolant and power steering fluid then im set up to drop the engine in ! Quote Link to post Share on other sites
Glanza Mac Posted February 11, 2012 Author Share Posted February 11, 2012 Oil has arrived Millers 5w50 Full Synthetic, not everyones choice im sure but has been ran since the engine has been built.Sard FPR ordered and should be with me shortly plus i got my engine crane today from a friend so this week i shall be placing the engine in the bay, Fingers Crossed Quote Link to post Share on other sites
Jamie1st Posted February 11, 2012 Share Posted February 11, 2012 Looking good dude, bet you can't wait to get her running again! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.