FreedomCore Posted February 10, 2013 Author Share Posted February 10, 2013 Nah that's a OEM front brace. Mine has a toyosports sticker on it but it's the same as the rest. Quote Link to post Share on other sites
FreedomCore Posted February 13, 2013 Author Share Posted February 13, 2013 So I've had another change of heart. I'm thinking I don't want to go for a Rep Glanza any more. Going to try and keep it SR + Optional Extras So my newest list consists of: Fix passenger side wing mirrorSort any dentsNew DecalsRefurb wheels"Adjust" rear strut.Front mud flapsNew full exhaustHandling mods - Any suggestions?Any SR body mods, Front splitter for example. Also any suggestions? But now i have a predicament. I recently purchased a Glanza inlet +TB which is partially prepared to be put in a N/A. But should i go ahead with the install or stick with the original? Quote Link to post Share on other sites
FreedomCore Posted February 13, 2013 Author Share Posted February 13, 2013 Oh I also took reinstalled the original air filter. Sounds so quite now. Quote Link to post Share on other sites
rmsnoel Posted February 13, 2013 Share Posted February 13, 2013 Stick the manifold on man. Keep your standard throttlebody for torque.I like the sound of SR+ I wonder what the + wpuld be like on the SR decals Quote Link to post Share on other sites
rmsnoel Posted February 13, 2013 Share Posted February 13, 2013 Check my thread for the supra boot puller mod Quote Link to post Share on other sites
FreedomCore Posted February 13, 2013 Author Share Posted February 13, 2013 I saw that, did you get it fitted? And how difficult was it? Quote Link to post Share on other sites
FreedomCore Posted February 17, 2013 Author Share Posted February 17, 2013 OK so I cant be bothered to sort out the rear strut so I'm just going to sell it and and get a 2 point strut instead. Quote Link to post Share on other sites
FreedomCore Posted February 20, 2013 Author Share Posted February 20, 2013 (edited) Cleaned and fitted a K&N panel filter today. Also found some old pics of me working on car in the sun. Oh sun, where are you? Edited March 14, 2013 by FreedomCore Quote Link to post Share on other sites
FreedomCore Posted February 21, 2013 Author Share Posted February 21, 2013 (edited) Glanza inlet installed. Still need to fine tune the throttle cable though. Edited March 14, 2013 by FreedomCore Quote Link to post Share on other sites
Asad Posted February 21, 2013 Share Posted February 21, 2013 take the two bolts off the bracket and move it towards the left, fasten with one bolt.....should make it easier Quote Link to post Share on other sites
FreedomCore Posted February 21, 2013 Author Share Posted February 21, 2013 This was my solution. Dont know if you can make it out. It just needs a little more tuning. Ill bare what you said in mind. Thanks. Any idea on how to sort the short intake hose thingy-ma-bobby? Quote Link to post Share on other sites
FreedomCore Posted February 21, 2013 Author Share Posted February 21, 2013 take the two bolts off the bracket and move it towards the left, fasten with one bolt.....should make it easier Sorted it now. Cheers Quote Link to post Share on other sites
FreedomCore Posted February 21, 2013 Author Share Posted February 21, 2013 UKSO decals ordered =] Quote Link to post Share on other sites
FreedomCore Posted February 24, 2013 Author Share Posted February 24, 2013 (edited) Gave the rocker a splash of paint today. And a big thanks to Dean for the nice new stainless nuts. Edited March 14, 2013 by FreedomCore Quote Link to post Share on other sites
FreedomCore Posted March 4, 2013 Author Share Posted March 4, 2013 (edited) Ultra Racing Strut arrived today, quickly painted it and put it on. Don't look bad. I feel it needs something like a sticker on there though to pretty it up a bit. And i tried for minimal trimming on the plastics. Went well. Edited March 14, 2013 by FreedomCore Quote Link to post Share on other sites
FreedomCore Posted March 8, 2013 Author Share Posted March 8, 2013 (edited) Got some nice new unchipped uncracked unfaded wheel caps today. I also received a package from ID-Workz today. Cant wait to get it painted and put it on Edited March 14, 2013 by FreedomCore Quote Link to post Share on other sites
Jamie93DLZ Posted March 8, 2013 Share Posted March 8, 2013 You have made this we car in to a minter mate, fair play.... Were you get the caps from mate? They look great, need a set for mine as my wheels are getting powder coated in 2weeks Quote Link to post Share on other sites
FreedomCore Posted March 8, 2013 Author Share Posted March 8, 2013 You have made this we car in to a minter mate, fair play.... Were you get the caps from mate? They look great, need a set for mine as my wheels are getting powder coated in 2weeks Thanks man, I didn't want to drift too far for its SR roots lol Some one has started to sell the stickers on eBay. You'll need new caps though as the stickers are slightly larger then the original ones. Funny enough I was at Atomic Wheel today getting a quote of powder coating my wheels. I'm thinking Satin Gunmetal. Got quote about £60 a wheel for refurb + paint. What colour you going for? Quote Link to post Share on other sites
Jamie93DLZ Posted March 8, 2013 Share Posted March 8, 2013 Can you send me the link mate? Did you trim them down? Got a quote myself, 55 quid a wheel, thats shot blasted and powder coated, almost the same price as yours... Im going for the oem look mate as there isnt many sr's left so wheels will be silver Can you send me the link mate? Did you trim them down? Got a quote myself, 55 quid a wheel, thats shot blasted and powder coated, almost the same price as yours... Im going for the oem look mate as there isnt many sr's left so wheels will be silver Quote Link to post Share on other sites
Jamie93DLZ Posted March 8, 2013 Share Posted March 8, 2013 Sorry on my phone here lol Quote Link to post Share on other sites
FreedomCore Posted March 8, 2013 Author Share Posted March 8, 2013 I dont know if this link will work http://www.ebay.co.uk/itm/151001853369?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 This is the stickers. This is the caps. http://www.ebay.co.uk/itm/140768515357?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 And no trimming needed. Unless you use the original caps. Quote Link to post Share on other sites
Jamie93DLZ Posted March 8, 2013 Share Posted March 8, 2013 yea the link worked, he must be out off them as there isnt any for sale Will order them new caps as trimming them might just ruin them haha, Did them caps go straight into your centres ok then? You getting new sr decals for your car? Quote Link to post Share on other sites
FreedomCore Posted March 8, 2013 Author Share Posted March 8, 2013 Yeah, not at flush as the originals but good enough. Hell yeah. Probably going to original colours though. Yourself? Quote Link to post Share on other sites
Jamie93DLZ Posted March 8, 2013 Share Posted March 8, 2013 Yep got mine today of morgey and they look amazing, Just went for the red and green Quote Link to post Share on other sites
Beastmode panda Posted March 8, 2013 Share Posted March 8, 2013 Nice one man i like it! So clean. What did you get from iddy? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.