bigash86 Posted November 20, 2012 Share Posted November 20, 2012 hi guysi posted this a few weeks ago and brought a dump valve of a member on here unfortunately it has been lost in the post since he sent it so am back looking for a dumpvalve for my glanza i need the bov and also the hoses ect it must fit a hdi intercooler so the pipe bit that comes off the intercooler piping and also have the hose to the inlet if anyone has something let me know cheers Link to post Share on other sites
TrisK Posted November 20, 2012 Share Posted November 20, 2012 you do know you could just bung it off mate?as long as its a tight seal so it doesnt leak. Link to post Share on other sites
steve-gers Posted November 20, 2012 Share Posted November 20, 2012 I have a blue baileys dv26 with hoses and clips Link to post Share on other sites
bigash86 Posted November 20, 2012 Author Share Posted November 20, 2012 you do know you could just bung it off mate?as long as its a tight seal so it doesnt leak.yes mate but i want that bov sound lolI have a blue baileys dv26 with hoses and clipshow much for it mate? will it fit the hdi intercooler pipping? is it in good working condition? Link to post Share on other sites
steve-gers Posted November 20, 2012 Share Posted November 20, 2012 (edited) not sure on the pipe size 100% but yeah should fit fine. I will check the pipe later on and post size in here and yes it works perfectly. Edited November 20, 2012 by steve-gers Link to post Share on other sites
bigash86 Posted November 20, 2012 Author Share Posted November 20, 2012 ok mate let me know cheers Link to post Share on other sites
Amjad Posted November 20, 2012 Share Posted November 20, 2012 At high boost the HDI does have a high pitched whoosh Link to post Share on other sites
bigash86 Posted November 20, 2012 Author Share Posted November 20, 2012 it does mate but am not getting any boost as the pipe on the intercooler is letting all the pressure out if i block it and dont put a bov on will it still make that sound? am missing not having my boost lights come on on my dash lol Link to post Share on other sites
StuDoc 72 Posted November 20, 2012 Share Posted November 20, 2012 (edited) I will make a slightly similar noise on full boost. Not as loud. And it will flutter slightly at low boost. Make sure you blocked off the vac pipe to the mani? Edited November 20, 2012 by StuDoc 72 Link to post Share on other sites
bigash86 Posted November 20, 2012 Author Share Posted November 20, 2012 i had the front mount fitted by the people who fitted my body kit am not sure if its blocked off or what pipe i am looking at my mechanical skills are not the best how would i know which pipe it is? Link to post Share on other sites
StuDoc 72 Posted November 20, 2012 Share Posted November 20, 2012 (edited) The pipe you are blocking off would be where your dump valve would go. The other would be a small vac pipe on the inlet mani that would go to the top of your dump valve to operate it. Ill try and find you a pic. Do you have a boost gauge fitted? Edited November 20, 2012 by StuDoc 72 Link to post Share on other sites
StuDoc 72 Posted November 20, 2012 Share Posted November 20, 2012 Do you see the thin blue pipe running over the top of the engine? If you follow that You will see it goes on to a metal nipple on the inlet mani.If you have no Dump Valve or Boost gauge then that must be blocked off.You can run your boost gauge straight off that or as I've done you can have a t-piece on the pipe and run boost gauge and dump valve from it. Link to post Share on other sites
bigash86 Posted November 20, 2012 Author Share Posted November 20, 2012 cheers matey i will have a check Link to post Share on other sites
1990timeismoney Posted November 20, 2012 Share Posted November 20, 2012 hi i have a sard bov for sale Link to post Share on other sites
iamlegend Posted November 20, 2012 Share Posted November 20, 2012 have a baileys bov here £10works fine Link to post Share on other sites
Amjad Posted November 20, 2012 Share Posted November 20, 2012 I blocked mine off with duct tape and it worked, that is until high track temps melted the glue haha Link to post Share on other sites
TrisK Posted November 20, 2012 Share Posted November 20, 2012 I blocked mine off with duct tape and it worked, that is until high track temps melted the glue haha At high boost the HDI does have a high pitched whooshI think that source of your high pitched woosh would have been from a boost leak.Duck tape probably isnt up to the job haha Link to post Share on other sites
StuDoc 72 Posted November 20, 2012 Share Posted November 20, 2012 (edited) Lol no I wouldnt think so. A wine cork with some duct tape could prove a good solution if you can find one well sized. You just need to make sure that whatever you use cant get sucked in. Edited November 20, 2012 by StuDoc 72 Link to post Share on other sites
H_D Posted November 20, 2012 Share Posted November 20, 2012 (edited) I have a nomad racing (BOV) £60.Nomad racing are an old skool cosworth tuning company and this dumpavalve is rare as f*ck it consists of billet construction and the piston is also made out of billet alloy unlike alot of cheapy ones which have a plastic piston and are prone to leaking,No leaks and works perfect,PM if your interested and il put up a for sale thread so u can buy with confidence!For the HDI intercooler you need a 32mm to 25mm reducer they cost about £5-£6 from anyone who supplies silcone hoses Edited November 20, 2012 by H_D Link to post Share on other sites
Amjad Posted November 20, 2012 Share Posted November 20, 2012 I think that source of your high pitched woosh would have been from a boost leak.Duck tape probably isnt up to the job hahaHaha nah I've had leaks before and they whistle ;)It sounded the same when I used a bung, it was just track temps that made the bay too hot for my temp bodge lol Link to post Share on other sites
bigash86 Posted November 20, 2012 Author Share Posted November 20, 2012 hi i have a sard bov for salehow much mate does it have the hoses?have a baileys bov here£10works finedo you have the hoses? Link to post Share on other sites
iamlegend Posted November 20, 2012 Share Posted November 20, 2012 (edited) no can get the well cheap of ebay just measure it out simples Edited November 20, 2012 by iamlegend Link to post Share on other sites
1990timeismoney Posted November 20, 2012 Share Posted November 20, 2012 hi yeah its got the pipe to connect to intercooler. Link to post Share on other sites
Liam_D Posted November 20, 2012 Share Posted November 20, 2012 Might be selling a HKS SSQV in the next few weeks. Link to post Share on other sites
Recommended Posts