Jump to content

Jay's Forged Build *small update*


Recommended Posts

So this is a bit of an essay to start off so bare with me, a few of you may know me from the forums some of you not, so a few years ago i imported myself a 98 spec glanza and unfortunatly after a year a managed too roll it with left me gutted and in debt, bad times, i then had a silvery blue glanza rep followed by a silver glanza s. Missed my glanza so i brought a 97 spec shell to rebuild


DSC_0010_zps37a4b4c9.jpg



DSC_0012_zpsa31b5579.jpg



DSC_0013_zps46c7a822.jpg




So this morning i set about rooting through my attic too find some bits that i have lying around, then i progressed with starting the car, firstly the carpet was full of holes, so out it came and added to my list of parts i need, secondly someone had drilled 9 holes in the floor in different parts of the car so out with the silicone sealer, 98 spec lights fitted and i clean up inside. Thats all i have managed to get done now so next week i will be getting her up on stands and undersealing her



DSC_0014_zps774ba610.jpg



DSC_0016_zpsd3b6be89.jpg



DSC_0017_zpsbbf1b42b.jpg




So steering wheel is awful and will be changing to a 98 spec one once i source one, also i ordered some rear seats and brackets as i wasnt sure if it came with them and now i have two sets :D, i really hate the wheels, does anyone know what make they are??? Really wish my fiesta alloys were smaller as they would be perfect and are brand new



DSC_0018_zps4840c345.jpg









Current Spec



Exterior:



97 spec shell


kouki rear lights


rear oem splitter


Oem wind deflectors


Front one-off 98 bumper with smoothed in splitter


Rear blue tow hook


Lowering springs


15" Rays Te37's


Mitsuba alpha horns




Interior:



Full 98 spec interior


Airbag dash


Greddy turbo timer


Greddy profec 2 boost controller


Oem rear strutbrace


Oem mat set


Toyota etc


Rescueman 3


Multi-box


Key Barrel and footwell lights


Trd Gearknob


Apexi el backlight boost gauge



Engine


Stage 2 forged


Bored and notched


Weisco dished pistons


Scat rods


arp head bolts


arp shells


alc thrust washers


Ported and polished head


Spec 6 puk clutch


Civic rad


Kakimoto stainless exhaust


Top mount td04 turbo kit with turbosmart ewg


Large front mount


Solid shifter bushes


walbro fuel pump




Lots of parts still to source including



Coilovers (tein)


Oil cooler


Race spec rocker cover


Rrfpr


Greddy ecu and remap


Bride seats and takata harnesses


Rollcage


Carbon duck spoiler


Livesports spoiler


Livesports sideskirts


Carbon bonnet


Edited by fremyjay
Link to post
Share on other sites
  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

So today my 98 spec doorcards turned up from browner and also my carpet i ordered off ebay turned up too, once the weather died down i got the carpet fitted and cleaned, seat bolted down and interior plastics back in, took the doorcards off and the plastic to stop moisture getting in had been removed, so i set about making some new ones up. Managed to skint myself out with buying the car and the bits so apart from giving the interior a good clear and fitting the roof liner that will be all this month, its coming on now as i only need a few more bits for the interior and its done, then to start undersealing and sourcing an engine =]



DSC_0012_zpsd64a081a.jpg



DSC_0013_zpsbf478449.jpg



DSC_0015_zps71af82b1.jpg



DSC_0014_zps939bcc34.jpg


Edited by fremyjay
Link to post
Share on other sites
  • 4 weeks later...

So a small update as ive been busy with work lately, blacked out rear windows and generally cleaned the interior, had my set of wind deflectors from idrees turn up and some clips from jonnyep91. Also awiting a 98 spec dash from azza and some boot plastics from ebay. Hopefully i will get these fitted next week sometime, will get some photos once ive started some more work, still trying to source some parts so check out my wanted thread and if you can help would be grateful.


Link to post
Share on other sites

What else do you need? DASH loom? I have it here

Loom and some related gubbins from behind the control panel I would suspect, is it controlled via a motor or something?

I asked about it on toyotagtturbo around a year ago, do a search theres a little info in there if your interested in doing it.

Link to post
Share on other sites

Loom and some related gubbins from behind the control panel I would suspect, is it controlled via a motor or something?

I asked about it on toyotagtturbo around a year ago, do a search theres a little info in there if your interested in doing it.

I'm not. But my breaker had climate control. So seems sensible to try and save it all
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...