JDMginge Posted December 7, 2014 Author Share Posted December 7, 2014 Not much going on, front brakes are on I ended up using jhandys gt turbo brakes as they were in good working order rather then my glanza brakes that needed the slider rubbers and things also have braided hoses and stripped my rear axle off to change for my glanza axle and white line Panard rod. Before I fit it I will be under sealing and poly bushing so it won't be on till the new year but here the pics I have Cheers Quote Link to post Share on other sites
JDMginge Posted March 20, 2015 Author Share Posted March 20, 2015 (edited) Not posted in a while not a lot has happened really accept my small purchase that got delivered this week Full poly bush kit and anti lift kit so I got started soon as Edited March 20, 2015 by JDMginge Quote Link to post Share on other sites
jordan walker Posted June 17, 2015 Share Posted June 17, 2015 Have you had it on a dyno or had it mapped yet proper curious to know what these little things make with ITB's on them!Also what are they off? Quote Link to post Share on other sites
Rich-k Posted June 17, 2015 Share Posted June 17, 2015 Any updates? Quote Link to post Share on other sites
JDMginge Posted June 19, 2015 Author Share Posted June 19, 2015 I have taken them off for now because the fuelling was so far out it was misfiring until like 4k so until I get a wideband and a proper vacuum manifold box I'll leave them off Only done little bits on it lately Front and rear cusco carbon braces Rear discs and pads and braided hoses Fitted rear axle Fitted jam panard rod Fitted gt fuel pump because mine died one morningWill get some pics up later when I'm with the car Cheers Quote Link to post Share on other sites
JDMginge Posted June 20, 2015 Author Share Posted June 20, 2015 I bought a trd knob from Jdm-ep because I had some spare change on my PayPal Oh and have some gt injectors I don't care if they don't make a difference they were free And a close pic of rear brakes and shiny jam panard rod And here's my new braces fitted excuse the mess!Thanks for looking Quote Link to post Share on other sites
JDMginge Posted July 9, 2015 Author Share Posted July 9, 2015 So I purchased a standard Glanza rear bumper and side skirts also a standard sr front bumper just waiting for that to arrive now then I need to start saving to get a full respray Rear bumper is on just need to make holes for the sideskirts clips Can't wait for it to look like a clean fresh starlet again Quote Link to post Share on other sites
JDMginge Posted July 14, 2015 Author Share Posted July 14, 2015 Finally got a front bumper it's not a remix bumper but for now this will do lol just a bonnet left to do and I'll have to start saving for a respray Cheers for looking Quote Link to post Share on other sites
Rich-k Posted July 14, 2015 Share Posted July 14, 2015 Looks great man! Love the look of n.a with glanza skirts n rear bumpera but standard bumpers Quote Link to post Share on other sites
JDMginge Posted July 14, 2015 Author Share Posted July 14, 2015 Looks great man! Love the look of n.a with glanza skirts n rear bumpera but standard bumpers Cheers man yea I like it a lot I'm just upset no one wants to sell me there remix bumper haha one day I will have one ! Quote Link to post Share on other sites
Pinkygti Posted July 15, 2015 Share Posted July 15, 2015 They are quite rare now the remix bumpers, good progress though, given me some motivation to do mine 😎 Quote Link to post Share on other sites
Walker96 Posted January 6, 2016 Share Posted January 6, 2016 Any updates any this matey? Quote Link to post Share on other sites
JDMginge Posted February 9, 2016 Author Share Posted February 9, 2016 Small update Fitted a vaccuum box so I now have a vac running of each runner going to it then one for my map sensor, fuel pressure regulator and brake servo and it holds good pressure runs a lot better with it and get a good brake pedal from it.Also finally got a wideband so now I can actually see a better picture of how bad my fueling is haha So hopefully soon after a bit of playing around I'll be able to get it running mint already it runs so much better with a little bit of playing and sounds awesome under load. Oh and I treated my self to some work wheels just need to swap my tyres over from the speedlines Thanks for looking Quote Link to post Share on other sites
PPSR05 Posted February 10, 2016 Share Posted February 10, 2016 It's getting there looking good mate Quote Link to post Share on other sites
Westley Posted February 10, 2016 Share Posted February 10, 2016 This is going to be a mental little starlet! Quote Link to post Share on other sites
JDMginge Posted February 10, 2016 Author Share Posted February 10, 2016 It's getting there looking good mate This is going to be a mental little starlet! Cheers guys Quote Link to post Share on other sites
NewbieLewby Posted February 11, 2016 Share Posted February 11, 2016 very cool little car Quote Link to post Share on other sites
Rich-k Posted February 12, 2016 Share Posted February 12, 2016 I love it man Quote Link to post Share on other sites
Chris Green Posted February 14, 2016 Share Posted February 14, 2016 How's the car running now with the ITB's? Quote Link to post Share on other sites
JDMginge Posted February 15, 2016 Author Share Posted February 15, 2016 How's the car running now with the ITB's?A lot better now I've got a vac line coming of each runner and played with the apexi a little.At first it was misfiring a lot but now it does when it's cold but as soon as it warms up it's fine Quote Link to post Share on other sites
Chris Green Posted February 17, 2016 Share Posted February 17, 2016 How's the cold idle? Are you having to warm up for a few minutes before driving or have you set the idle higher?I'm going to be running a link ECU shortly, looking to fuel very rich while cold then cut back the mixture once warm, so I'll let you know how I get on with that. Quote Link to post Share on other sites
JDMginge Posted February 17, 2016 Author Share Posted February 17, 2016 How's the cold idle? Are you having to warm up for a few minutes before driving or have you set the idle higher?I'm going to be running a link ECU shortly, looking to fuel very rich while cold then cut back the mixture once warm, so I'll let you know how I get on with that.When it's cold it will idle at about 1100-1200 and missfires a little when it's cold andI've got less then a quarter of a tank of fuel but after that it's alright. I've had a play with the apexi playing with the low throttle fueling driving around the yard and it's a lot better to drive and reads better on the wideband. My mates selling his e manage blue which I was debating on but in two minds Quote Link to post Share on other sites
Pikey009 Posted February 22, 2016 Share Posted February 22, 2016 Awesome car mate. Put it back to an SR and go full sleeper Quote Link to post Share on other sites
JDMginge Posted February 23, 2016 Author Share Posted February 23, 2016 (edited) Awesome car mate. Put it back to an SR and go full sleeper What do you mean bud ? I've only got a Glanza rear bumper, rear lights and interior left on it now oh and wings but only difference is no side repeaters Edited February 23, 2016 by JDMginge Quote Link to post Share on other sites
Pikey009 Posted February 23, 2016 Share Posted February 23, 2016 Glanza rear bumper lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.