Sefton-EP91 Posted August 25, 2014 Posted August 25, 2014 (edited) I am looking at changing my exhaust before I get my car back from forging but what exhaust will be best suited for my setup.Fully forged 4eBillet wheel td04 hybrid (WEPR)+ supporting mods Once finished I am hoping for around 300hp but want to get a decent exhaust system. What diameter? What brand does everyone recommend?I don't want to spend through the roof so bare that in mind when replying. Thanks in advance. Edited August 25, 2014 by Sefton-EP91 Quote
abbie Posted August 25, 2014 Posted August 25, 2014 brand does not matter at all custom jobby 3" and what back box you like or you could leave no back box on it to keep noise levels down your choice Quote
Sefton-EP91 Posted August 25, 2014 Author Posted August 25, 2014 Sounds perfect. My main concern was the exhaust diameter. I was thinking custom aswell but expensive ... :/ Quote
Phil Posted August 25, 2014 Posted August 25, 2014 any aftermarket will do. right down to a HKS silent hi power. Phil Quote
abbie Posted August 25, 2014 Posted August 25, 2014 not expensive in Ireland anyway mate . brand ones are way over priced for what they are Quote
Sefton-EP91 Posted August 25, 2014 Author Posted August 25, 2014 not expensive in Ireland anyway mate . brand ones are way over priced for what they areCustom may be what will happen! LolBuddyclub straight through boooshI do like the BC Spec 2 but Loud is an understatement! Lol after a week I will have a deserted neighbourhood lmao Quote
daniel_g Posted August 25, 2014 Posted August 25, 2014 A 2.5" should flow 300bhp. 440 is what i got quoted for a custom 2.5" EP85 exhaust from decat to the back bumper, including a custom backbox built to a spec chosen by me. Thats by the best company in the area. Wouldnt say it was too bad a price. Quote
parksgt Posted August 25, 2014 Posted August 25, 2014 I have 3inch wepr side exit for sale as an option Made 301 hp mate Quote
Sefton-EP91 Posted August 25, 2014 Author Posted August 25, 2014 A 2.5" should flow 300bhp. 440 is what i got quoted for a custom 2.5" EP85 exhaust from decat to the back bumper, including a custom backbox built to a spec chosen by me. Thats by the best company in the area. Wouldnt say it was too bad a price.That's a very good price, I'm looking into dean at rw developments now just seen some of his work on FB and it's very goodI have 3inch wepr side exit for sale as an option Made 301 hp mateThanks mate but ideally looking for complete system, thanks for the offer though Quote
Phil Posted August 25, 2014 Posted August 25, 2014 3inch total will flow 300hp. so any 2.25/2.5inch with a 1inch external gate will do the trick. Phil Quote
Sefton-EP91 Posted August 25, 2014 Author Posted August 25, 2014 Thanks philm I will enquire about some custom job then. I think that will be suited Quote
Phil Posted August 26, 2014 Posted August 26, 2014 3inch total will flow 300hp. so any 2.25/2.5inch with a 1inch external gate will do the trick. PhilThis isn't to say that your turbo won't find it easier with a 4 inch drag exhaust straight out the bonnet Phil Quote
Chief Quimby Posted August 26, 2014 Posted August 26, 2014 (edited) I am running 3" from turbo, and then 2,5" over rear axle. Currently at 396hp at 1,85 barInternal wastegate Edited August 26, 2014 by Chief Quimby Quote
richardc9052 Posted August 26, 2014 Posted August 26, 2014 People underestimate exhaust flow I have a buddy with a 450bhp skyline with a 3" exhaust.. You can't go too big when turbo but it does effect you off boost. Best is to find a happy medium. For me 2" is perfect as I'll be running very little boost. For lads at 200-250 2.25"-2.5" is perfect.. Quote
Chief Quimby Posted August 26, 2014 Posted August 26, 2014 I i was to do again. I would go small as possible. To much noice with that 3" Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.