_JT_ Posted September 10, 2015 Author Posted September 10, 2015 Dean @ RW sorted me out with a catch can, very impressed with his work. JDM Saturday shot Quote
_JT_ Posted September 10, 2015 Author Posted September 10, 2015 So after the clutch had been run in it was very keen to see what power it was running before I tucked it away for winter.Done a compression test the week before and had 150 ish across all 4 so was happy to see what it pulled.Took the V to JF automotive in Maidstone which was local for work, booked in Saturday morning and away it went. 1st time I've had a car on the rollers i was nervous but all went well.182 bhp at the flywheel @ 1 bar. I was happy enough with this. Later that day I found a JAM FCD wired into the ecu which explained why I never experienced fuel cutt. Quote
_JT_ Posted September 13, 2015 Author Posted September 13, 2015 March 2015 I had the car booked in at TD for: TD04 Kit, Emanage Blue, TD Fuel rail with braided lines, FPR & fuel filter change, Ultra racing C-Pillar and Ultra Racing H-Bar. Got the car dropped off on a trailer with Mike and waited for the call to see what it made.Couple of weeks later I had the call one evening from Mike to say it was all done and had made 235bhp at just over 1 bar. I was very happy with the results and made plans to go and pick it upStarlet world ! Quote
_JT_ Posted September 13, 2015 Author Posted September 13, 2015 I was very impressed with Mike @ TD and would recommend them to anyone. Gave my car lots of love when they had it even gave he block & head a fresh coat of paint and a few other nice little touches that I wasn't expecting. 10/10.....the drive back was fun !! Quote
_JT_ Posted September 13, 2015 Author Posted September 13, 2015 Had a play around with TD04 Kit trying it without the screamer on....but once you've experienced a screamer they become addictive !!Also got the wheels acid dipped and resprayed gloss black, got rid of the horrible yellow calipers ! Fitted new EBC grooved discs and yellow stuff pads on the front and new OEM discs with EBC pads on the back Quote
_JT_ Posted September 13, 2015 Author Posted September 13, 2015 Seats were the next thing on the list. Stock Glanza seats are shockingly bad as we all know. I was looking at Bride seats for some time but just couldn't get my head around the price. Decided to go for some reclining Sparco's which I'm really happy with.At least my old seat didn't go to waste....Someone found it comfy lol !! Quote
_JT_ Posted September 13, 2015 Author Posted September 13, 2015 Santa Pod Japshow was next... RWYB Quote
_JT_ Posted September 14, 2015 Author Posted September 14, 2015 (edited) Seeeeee Ya !!!Done 3 runs, 1st one was the best of the bunch 14.2 didnt fully commit on any if them as I was too scared to blow it. Was great fun at the Japshow meet some cool people and learnt loads for next time. Having LSD massively helps with the launch but found it tricky to get the right amount of revs...too much and it's just massive wheel spin not enough and you get bogged down a bit. Against the R33 I nailed it at about 4k and it surprised me how quick it picked up and went.@turbotarquin on insta for vids if you want Edited September 14, 2015 by _JT_ Quote
_JT_ Posted September 17, 2015 Author Posted September 17, 2015 Cooling down after my 3 runs and lots of queuing up !Spotted a couple of other starlets at the japshow santa podThis EP82 was doing some decent times all weekend, had a good chat with the bloke who owned it. Toyota Tech I think ? Quote
_JT_ Posted September 20, 2015 Author Posted September 20, 2015 Couple of weeks ago my pcv snapped clean off my rocker, it was only ever a short term set up having it drilled out. Sent it off to Dean @RW who got it done properly for me with braided lines and of course a fresh coat of Milano RedAll done and this is how it currently sits in the garage. Next purchase will be a new set of wheels... Enkei's, but can't decide which ones yet Quote
jiggaman_16 Posted September 21, 2015 Posted September 21, 2015 Next purchase will be a new set of wheels... Enkei's, but can't decide which ones yet RPF1s.....u kno wat it is..... Quote
_JT_ Posted September 21, 2015 Author Posted September 21, 2015 RPF1s.....u kno wat it is..... Yeah there nice but i fancy something bit different like SR6's in bronze Quote
_JT_ Posted January 28, 2016 Author Posted January 28, 2016 Collecting some new bits to go on over winter Quote
diller Posted January 30, 2016 Posted January 30, 2016 Holy mother of God those wheels are sweet man, the build is so cool too. Top job Quote
_JT_ Posted January 30, 2016 Author Posted January 30, 2016 Holy mother of God those wheels are sweet man, the build is so cool too. Top job Thanks mate Quote
steve1093 Posted January 30, 2016 Posted January 30, 2016 Looking good mate! Great choice with the wheels too Quote
jiggaman_16 Posted January 30, 2016 Posted January 30, 2016 (edited) Dont ever stop with this car. Keep it up @ RPF1s, i absolutely hate to say i told u so Edited January 30, 2016 by jiggaman_16 Quote
_JT_ Posted January 31, 2016 Author Posted January 31, 2016 Dont ever stop with this car. Keep it up @ RPF1s, i absolutely hate to say i told u so Quote
_JT_ Posted January 31, 2016 Author Posted January 31, 2016 Looking good mate! Great choice with the wheels too Quote
_JT_ Posted February 1, 2016 Author Posted February 1, 2016 Such a clean build looks great 👍👍 cheers mate Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.