EP70-PT Posted March 2, 2016 Author Share Posted March 2, 2016 (edited) Yeah, ironed before the glue and after too Best mod for 4 imo... Edited March 2, 2016 by EP70-PT Quote Link to post Share on other sites
MrSweden Posted March 2, 2016 Share Posted March 2, 2016 Nice work! And good inspiration Quote Link to post Share on other sites
EP70-PT Posted March 2, 2016 Author Share Posted March 2, 2016 Wanted to do something star wars related but star wars fabric is stupidly expensive and this is more "neutral" Quote Link to post Share on other sites
MrSweden Posted March 2, 2016 Share Posted March 2, 2016 Haha. What are you thinking with your charis? Are they grey now?I want to do some interior work too, but i have no ide how Im gonna make the same color to the charis. Quote Link to post Share on other sites
EP70-PT Posted March 3, 2016 Author Share Posted March 3, 2016 I'm thinking of getting the center pattern of the seats covered in denim too, I'll have someone sew it for me, I'll just strip the seats and send the covers Quote Link to post Share on other sites
EP70-PT Posted March 3, 2016 Author Share Posted March 3, 2016 Can't wait to get my interior together, done the steering wheel center in denim too! what do you guys think? Quote Link to post Share on other sites
MrSweden Posted March 3, 2016 Share Posted March 3, 2016 Haha, looks great What about your dashboard? Is that grey as well?Dont know what the hell I am gonna do about that. Found a cool red to my cars interior, but that color do not look god with all the fucking grey in the rest of the car :/ Yours look nice and clean, and match the rest of the car Good work! Quote Link to post Share on other sites
EP70-PT Posted March 3, 2016 Author Share Posted March 3, 2016 Pick a neutral clean colour, you'll get bored of the flashy stuff, like red... Blue goes well with the grey, just planning on cleaning the dash, clean it well and test colours first Quote Link to post Share on other sites
EP70-PT Posted March 10, 2016 Author Share Posted March 10, 2016 I'm planning on doing something like this with a DIY AFR display that I'm making to replace my broken air vent (I broke the mounts inside so no vent is going in there now). Did something in paint to explain my idea: already have the plate measured and cut My question is, to wire the AFR (I know it's a narrowband, not a big deal) can I pick the signal from the O2 sensor by splicing on the #10 wire to the ECU (OX pin) ? seems crazy at the moment, but when I have an idea, I do it ahah will show you when it's finished I want a clean no gauges everywhere look so this is an option, and also, because racecar! ahahah Quote Link to post Share on other sites
EP70-PT Posted March 13, 2016 Author Share Posted March 13, 2016 Ordering these Quote Link to post Share on other sites
EP70-PT Posted March 17, 2016 Author Share Posted March 17, 2016 Soooo a lot is happening!This is arriving tommorow:http://m.imgur.com/S2IVKZEAaaaaaand... The best part.. To be continued ahah you have the hint ;) Quote Link to post Share on other sites
EP70-PT Posted March 18, 2016 Author Share Posted March 18, 2016 Yeah... This happened... can't wait! Quote Link to post Share on other sites
EP70-PT Posted March 19, 2016 Author Share Posted March 19, 2016 Headlights are on Quote Link to post Share on other sites
EP70-PT Posted March 19, 2016 Author Share Posted March 19, 2016 And the funny part is, I found a brand new spare key hidden behind the bumper... Yes... I bet it was still from the first owner x) Quote Link to post Share on other sites
5e colin Posted March 19, 2016 Share Posted March 19, 2016 (edited) I'm planning on doing something like this with a DIY AFR display that I'm making to replace my broken air vent (I broke the mounts inside so no vent is going in there now). Did something in paint to explain my idea: already have the plate measured and cut My question is, to wire the AFR (I know it's a narrowband, not a big deal) can I pick the signal from the O2 sensor by splicing on the #10 wire to the ECU (OX pin) ? seems crazy at the moment, but when I have an idea, I do it ahah will show you when it's finished I want a clean no gauges everywhere look so this is an option, and also, because racecar! ahahah yes can be done but a lot of work for show gauge why not fit same way but go real wideband ??? maybie easyer if you went digital buy this cheap gauge and use its parts ?? http://www.ebay.com/itm/EPMAN-Racing-52mm-Smoked-LED-Digital-Analog-Air-Fuel-Ratio-AFR-Gauge-20-10-AFR-/121883765893?hash=item1c60d6ac85:g:SPkAAOSwvUlWsYOC&vxp=mtr Edited March 19, 2016 by 5e colin Quote Link to post Share on other sites
EP70-PT Posted March 19, 2016 Author Share Posted March 19, 2016 Yeah will do that, gonna install oïl temp and voltage only for now Quote Link to post Share on other sites
EP70-PT Posted March 20, 2016 Author Share Posted March 20, 2016 (edited) So, my plans for the car atm:-Get all the glanza bits-Make sure it's roadworthy-Pass the "contrôle technique" aka MOT-Drive 1300km to my country (Portugal) in august-Get it painted professionally there (6P2) for a quarter of the price in France-Drive back to France with a mint Glanza S rep (N/A but not for long) will need to know if I can turbo it legally here x)Once I finish School next year and start earning more money, the fun begins Edited March 20, 2016 by EP70-PT Quote Link to post Share on other sites
EP70-PT Posted March 27, 2016 Author Share Posted March 27, 2016 (edited) Rocking the flag now! Edited March 27, 2016 by EP70-PT Quote Link to post Share on other sites
EP70-PT Posted April 5, 2016 Author Share Posted April 5, 2016 (edited) So, after a looooooooooooooooooooooooog battle against GLS with the great help of Jap91, I finally, yes FINALLY! Got my rear bumper and spoiler... Jap91 sent the package to me on the 2nd of February just so you get an idea... Will tell the rest of the story on the feedback I'll write on him.Thanks mate, a great seller on the forum, they should all be like him ;) anyway, test fitted!!! getting there! Still waiting on the front bits and looking for some skirts (already have the brake light, just didn't bother to fit it, have to drill the holes for the spoiler and then the hardest part is done And the reg surround will be color matched better to the rest of the car when I go to Portugal to get it painted, I'm going to drive it 1500km arlequin style... stealthy! Edited April 5, 2016 by EP70-PT Quote Link to post Share on other sites
Rich-k Posted April 6, 2016 Share Posted April 6, 2016 Looks great dude gunna look awesome! Quote Link to post Share on other sites
EP70-PT Posted April 6, 2016 Author Share Posted April 6, 2016 Looks great dude gunna look awesome!Thanks mate, hope so! Quote Link to post Share on other sites
Anglas Posted April 7, 2016 Share Posted April 7, 2016 Nice project. Do we see 4e-fte inside? Quote Link to post Share on other sites
EP70-PT Posted April 7, 2016 Author Share Posted April 7, 2016 Only next year when I start working handling first though.. Don't wanna go skidding around in every corner Quote Link to post Share on other sites
EP70-PT Posted April 11, 2016 Author Share Posted April 11, 2016 (edited) Drilled my bootlid for the spoiler, Nice and snug And my new plates should arrive tommorow Still waiting for shipping on my front end parts x)OH! And still looking for complete skirts.... Edited April 11, 2016 by EP70-PT Quote Link to post Share on other sites
SOG33K Posted April 12, 2016 Share Posted April 12, 2016 Looks good man, will come up a treat once it's all painted Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.