Dean_mc88

Or thread the standard rod making it adjustable simple solution

Just get a boost controller with different settings and put that in its place with hi low settings

surely more hassle than its worth , get an hks one with a boost controller

sure it would be the same as all the rest can only run it at 1 bar max I think and don't think you can run an rrfpr though as the plug and play ecu's like stock fuel pressure . can use an rrfpr but set it at stock fuel pressure

surely if its collapsing in on itself it has no leaks, does the car cut out when this happens? if not maybe blockage somewhere, if it does cut out then no boost leaks.

deffo would love a hoodie

The drivers side shaft is smaller on the oem lsd box than it is on the non lsd

I work all sorts of places around the world, im away for a min of a month come back have about 5 days off then back in the shop and possibly out again in another 2 weeks. ive spent 70% of my time out of the uk this year and my missus hates it, complains when I extend my stay. luckily I have my own house so when im home she stays nearly every night and sees her friends and I see mine on some weekends, I spend about an hr or two after work if im in the shop on the starlet then see her. I barely get any free time to myself unless shes in work and im off and even then im at the garage on the starl

Try working away months at a time , owning a starlet and juggling what ever free time you have between starlet, friends and girlfriend.

sandwich plate from id workz is 59 plus shipping I think, but no one seems to be getting back to me on a rear gearbox mount and to be honest I think making one might be best, yea man ill let you know how it goes if I do make one. As for the drivers shaft I already had mine in a deal so don't know how much

ive just got the same OEM gearbox I have shafts and box need to get a sandwich plate from id-workz or the like then find a rear gearbox mount if I cant find one have to try make one

need the sandwich plate as well

someone must have one

I have loads of bits all in my loft want to sell them but never have time

looking smart mate ill be doing that all once mines running properly and cage etc is all in

Think you will have to stick some in mine when I pop up mate

sound mate PMd

bump

PM sent

id come and collect these off you for 50 pound when im back

I had a similar issue and it was a knock sensor and knock sensor wire however not fully fixed it as I ran out of time, after changing my knock sensor it got better but still did it around 5k then I re wired the knock sensor worked for 10 mins then started again because I didn't earth the shielding. I have a full engine loom to replace my cut up loom see if this sorts it properly

haha im not even in the country at the minute but ill keep my eye on it mate

I want it just don't know if I have the cash haha

bump