200sx-Starlet-Jay

lol sound mate, let me know if you want a bung marra Jay

my uncle can do it, depends what sort of deal he can do lol. i need motors installing for the central lockin, and then the alarm purchasing and fitting. all in atm, alarm is about £90 for a decent one thats like toad/cobra/scorpian etc thats thacham cat 1. then i need the motors, which will probs be about £20 ish quid? you reckon he can do it for that or was ures like loads more?

Hi all on my GT loom for my NA conversion, there is 1 insulated white wire that goes down to a single pin plug. on my lamda sensor ( i received off a glanza with my blitz decat) it has 4 wires and a 4 pin plug. however one of the wires is the same shade of white. ive checked under the bonet of a glanza, it has the same 1 pin plug, white insulated wire. but has 1 wire on the other end to the sensor as well??!! real puzzled me, im unsure if this is the correct lambda, or if i only used the white wire it would work the same? i can only assume the others are for an AFR or something like this?

Hi all been out in garage today again. nailed a few more items off the list as usual Sorted the wipers out. they work fully now. Sorted the washer jets, they now just need final wiring. Sorted the rear fog light out for MOT time, i can just add the light at bottom, and away you go. and final wired the whole light assembly. ive also written a final to do list. and altho it is large in size, 3 more sessions of wiring should see it almost done. 1 or 2 things for wiring and sensors then. Also decided to do away with the start button and fuel pump switch for security, and im going to buy a ca

omfg.... i didnt realise it looked like this... possibly my favourite ep91... EVER. that looks like its got a real road presence you just dont wanna fuck with lol. you sort head gasket i take it?!

sounds good mate. what style rim? nothing cheap and chav i hope

cheers guys!! lol @ russleh - well you can have one for £3 delivered in black.. or £5 in white. i wont bulshit you, i will just litteraly give it a good few coats.. not the amazing finish of a car panel like, but looks sweet enough on mine just so you know as well, the bung is 30mm, the hole is 29mm. all i did was run a round metal file around the inside hole. sliped it straight in lolz .let me know mate

good project base mate! get some new rims on it, and lower it.. will sort it out loads marra! Jay

looks suprisingly well in the boot what YALL think?

lol i know.. but if i aint careful im guna let this run away with me lol.. plan is to make it like this, then leave it and have my fun with it. then save to get another project car and keep this as a daily, or go balls out and make this into a 5efe forged up, and slam a big turbo on it and run serious boost lol got my bung sprayed up, guna go fit it now, see what she is like pics soon

yeah ive got a toyo sports one and while it would be fine as is, if im going ext gate, then i will jus get one thats ready made. Sound good on ures?!

ok no worries dude if you havnt already read elsewhere... im seriously contemplating the setup im running... dont now whether or not to go Externaly wastegated, or to keep it how it is. i love the sound of the EWG, sounds awsome! wat you guys think?

it fits with only a slight round off of a metal file, in the bootlid. pops straight in gave the plastic a coat in 040 white, looks good. will let it dry over night and get it fitted tomorrow. pics to follow

bang on! rite ok, so exactly what am i gunna need then.. ive got at the moment, aftermarket SS mani, Hybrid ct9, HKS actuator, Blitz decat pipe, and soon will have a Blitz dual SBC boost controller. would be on a greddy emanage blue. if i was to sell my stainless mani, HKS actuator, and blitz ebc. and replace for a WEPR mani, and a manual boost controller would this be all i need ( other than the EGW its self ) and weld the penny flap shut? sorry if i make no sense, ive got a bit lost with it all. you do need some kind of boost control i take it with the EGW? want to run 1.1-1.2 bar? Jay

sound.. and just to check, its for a ct9? Jay

oh rite, but you said screamer?! that looks like its for an EWG? am i mistaken? would only need manifold i think.. does he sell them seperate? Cheers guys Jay

under controlled conditions, on private airfield, i had my NA off the clock. still had a tad more as well, only slightly though. was increasing microscopicly slow lol. i reckon 140-145 is quite accurate, considering i managed that on 1.3 NA power. if i took mine out to do that again, with over double the power i reckon i would reach that fairly spot on. i think anyone who doubts this figure, either had a stock glanza/gt, or isnt used to driving fast. ( as it should be )

yeah thort as much lol... may leave it for a while, get it running first ay!

oh i get you now! just received loads of bungs through the post, guna check they fit tonight hopefully. they are for the rear wiper hole, so for anybody who is wanting to de wiper the back end, i have a few left over, and we can sort somthing out. they are hard plastic, and can be sprayed to the cars colour.

just been on the look for an external wastegate, and seen loads ( as you do) on ebay. all retailing at about £100 are they absolute shite? or do they actualy work as they are supposed to? would be after it operating at 1.1-1.2 bar

its not realy the best manifoild anyway... how do you go about modifiying the original one? which bit does it go on?

that sensor is a vaccum sensor, i brought 2 diff ones,they come together and are on the GT. duno exactly what they do though. and as for other one, any chance of a pic, dont get whaere you mean Jay

thort it was that easy lol. however, no idea what kits are available.. anyone recomend some?

all i can say is ive done some research into this, and there aint really anything for NA starlets.. im hopefully going to start some fabrication of parts and start a litte company up.. and should be able to bring some decent gear to the market for the NA's. all in good time mate. if all goes well, this/next week should see the prototype of the induction kit made, then will have the final peice made. test it and then bang it up for sale. Jay

@ Dean - cheers mate you any futher with yours dude? ok to come up still? @ starlet/na - cheers dude makes it worth while when people like what im doing! depends what you clas as a lot, its got a lot more left than others ive seen, but ihad to get rid of a fair bit. @ bucket - hopefully not mate, if all goes well. what you mean, why was it murder? loud? if so ive just removed all of the sound deadening in the car.. going to be very loud me thinks! best get some earmuffs! on that note, been out on it tonight and have removed the soun