jellybaby

Tried that feller still Comes Up with the above

it says the data is exceeding the max amount ??????? cant up load my build id

Hi all need a new electric wing mirror control switch as mine decided to pack up needs to have the retractable push button to

Love Them wheels if u want rid at any point give me a shout

Today managed to get a day on the car again re bled the clutch felt better but box feels bit notcy still could b linkage but when it goes On to map they be looking at that for me. Fitted my front mount in place today as well as put the bat in the pos where it will Be mounted

Good luck I Tried using that kit u Got to make sure it bone clean and can't apply To much pressure as the glue will pull off

Can u get a price Posted To co40jf please

so today I finished all the engine bits and it started for the 1st time in 4 years few issues I got to sort out now is getting the fuel pressue right and to sort the idle out also have a prob with my gear box fitted a spec 6 padel clutch etc and new slave cylinder etc bled the system through but I seem to be getting a soft pedel still and a strange bite point also have to pump the pedel to change gear ( only moved of the drive and stoped selected reverse crunched to engage then slowly lifted the pedal up and started to roll back diped the clutch as coming to a stop but clutch was stil enga

Hope u Won't kill your engine

Ffs a great one gone I hope the bloke Was not driving like a Nob And it was a genuine accident

Dam missed out if fall through let me no

Do u no the centre bore Size ? Or do u have the spigots for it ? Also These 14 innch

3 plugs in the centre consol area one will b orange they plug Into your inteior loom

Can get non abs lines From Toyota still

Would U sell the seat runners Sep cash waiting

These little things test us to the max but Glad you are getting there feller

So today i received all my parts that I Needed to get the car running and to move my bat to the rear Also roose motor sport coolant pipes for my rad and new fan fitting kit as the one was coming loose. Also nice hydullic crimp for the terminals fitting to the wire Nice 161 quid lighter but She will start after all Of this only thing left to by then is my handling package then off to map so close now having to work on it once my daughter gets to be etc But if my bonas from work comes through August it b alive and mapped fingers crossed

Can the side mounts be removed ??? An bolt to The normal frame ?? As my seats have no side mount points

Defi gauges well Worth the money I have oil press oil temp boost coolant temp And exhaust temp Also will have a aem wideband once It goes to map I be fully covered then

Use a product called power boost u spray it in The inlet while running and it de cokes the engine but just to worn u u won't b able to see much after as u b left in cloud Of smoke

Had The car out today going over all fueling pipes and making sure everything tight ready for testing the puMp etc. Then checked the wiring to the lights and noticed I had no side light for the drivers side. I stupidly removed The loom to it when I removed the abs pump wiring lol Luckily I had a spare engine loom so I traced the wires bk to fuse box and soldered new wires on to The cut ones lol Stupid me lol

Ok Cheers boys

Where do most of you who put the battrey in boot mount your earths please

Harness ?

So today managed to get out on the car Fitted new rear disc and pads with new bearings etc regressed sliders in calipers. Now I have a halk leg as I had to change the old brake fluid out which was Black due to old and water etc Had a self bleader so took about 45 mins and over 1l of 5.1 fluid to get it nice and clear with no air bubbles also re bled the slave cylinder as fitted new etc. Now I need to do a lot of tidying up in the bay need to sort a good Earth out for the battrey in the rear then run the power cables etc. Also got to sort out all my sensor wires as they in a mess atm got t