Frankieflowers

I agree with you even though I bought the two adapters because someone told me there is a sump sensor for oil temp which is not true. I wasted €50. Now I bought the plate he suggested. Thanks

Anyone there?

Where can ai put the oil temp adaptor for the oil temp gauge?

@JayCan someone help me figure out where these hoses go on the Starlet? The same ones in the 4efe Corolla go to the steering pump. The Starlet pump doesn’t have this double hose insert system in the pump. So what are they for?

@JayCan someone help me figure out where these hoses go on the Starlet? The same ones in the 4efe Corolla go to the steering pump. The Starlet pump doesn’t have this double hose insert system in the pump. So what are they for? here are the part number for the valve acid control valve Corolla 17630-15080 Starlet 17630-11050 17630-11060 i need to knOe where they are and where they go. Thanks

Can you help me figure out these parts? Where connect? @Claymore @Sam44

I was thinking that I could put the air splitter for the turbo boost on the map sensor?

No. Tell me more about it. I bout oil pressure sensor and oil temp sensor adaptors to fit the the extra gauge sensors.

Hi guys. Can you confirm which sensor on the rte engine in tgese pictures is the oil temp and which is the oil pressure? Also, where should I connect the turbo pressure air pipe? Thanks @Claymore @Sam44

Hi. I’n looking for the same info in 2021.the link os unavailable. Can you help? Thanks

Hi! I am in the same situation looking for the Oil temperature location and oil pressure locations to fit the sensors. Unfortunately this thread is old and the pictures and the link are not available anymore. Would someone help me out to do what Marck explained?

What can I use instead? The tip of the top hose n.5 is cracked. I need an alternative. Or maybe I can find a second hand one?

We are tearing apart both rooms to make one from the Corolla that will include Starlet ECU loom. Fuse box in and out wires taks time to organize. Let me know if you can help with colors and connectors.

A lot of work but fun. My research goes back over a year. I don’t have the downpipe with Cat on the fte. I need to buy a Oxygen temp sensor 89465-10020 and put it in the custom downpipe that goes to my Corolla cat. Could you please tell me which sensor I should buy? The original DENSO Costs $170. Is it possible to buy a generic cheaper one? I found a few for 30 bucks but I want to be sure.

Today we tested the pipes that I will bring to the hydraulic shop to get the connectors swapped. We’re gonna swap the gearbox and wait until the loom os ready. Wires from both cars have been compared and we decided to keep the engine bay Corolla loom and add the Starlet ECU loom to the Corolla fuse box. Seems smarter. IMG_1825.MOV

What’s the capacity in liters of the Starlet Glanza V ep91 top mount IC?

here some pics of thr Corolla cabin loom Centrale ECU loom and left side fusebox loom

here some pics of thr Corolla cabin loom Centrale ECU loom and left side fusebox loom

What is the easiest way to match the FTE engine loom and ECU canin/cabin fuses connectors to the Corolla cabin loom? Mu guy analyzed witg a tester wire by wire every connector in and out through the engine bay fuse box loom. He labeled them tomorrow he will do the same with the Corolla engine bay loom. We’ll match them all and supposly every ECU information will be trasfered tochis destination. Meaning the lights, sensors through the fuse boxes and directly from A to B points. There is no other logical way to do it. The only plug and play possible withh probably be the front and rear conn

I have the entire loom from the Starlet cabin and the engine bay. My goal is to match the Corolla cabin loom to the Starlet engine bay loom and ECU.

Thank you! so I should put the 4efte lambda in the Corolla exhaust?

I have a question. I am swapping a FTEfrom a Glanza ep91 (1997) in a Corolla E11. I would like to know if the Corolla lambda is compatible with the FTW ECU.

Here we are fi ally doing the Swap of my life. I’ll poat alle the pics when I’m done. so far I can confirm that the Corolla vs Glanza V AC are not interchangeable. The wheels have different wheels alignment. No way it’ll work. We to swaped the steering pump wheels, together with the entire steering pumps but it didn’t work. Not because they have different distances between engine bolt holes., but because the fte pump support at its minimum regulation wheel doesn’t allow the belt to be tightened. The two engines have diffefent pattern and width) and the diametrers are different. the

What’s the diameter of the internal hole? Thanks