Jump to content

JackStar

Member
  • Content Count

    290
  • Joined

  • Last visited

Everything posted by JackStar

  1. Has anyone done it? will the gap look silly?
  2. My mate has just got a gt and it has a roll cage in it but hes not to keen on it, so would it fit in my glanza or are there major differences? Its also the gt is a sunroof model, if that makes a difference Jack
  3. thats right, use the 4efte head and sump with the 5efe block
  4. I dont need the head, just the block and crank It does look like it may of been out side for abit but never mind
  5. Am i the only one that cant get a glanza? Im on level 8 and ive checked the used car section after every race, but they never come up. What level were you lot on and how much do they cost roughly? Jack
  6. I think I've got the engine, just waiting for him to confirm when I can pick it up.
  7. Welcome mate, Have a look in the traders section and look for EP tune, thats where your'll find what enzo sells. Jack
  8. My bad ,what you search for to find the kit??? I can never fine them only for the kp chassis, or front arm kits. Jack
  9. I know this is an old post but ive just seen it and the number plates almost the same as mine lol Sorry its a rondom post. Jack
  10. Get all the bushes you can made up, i had a look for some bushes for my civic the other day and you can get kits that replaces every bush on your car, need some thing like this for starlets, just an idea. Jack
  11. Hi, over the last couple of days ive noticed that the handling of the glanza isnt what it used to be, and when i boosted it would pull to one side, so i jacked the car up to find that 17mm bolt on the front bushes was loose and had undone itself by a few mm and the same on the other side, i found this before on the passenger side but tighten it up and didnt think anything of it, what could be the reason for this, Worn bushes? i havent undone these bolts before so its not like ive left them loose. Jack
  12. i didnt know that, whats the difference? ive had n/a pads in my glanza before now, and glanza fitment pads in n/a
  13. all starlet front pads are the same, the only different is that the glanza has slighty bigger discs and as a result will have a slighty different carrier to space the caliper out alittle. Jack
  14. i did as adz sportif turbo said and used just the 4efte engine and loom and made it fit the ecu plugs ive got all the pin outs you may need, if you want, will also need the ingintion amp and turbo map sensor. Give me a shout if you want a hand, we could nick the bits from your bros glanza when he gets it lol. Jack
  15. Is this my old starlet sportif? If it is you first need a boost controller and adjust the actuator to stop it hitting fuel cut. Jack
  16. Thats so cool, i was thinking the other day of what a glanza pick up would look like. Need more pics. Jack
  17. So a good mani then? I'll have to fine out about the rad when i put it in lol.
  18. Hi, what manifold is this? I need a downpipe for it, but im not sure if any downpipe will suit it? and also is it stock rad friendly? Thanks jack
  19. The gear ratios are different, the n/a having more accelration and less top end, and the turbo having more top end. Im not sure on weather one is stronger than the other, but i had an n/a box on my turbo conversion, and its still going strong. Jack
  20. Ive got an uprated fuel pump but its not that. Jack
  21. I'd probaly say what asad ep5dr said. What you getting next then mate Jack
  22. cool cheers mate i will try that tomorrow. Jack
  23. Recently ive had a noise that sounds just like a boost leak, but the thing is that the cars running fine and is still boosting ok, the bracket on the top of the intercooler was broken which resulted in a silicone boost pipe being worn through, now the intercoolers fixed and ive replaced the silicone pipe, but the noise is still there, its a really high pitch squeal just like a boost leak. I cant hear it at full boost but that may just be as the exhaust is loud. I thought i was the bov leaking so ive changed that for one that was fine in my gt, but made no difference. Maybe a inlet mani gaske
  24. Well it need new brakes all round and a front wheel bearing so they will be first, then finish the boot tidy up, then start tidying the engine bay, then start looking for more power Jack
×
×
  • Create New...