glanzagee
-
Content Count
631 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by glanzagee
-
http://tighecams.com.au/ http://www.newman-cams.com/ just out of intrest what your intentions of use pls pls pls dont say just so it sounds good at idle
-
http://www.pipercams.co.uk/pipercams/www/product_nav.php?type=C&cat=CM&man=25&engine=325
-
No tq adjustments in the map if anything I need more tq but the gearboxes tend too disagree with me need a gearbox every outing and I'm not in the mood too get classed as DNF. 4 boxes so far and all with the same symptoms 3rd gear gears clean off
-
c52
-
Sticky as fook but could be better I'm limited to what I can use due too using 16inch rims
-
Tbh 6/5 was good for fast road use would suck up a lot of the holes/bumps &yumps but for a circuit or smooth road going round bends I had issues with the inner rear wheel cocking up at least 8inchs and the wheel diagonally too the inner dive in too much heat build up and loss of traction etc etc
-
6kg front 5 kg rear I'm on 8kg front 7kg rear and still not happy this is circuit and hillclimb use and using Pirelli rx7 Tyres similar too what you use phil
-
i read the p.m just let me know when your ready
-
Price is £250 it's new and I don't do PayPal pickup only north London
-
-
23c min 30c max for one of thoses files i also live in the mediterranean we see temps of 40c plus summers and winters of 20c
-
what you got the fan cutting in at 80 odd? you could try getting it to cut in a bit early sitting at 90 at wot is ok but could be better
-
makes me wonder about all these road cars with thoses civic rads ! when you putting a oil cooler in may just drop your water temp a few more c
-
what was the temps on the old rad 95-110c ? what do you see know 85c max ? honda s2000 rad ?
-
Your on point but there's other things that can be done too Above is based on 5efhe 50wt oil Rev limited to 8300rpm Modifications too oil gallery's !!! None to pump or pressure relief valve Hot pressure are no lower than 4 bar even at idle Cold pressure at idle 7bar
-
-
-
p.s dont forget too get the angle grinder out for the one stud thats 14mm longer
-
-
-
-
looking good on your last outting any improments since my last comment ?
-
Never left just keep quite and watch there's really not much too talk about on the forum....
-
http://www.ukstarletowners.com/topic/4625-show-us-your-engine-bay/page-3
-
