Socks

still time to get your entries in folks!

2 people who i know and trust have done this and got lower temps! A simple U-Bend of silicone will bung the ports up on the thermostat housing. Many people don't realize the coolant going thru the turbo isn't pumped through, its just connected to the water system!

Dynos and mappers will be the issue here not the LSD... They all vary Go back to the original dyno and do a pull see what happens!

Plug n Play ECUs arent brilliant for fueling... If fueling was perfect (emanage) and a decent map would be fine!

Ok. this is an identified issue now! Im on it!

I Told You So......

this always puzzles me... The amount of people, ive spoke to. That describe something as MINT CONDISH... Or Very Very good condition... and when I see it, my opinion is either fucked or average or even poor in some cases... As with anything, its the odd few that ruin it... But please, don't brand the UK as bad for that... As I certainly wouldn't be happy if that was described as good condition...

look on ebay dude. only worth there weight in scrap metal on there..

good video... However u still need to do a conventional update... As it isnt clear exactly whats been done to it

torque is nothing without matched power also... Which is why diesels feel way faster then they actually are... old video... but still: http://youtu.be/FQjn6iATI74

Sits really nice Zoe... and different rims front and rear is so JDM i may have to do the same

Looking good there Luke! You will Love the Typhoon kit... My mates TS has one... They Scream through then! However.... Its still not Boost...

there ok at spring pressure... If its a demon one... Trying to raise with a ebc is a joke tho, they leak...

Automatic Glanza Gear Ratios must be waaaay better then

With the rear mount and driveshaft £300-400 Pointless without, cant be used!

on a ct9... Havent even bothered trying with current setup lolz

If clutch is aligned good... Its just a case of twisting the box till it slots into the clutch Its a pain to do this in the car... Id rather take the engine out and do it lol

Just put in the stock weight for now... which is 920kg... Can always update at a later date mate!

Post your result on www.s314kba.co.uk/leaderboard Motion!

mapping most likely to cause this...

ran all the betas so far... 4 is great on a 4s... works really well!

in other news... You have to choose a pic to enter Lottie! im afraid!

Looks Good... But needs UKSO stickers

Fronts. Make sure you secure the brake lines... Taggys GT and another starlet had brake lines that rubbed on the body of the coilovers and caused a failure... Resulting in NO BRAKES... Get your car tracking done STRAIGHT after, as the geometry will be MILES out after fitting them coilovers... Set them all to the softest settings... Lower the car until it just scrapes on the arches. Then stiffen them till it stops The rears don't matter left or right... But the fronts DO matter left and right... If u get stuck... leme no Zoe im off work tormorrow x

PCIe... AGP is ancient!