Jump to content

Simon

Member
  • Posts

    767
  • Joined

  • Last visited

Everything posted by Simon

  1. Because of the size of the CT9 anything over 1 bar it just turns into a heat pump and you will never get any more power however much boost you run. All this "bleed valves are shit" is bollox a good bleed valve is as good as any Electronic boost controller as they do the same thing. I ran a Dawes device for over a year holding a CT9 at one 1 and nver had boost creep or a spike once it's all down to fitment. Running 1 bar on a CT9 should never need a fuel pump, a FCD and a rising rate fuel pressre regulator setup up on a rolling road will be fine. The Emanage is good but £300 is only the start fitting costs and mapping will easy double that figure. Simon
  2. Simon

    hi guys

    BOV is personal choice mate take a look on ebay there is often some good second hand ones for sale on there from the different sellers in Japan. Only the Japanese comanys seem to make subframes for starlets so getting aftermarket sets in can be a costly process unless you can fabricate your own. As for the Din pannel if you go to the scrappys and find an EP91 starlet they have a small cubby hole hat can be fitted there or toyota sell them. Oh and what wheels is it on? Simon
  3. I did 154.5 hours in the last fortnight I'm often out the house at 4a.m. and get back 9 p.m. ish
  4. Simon

    wheels!!

    if i wasnt saving for more power then i'd have had them me sen mate
  5. Simon

    wheels!!

    I've had 2 sets of GTIR rims on mine mate they will fit center bore might want a spigot ring if your picky and offset might be +/- 5mm either way of the ideal but it don't matter that much. Starlets often come over on anything from 35 to 40mm offsets. Simon
  6. Simon

    wheels!!

    GTIR's tend to run bigger brakes that need 17" rims to fit over them, 3-400 hp and a heavier car needs good brakes and they are crap as standard. Simon
  7. Simon

    wheels!!

    Check the gtir boards guy selling some bronze TE37's £500
  8. Simon

    wheels!!

    If you have £500 you could have the real deal if your quick
  9. Cassius still has a very mint silver one for sale that all been done. As for buying an import because it's less likely to have been ragged....... most cars that come from japan have been tuned in one way or another alot of the time they are put back to stock in japan as there is a big business in second hand modded parts so owners return the car to tsock and sell all the mods. Simon
  10. You should be ok but i would change the shocks while you are doing it.
  11. Blitz
  12. Not original colour but yeah looks good. I have a reverse scoop the same as the one on that car for sale by the way... Oh and factory colours were: Black Red Sliver Blue White
  13. Ah small world mate i just know scott from when i used to see him and billy at the shows always used to have a good chatt! He'd only just got the rex when i saw him last will have to catch up sometime if i get to the shows this year. Did you mate custom make the brackets for the ap's? would be interested to hear what he has done. Simon
  14. Shaun any more info on the white starlet i heard 300hp being mentioned and ap brakes? Also do you know scott who used to own the converted glanza s down your way? Simon
  15. Hi Phil car has done about 65,000 kms so about 40,000 miles. Let me know if you want them mate. Simon
  16. Phil i've got a perfect set of calipers from my glanza which are the same as the uk starlet if you need them will let them go cheap just postage might be a little bit. Simon
  17. Gaz hmmmmmmmmmmm same colour of the cruise starlet's but i'm not that brave take a brave man to drive a pink car!!!!
  18. you'll see when it's done mate
  19. When i had the glanza at first i had 17's and a 40mm drop they were a ET40 and i removed the front arch liners and bent the brackets up but appart from that all was ok. Simon
  20. Think red would look nice mate. I'm also looking at a colour change at the moment but what i have in mind deffo will not be to everyones taste but thats why i like it!! Simon
  21. Simon

    Tyres?

    Send camskill an email too they were very cheap for toyo when i last looked about
  22. Brush handle up either one and it's a ready made wheel barrow Go for something more jap looking mate if you want to make it different try and get the guys to put the end can at an angle.
  23. M12 x 1.5 so yes they will fit. "Tip..... the Americans call them lug nuts you should know the rest" Simon
  24. Fensport have a very very tidy white one that for sale at 5K check there web site. Cassius of power imports has a very tidy silver one but it's a little out of your budget at £5750 Best other one i can see on the trader is this one: http://www.japperformanceuk.co.uk/stock.html Nice list of mods looks tidy and within your budget. Simon
×
×
  • Create New...