Simon

keep it coming mate when cat we strip the cut down

I have an EP91 rear cage for sale for £350 I'm breaking my glanza so hae lots of parts for sale

Thats cause you were to busy stealing your own camera mate

Because of the size of the CT9 anything over 1 bar it just turns into a heat pump and you will never get any more power however much boost you run. All this "bleed valves are shit" is bollox a good bleed valve is as good as any Electronic boost controller as they do the same thing. I ran a Dawes device for over a year holding a CT9 at one 1 and nver had boost creep or a spike once it's all down to fitment. Running 1 bar on a CT9 should never need a fuel pump, a FCD and a rising rate fuel pressre regulator setup up on a rolling road will be fine. The Emanage is good but £300 is only

BOV is personal choice mate take a look on ebay there is often some good second hand ones for sale on there from the different sellers in Japan. Only the Japanese comanys seem to make subframes for starlets so getting aftermarket sets in can be a costly process unless you can fabricate your own. As for the Din pannel if you go to the scrappys and find an EP91 starlet they have a small cubby hole hat can be fitted there or toyota sell them. Oh and what wheels is it on? Simon

I did 154.5 hours in the last fortnight I'm often out the house at 4a.m. and get back 9 p.m. ish

if i wasnt saving for more power then i'd have had them me sen mate

I've had 2 sets of GTIR rims on mine mate they will fit center bore might want a spigot ring if your picky and offset might be +/- 5mm either way of the ideal but it don't matter that much. Starlets often come over on anything from 35 to 40mm offsets. Simon

GTIR's tend to run bigger brakes that need 17" rims to fit over them, 3-400 hp and a heavier car needs good brakes and they are crap as standard. Simon

Check the gtir boards guy selling some bronze TE37's £500

If you have £500 you could have the real deal if your quick

Cassius still has a very mint silver one for sale that all been done. As for buying an import because it's less likely to have been ragged....... most cars that come from japan have been tuned in one way or another alot of the time they are put back to stock in japan as there is a big business in second hand modded parts so owners return the car to tsock and sell all the mods. Simon

You should be ok but i would change the shocks while you are doing it.

Blitz

Not original colour but yeah looks good. I have a reverse scoop the same as the one on that car for sale by the way... Oh and factory colours were: Black Red Sliver Blue White

Ah small world mate i just know scott from when i used to see him and billy at the shows always used to have a good chatt! He'd only just got the rex when i saw him last will have to catch up sometime if i get to the shows this year. Did you mate custom make the brackets for the ap's? would be interested to hear what he has done. Simon

Shaun any more info on the white starlet i heard 300hp being mentioned and ap brakes? Also do you know scott who used to own the converted glanza s down your way? Simon

Hi Phil car has done about 65,000 kms so about 40,000 miles. Let me know if you want them mate. Simon

Phil i've got a perfect set of calipers from my glanza which are the same as the uk starlet if you need them will let them go cheap just postage might be a little bit. Simon

Gaz hmmmmmmmmmmm same colour of the cruise starlet's but i'm not that brave take a brave man to drive a pink car!!!!

you'll see when it's done mate

When i had the glanza at first i had 17's and a 40mm drop they were a ET40 and i removed the front arch liners and bent the brackets up but appart from that all was ok. Simon

Think red would look nice mate. I'm also looking at a colour change at the moment but what i have in mind deffo will not be to everyones taste but thats why i like it!! Simon

Send camskill an email too they were very cheap for toyo when i last looked about

Brush handle up either one and it's a ready made wheel barrow Go for something more jap looking mate if you want to make it different try and get the guys to put the end can at an angle.