ryan lang

best bet is to set it right to zero, then start the car and it will climb up itself

welcome to the forum Beth. upload some pictures of the car when you can

these are my photos its definitely a worthwhile mod to keep intake temperatures down

welcome to the club mate

camber of the road?

the front and rear seats can be made to fit with 1 or 2 small modifications door cards cant be changed straight swap though

They'll let you know which side your allowed to overtake on, and which side to be out the way should anyone be coming up to pass you

front end you'll just need discs, pads and carriers. rear end you'll need the entire beam, discs, pads, callipers and carriers. and glanza handbrake cable too

they are not the best pics in the world to help explain, but they still slide back and fore etc so they are pretty decent admittedly a bit stiff to slide if fitted to an ep91 because when we welded them we used an ep82 shell (my old GT) to bolt the rails to, to tac weld the bars in place but a good safe set of sliding rails none the less you'll see what i mean when you take the standard one apart anyway dude

hopefully these are of some help to you aha. managed to track down and get some pics of mine not the best but hopefully its a help lol the sliding part of the rail is 2 parts, so ive simply just welded 2 bars from either side, and drilled holes in it ryan

urm greddy emanage ultimate id go for, but the emanage blue will be more than capable

http://www.ebay.co.uk/itm/Jdm-Flare-Toyota-Celica-Corolla-MR2-etc-/281315412539?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item417fb48a3b

id go with some management first dude. cams arent really needed on td04 to be fair also go with some coilovers over lowering springs because springs are crap

welcome bud, auto GT's do pop up from time to time you just have to always be on the look out

welcome to the club bud. cars looking nice! so many red n/a's signing up since i lost mine in january

no ive got work experience at angelesy with a load of hairdressers unfortunately

lovely little base dude

ahaha

you must really want a stand pass mate

buy a clean shell? if theres such thing haha

i also dicked a non turbo scoob in my little silver n/a aha

looks like it needed rescuing ever more tempted to get another but i know i shouldnt haha

i modified stock rails with a bar bought from b&q but i unfortunately dont have an pictures :/ all i did the was cut the old mounting points (that the seat bolts to the rails) off the standard rail and then weld 2 bars across the rails and drill holes for the seat to bolt too

err noooo! dont get a non turbo scoob aha

20v it after killing it