-
Content Count
1017 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by raffa_mk
-
Which front lip to put onto remix front bumper
raffa_mk replied to raffa_mk's topic in Exterior Design
Was thinking if the jam front lip will fit it? -
I have a remix front bumper and want to put a lip on the front to lower it . Here's how it stands ATM.
-
I will take one
-
The 1st and 2nd gear on the 6speed go very quick on a 4efte I used it on both fe and fte and wouldn't regret changing from 5 to 6 speed. Less load on the engine and helps if you have a big turbo strapped on your setup, I've run ct9 and ct9 hybrid and acceleration is very quick, also cruising on motorway in 6th is cool and if you drop it to 5th for some fun, normally 6th is spot on motorway from 50mph Limit is around 145 but even on track days it's very rare you reach then speeds on the straights So for both street and track it's very good and I've got a quaife LSD which helps with 1st and 2n
-
Here are some pics of it fitted
-
Yes that's right, he might have bought it from Japan's bits its bit in his possession and it will take approx 3 weeks to come to England first before he sends it your way
-
Just finished messaging the guy selling it, he wants 500 or close offer and it's still in jap land and will take 3 weeks to come to uk
-
How long do they normally take to do a stage 2 forge block and satge 2 ported head? Been looking at there packaged and they seem good. Website not good for emails, have they got a contact number?
-
^ Thanks mate. Credit due to Lawrence badger who took the photo. The Boy's got skills, more pictures will follow once cars back on road
-
I've been having idling issues, had vac pipes check and wiring , along with coolent temp sensor changed etc, did a compression check and it was low on cylinder 1, found out to be a crack ring on the piston. Car use to drive ok , when warm idle would drop to 600rpm and sometimes stall and it happens when dipping clutch at times from changing from 3 to gear 2. Going to go forge now as engine can't cope with power.
-
Make sure it's all emptied out and packed well Don't want it covered in oil when I open the box
-
JD tuning EP91 civic rad brackets *NOW SOLD*
raffa_mk replied to Jamie_VF22's topic in Starlet Parts For Sale
Paid -
JD tuning EP91 civic rad brackets *NOW SOLD*
raffa_mk replied to Jamie_VF22's topic in Starlet Parts For Sale
Pmd -
Apexi Power Fc with hand commander & harness ep91
raffa_mk replied to JordanEP91's topic in Starlet Parts For Sale
Would you sell the commander holder separately ? -
May have my st185 twin pots available if my buyer is in no rush for them, how long would you need them for?
-
Pmd for oil cooler
-
The scammers should be named and shamed!
-
Which ecu's can you use which will work with coil pack? Emange? Apexi power FC ? Or independant ecu to control it like aem?
-
I've got LSD in my 6 speed box , but mines a 1.3 6 speed box from the 1.3 g6 Not sure if 1.6 are different bolt fitting?
-
Is that peak watts power or rms power? I do like ice systems but I think you could have changed the lay out, Leave the subs in back 2 facing to boot lid and 2 smaller subs facing up With 6x9s in rear quarter panels and the smaller speakers n tweeters at front for a well balanced experience whilst in the car and out I've still got some of my ice kit which I would put in a different car Here's what it looked like in the starlet
-
Got it at a good price ^ as a rough guess up to 180 bhp