StuDoc 72

Definately a good idea until his head is fried with people expecting him to come up with super rare parts he cant find lol. All the best with it though can see me being a regular customer.

Aye mate always said that shes a cracker for those reasons. Good to see another bear on here lol.

0.7-0.8 on idle is correct. 0.8-0.9 when cruising down the revs. 0.04 is wrong tho unless you arent getting any boost lol.

You went to her gig? I hope you were forced lol.

Awww that old chestnut lol. Aye you needto get a drive cant buy it and not test it plus there might be sumthing wrong no point putting in all that work to drive it and realise you have a worn rear diff mount or sumthing.

Id still rather have the GTR. R8's are shit a rather shadey friend of mine had 1 for 4 months during the summer.

As in Amy MacDonald the singer? Never seen it gna watch it 2night but if it was her shes an absolute darling and a good Rangers girl lol.

No worries mate I've fitted it just now just would rather get a filter on there dont want the pressure sensor getting corroded inside. I'll try and take a few pics and anyone whos struggling can look on my build thread for help.

Haha it must be heart wrenching getting it all immaculate then ust ripping it straight to bits. Are you gna drive it 1st to see how painfully slow it is lol? Aye the depo stuff looks decent the EBC's work well and they look smart cant complain at those prices.

Got a DEPO one off james mate. £100 canny go wrong with that. Plus its ideal for me it went into my pillar pod and replaced my old boost gauge so no need to make holes in dashboards or have nasty dials anywhere. Ill stick up a few pics later on mate you can get a swatch. Is it supposed to arrive with you today or just in port? Whos is couriering?

Yes and a new engine when it overheats

Half a tank does me about 150-200 miles at best. As soon as you mod the engine it will run rich. Get it mapped or live with it lol.# As for the lambda wait till the engine is hot and test it with a multimeter. If you have a reading then its working fine. If not then its raped.

Yep not many of the newbies coming into this thread I think they might still be finding there way around. Either that or they have found out what they needed to and bolted again lol. As for mine shaun fitted my boost controller and TRD dial surrounds at the weekend this makes me a happy man lol.

Absolute doddle to fit. 1. take your loop vac hose off you turbo/actuator and replace with the new silicon hose then cut it at the half way point. 2. Run the piece coming from the turbo to the IN port on the solenoid and hose going to the actuator to the OUT port. 3. Mount the pressure sensor on the bulk head and t-piece into the vac line leaving your mani that would go to your bov and connect to the pressure sensor. 4. Run all the wires through the bulk head and plug them into the ECU unit. Connect an earth and a live. 5. Mount the pod unit and enjoy.

Think I already meantioned these via PM but thought I'd stick it up in here aswell for good measure as im quite keen to get these parts. Basically looking for as many of the TRD interior carbon fibre panels. I have the dial surrounds so far but need all the rest of them. Preferably TRD but any of the interior carbon fibre panels would be nice. Cheers

There isny half is there haha. Welcome mate am sure youll find plenty cars on here that will take your fancy.

I've fitted mine today jus needto set the gains n warnings tomorrow. Anyone else only get one filter?

Id maybe come if theres a few of us.

Will these be available after the group buy at retail? Want to get one but planning on a new car this month so need my spare cash for a deposit rather than starlet parts lol.

Mine came today hoping to get it on soon as. Only thing is according to the instructions i should have 2 filters and 2 t pieces but i only have 1 of each? Can you shed any light on this?

True true and true. Louis Theroux = The fucking man! Give it a watch its defo worth it but only if you havent seen game of thrones. Walking dead and Game of Thrones are the 2 top series in my eyes.

Yes you can do im sure mine was just a hammerite spray made by a different company was like nn-62 or some fucked up stuff just looked like hammerite got it from a hardware shop. I didnt use primer myself but it would defo be beneficial. Any metal primer will work. Its all in the prep though. Spend time getting the surface smooth and clean and free from blemishes and will make finishing it 10x easier and better.

Crystal meth or Ice as its know hasnt hit the UK yet thats why people here are still hung up on crack and smack. Its big in places like USA Austrailia and Asia. I know someone who tried it when they were travelling but never seen an addict before.

Cheers mate shame the rest of the bay is a bit more of a riot lol.

Pretty much sand it n paint it. As easy as that. I used an anti rust outdoor paint to do mine. Was thicker so covered any imperfections on the cover and never needed laquer, its also much harder wearing. A primer is more important than laquer tho as you painting onto metal. This is how good a finish I got took about an hour. Oh and mine wasnt painted before so I had to start of with a corroded slightly oily cover.