Jump to content

aidanep71

Member
 View Profile  See their activity

  • Content Count

    411

  • Joined

  • Last visited

 Content Type 

Everything posted by aidanep71

  1. aidanep71
    your synchro is f**ked it will more than likely need changing you could try changing the oil it may or may not help
  2. aidanep71
    cool thanks is he a trader on here or do i just go to his website
  3. aidanep71
    bump
  4. aidanep71
    there not comfortable either
  5. aidanep71
    which ones do i need for an emb to map a starlet all i got was the basic harness and will be getting the map sensor and harness
  6. aidanep71
    they look unreal one of the lads has one on his glanza with the center box cut out and it sounds mental
  7. aidanep71
    check your clearance between the coilover and your brake line bracket on the chassis mine was very tight to that
  8. aidanep71
    my teins are holding up perfect anyway
  9. aidanep71
    http://www.ebay.co.uk/itm/Honda-Civic-92-2000-52mm-Core-Radiator-polished-A045-/170640010025?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27baefeb29 this is the one i got
  10. aidanep71
    loads of wd40 should help lad
  11. aidanep71
    its the pressure switch connector you need to loop
  12. aidanep71
    if you have the a/c removed you should have a few blank vac lines on your inlet use one of them
  13. aidanep71
    thought that its cheap for pistons and rods are these not like £400 each normally
  14. aidanep71
    i love it but i dont realy do much racing just more fun up in the forrest burried in s**t lol
  15. aidanep71
    if you have an old ct9 mani the studs that go into the turbo are the same as the ones that go into the head the nut's on them are locking which can be used aswell
  16. aidanep71
    removing the a/c makes hardyl no difference on its own but with it out of the way you can re locate the air filter to the front which makes a good difference..get some pics up Aidan
  17. aidanep71
    that jordan civic is sexual
  18. aidanep71
    worth the hassle then
  19. aidanep71
    its a TB25 diesel turbo type 452162-1 into google
  20. aidanep71
    would i even get 5hp and some torque il be running a garrett turbo aswell
  21. aidanep71
    would there be any majour power gains for the hassle so no
  22. aidanep71
    i'v been offered a set of these but the lad dont have the shims is there a way i can use my own shims or would i have to get them out of a 5efhe
  23. aidanep71
    check the voltage on the battery while running and at about 3k rpm revved up a bit it should be near to 14 volts
  24. aidanep71
    a friend of mine has a facelift t sport rolla with 40k miles on it and he has already had to change the lift bolts cheap enough an 1 euro each x16 and also the cams not so cheao at 800 euro i wouldnt be too confident about them to be honest
  25. aidanep71
    dont no of any places round here that make exhaust boxes would rather just buy one anyway
×
×
  • Create New...