Jump to content

H_D

Member
  • Posts

    1866
  • Joined

  • Last visited

Everything posted by H_D

  1. Only JAM did the cast iron manifold and Blitz did a cast iron downpipe
  2. Sold. Pls lock
  3. Need gone. Make me an offer
  4. Sorted. Pls lock
  5. As above pls pm me
  6. Toms didnt make an ecu for the EP91. It was only available for the ep82. Same with the mines ecu
  7. ^^^
  8. H_D

    Glanza radiator

    Bump - need a stock glanza rad asap
  9. H_D

    Glanza radiator

    Cheers mate
  10. H_D

    Glanza radiator

    Looking for a glanza radiator. Must be in good working order. Thanks
  11. Sold.
  12. If anyone wants their calipers rebuilt. Im happy to do them providing you send me the parts and calipers
  13. Bump - open to offers
  14. Open to reasonable offers on these calipers. Please bare in mind the pistons cost £110 for the pair from toyota and the seal kit + new copper bolts and washers cost approx £70. I built these up for a local EP owner who only paid a deposit then decided he didnt want them anymore due to other issues arising on his car.
  15. Came off my glanza 2 years ago and been sat in my garage since. Rebuilt 4 years ago and covered a maximum of 4k miles No smoke, no shaftplay, ported wastegate with the usual small crack but works perfect. Located in leicester. £110 collected or £120 posted + 4% paypal fees
  16. Pair of rear calipers. Sand blasted. Cleaned. Primed in anti rust Zinc primer. Painted silver in high temp caliper paint. Brand new seals, pistons and copper bolts with washers. Please see pics. Located in leicester. Price £250 collected or £270 posted + 4% paypal fees. Any questions please pm.
  17. H_D

    Loom plug

    Managed to locate a new one. If anyone else needs this connector you can find them on ebay, search for - Toyota Water Temperature Engine Temp Sensor Connector Plug - LX04
  18. H_D

    Loom plug

    Looking for the 2 pin loom plug that fits the sensor below. Ideally with a bit of wire on the end of it.
  19. Thanks for the replies everyone. all sorted
  20. Thanks mate. I found the wire. When i dismantled the loom plug it had a bit of wire on it so it matched the broken one
  21. I broke the connector on the loom side since its been off the road for a long time and finally putting it all back together. I think its a black wire as thats the only broken wire i can find. Just want confirmation before i soldier it
  22. Anyone?
  23. Can anyone confirm the colour of the o2 sensor wire on the engine loom side for a 1996 V? Thanks in advance.
  24. Got an immaculate pair if still needed. Freshly rebuilt with new pistons, seals, sandblasted, anti rust primer and silver paint. They look and function like a new set
×
×
  • Create New...