H_D
-
Posts
1867 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Events
Everything posted by H_D
-
just use some fine mesh
-
Use a celica gt4 map sensor, its a direct fit but the tuner will need to scale it
-
E1 and TE1 need to be bridged whilst setting timing
-
Since i added extra earths ive not had any issues
-
Pm me if u still need a crank pulley
-
If its using a ct9 core the fittings are different. If its a td04 core then u need all the bits i mentioned in the original post. Will the oil feed be positioned facing straight up
-
If its for a ct9 that sits in the stock position just use the original oil and water lines. My guide is for a TD04 🤦♂️
-
Send me a pic of your set up il have a look for you
-
Got a crank pulley here. 1 tiny chip on it
-
You need the spring clip. I took 1 off an old release bearing.
-
as above im after a 4efte block and crank
-
Looking for stock TMIC cover please PM me Thanks
-
Purchased these new years ago and never used them as i ended up fitting an anti lift kit instead. Any idea on what they might be worth and would anyone know if they would fit an ep82?
-
hdi intercoolers are a/c friendly
-
You will still hit fuel cut on the stock ecu. Best bet is a blitz access ecu i have seen some made for AT transmission
-
I think the standard strut brace is far more rigid than most aftermarket ones
-
10 year challenge 🤣
-
still got this, open to offers
-
Parkers will have them
-
Car choking issues under boost after changing knock sensor
H_D replied to Dexxterious's topic in 4E-FTE Engine Discussions
-
Car choking issues under boost after changing knock sensor
H_D replied to Dexxterious's topic in 4E-FTE Engine Discussions
If the throttle body pipes ae not futted correctly you will be getting water in your engine -
Sorted pls lock
-
the belt should turn 1/4 with 10kg of force, if its too tight or too loose it will squeal
