SydesGT Posted May 10, 2016 Share Posted May 10, 2016 Hello everyone,Recently got a standalone ecu fitted to my gt turbo from EcuMaster and the company is willing to do forum discount for members who wish to have a standalone. Anymore info then please messageThanks Quote Link to post Share on other sites
richardc9052 Posted May 10, 2016 Share Posted May 10, 2016 Nice one. Been praising ecumaster for last 2 years with nobody listening. This might help to change the stale route of over paying for similar products Quote Link to post Share on other sites
Phil Posted May 10, 2016 Share Posted May 10, 2016 Did i sell mine to you Richard? seem like a great product. Phil Quote Link to post Share on other sites
SydesGT Posted May 10, 2016 Author Share Posted May 10, 2016 Brilliant product, highly recommended Quote Link to post Share on other sites
richardc9052 Posted May 10, 2016 Share Posted May 10, 2016 (edited) Did i sell mine to you Richard? seem like a great product. PhilNo, might have been another Richard? I've bought 2 off ecumaster myself and ordered a couple for people in my area.To be honest even like the det3 is so cheap you can use it just for launch control and boost control and it's better (ignition retard, fuel enrichment and ignition cut) and cheaper than any combination of the likes of omex and a random ebc. Edited May 10, 2016 by richardc9052 Quote Link to post Share on other sites
Phil Posted May 10, 2016 Share Posted May 10, 2016 Yeah seen the spec of a det3 and always thought they would be some option compared the the likes of an emanage or dastek.Can't mind who mine went to, but was a member on here.Phil Quote Link to post Share on other sites
turbo-fever Posted May 11, 2016 Share Posted May 11, 2016 This what's going on mine next week hopefully Quote Link to post Share on other sites
sbk replica Posted June 7, 2016 Share Posted June 7, 2016 also running a emu, awesome piece of kit! what ignition trigger do you use when running you're emu ? any knowledge of what sort of ignition timing you run ? let me know if you have any info! Quote Link to post Share on other sites
turbo-fever Posted June 7, 2016 Share Posted June 7, 2016 Excellent bit of kit got mine up and running on ecumaster now aswell Quote Link to post Share on other sites
5T4R7ET N/A Posted June 8, 2016 Share Posted June 8, 2016 (edited) Det3 (new one around 650)? Edited June 8, 2016 by 5T4R7ET N/A Quote Link to post Share on other sites
aleximport25 Posted June 8, 2016 Share Posted June 8, 2016 I would be very keen to get a quote for both systems :-) I was thinking of getting the det3 but since standalone has been brought up well you know haha Quote Link to post Share on other sites
aleximport25 Posted June 8, 2016 Share Posted June 8, 2016 Det3s on eBay are about £150ish Quote Link to post Share on other sites
richardc9052 Posted June 8, 2016 Share Posted June 8, 2016 Det3 is semi standalone ;) Quote Link to post Share on other sites
aleximport25 Posted June 9, 2016 Share Posted June 9, 2016 Richard how many of the features have you used ?? Quote Link to post Share on other sites
richardc9052 Posted June 9, 2016 Share Posted June 9, 2016 I used everything apart from the boost control. Never got around to buying a solenoid. Quote Link to post Share on other sites
5T4R7ET N/A Posted June 9, 2016 Share Posted June 9, 2016 They are going very cheap on ebay, looks like a good little setup.Did you get harness from them as well? Quote Link to post Share on other sites
richardc9052 Posted June 10, 2016 Share Posted June 10, 2016 You dont get any wiring. You get the plug and some pins. You have to wire it yourself. They deffo dont sell harnesses Quote Link to post Share on other sites
Glanza1996 Posted June 10, 2016 Share Posted June 10, 2016 Intresting how much are you liking for everything including the map? roughly Quote Link to post Share on other sites
turbo-fever Posted June 10, 2016 Share Posted June 10, 2016 I had mine made by rrr engineering, using all the features aswell as boost control which seems to work fine managed to reduce the lag on my td05 by 800 rpm Quote Link to post Share on other sites
richardc9052 Posted June 10, 2016 Share Posted June 10, 2016 Intresting how much are you liking for everything including the map? roughlyNot sure. I just diy mine and road map. But I only mess around with turbo 4efes. I see the point in fte dontfteess I went forged. Then I would pay to get it all done on rr. Quote Link to post Share on other sites
triple j Posted June 10, 2016 Share Posted June 10, 2016 Are u saying u see no point in putting this ECU on an 4efte unless your forged, why bother boosting a 4efe. Quote Link to post Share on other sites
richardc9052 Posted June 11, 2016 Share Posted June 11, 2016 Sorry no my phone has a mind of its own. I meant I don't see the point in going 4efte unless forged. So unless I go forged I won't be doing any rr map time so I don't know what it costs Quote Link to post Share on other sites
triple j Posted June 11, 2016 Share Posted June 11, 2016 I understand, there is a lad here beside me he has a fresh dyno installed he does diesel mapping, we can get dyno time there for a small fee, if your interested let me no I can send u on his number. Quote Link to post Share on other sites
Ollieh17 Posted June 13, 2016 Share Posted June 13, 2016 Any idea if the det3 will work on a 3pot richard? Quote Link to post Share on other sites
richardc9052 Posted June 13, 2016 Share Posted June 13, 2016 Cant see why not. You would have to run it batch on 2 cylinders as theres onnly 2 injector outputs Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.