motorsport-electronics Posted November 23, 2016 Share Posted November 23, 2016 Guys, Lots of discussion in the other thread about the ECU: http://www.ukstarletowners.com/topic/104082-introduction-from-us-at-me/ This is the Group Buy page. For technical questions please use the other thread above. The group buy is for 5 of each type of ECU, namely, EP91 or EP82. The final product (currently we are up and running on wire-in variants to work everything out, and I can confirm the system is working well, and basemaps are now being produced) will be very much like our popular MX5 PnP ECU as pictured below: It will fit the OEM case, and simply plug and run with all stock sensors, and give full mapping with our free tuning studio, the MEITE, which you can download from our website to have a look through here: https://motorsport-electronics.co.uk/software-manuals/ The final units also the use of the Hi/Lo button for map switching, as well as all the usual features of the ME221 such as closed loop boost control, knock control, launch/ALS, as well as allow you to run COPs and sequential injection (by adding some wires to the loom), though the dizzy and standard setup are supported out the box. We also provide basemaps so you can start and drive the car in an 'OEM' trim, as well as releasing further maps as we tune the cars here (and our other dealers also tune them) so standard mod sets will be supported. Also note the ECU has full in-built auto tune so if you have a wideband you can self tune as well. The Retail price is going to be £645inc VAT, the group buy price is £545inc VAT, including shipping to the UK. For an example of the units ease of fitment and tuning, see the MX5 related videos here:>https://www.youtube.com/watch?v=H2Ycb1cCIXI Delivery will be most likely End of December, or Jan 2017. Once the list is complete we will take payments via our website portal as normal (paypal) and then push the button! Pop your names down guys! EP82:1. Starlet__SR - £100 Deposit Paid (#1396)2.3. 5e colin - £100 Deposit Paid (#1378)4. dawidekd4d - £100 Deposit paid (#1447)5. EP91:1. 2. slo7899 - FULLY PAID 7/02/17 ( #1360) - SHIPPED3. Mike84 - FULLY PAID 21/02/17 (#1364) -SHIPPED4. GordR - £100 Deposit Paid (#1359)5. snails ep91 - FULLY PAID 27/03/17 - SHIPPED6. Karl. -FULL BALANCE PAID 18/12/16 (#1362) - SHIPPED7. LDouble - FULL PRICE PAID (#1392) - SHIPPED8. Maxep - FULLY PAID 22/02/17 (#1370) - SHIPPED9. big guy in ep FULLY PAID 27//03 (#1511) - SHIPPED10. Quote Link to post Share on other sites
Starlet__SR Posted November 23, 2016 Share Posted November 23, 2016 Put me down for an EP82 Manual please. Will we be sending the ecu to yourself for the conversion or are you supplying on an exchange basis? Quote Link to post Share on other sites
motorsport-electronics Posted November 23, 2016 Author Share Posted November 23, 2016 Put me down for an EP82 Manual please. Will we be sending the ecu to yourself for the conversion or are you supplying on an exchange basis? No need to send us the ECU, we send you the PCB, you fit it, watch the MX5 vid to see how easy it is Quote Link to post Share on other sites
TrisK Posted November 23, 2016 Share Posted November 23, 2016 Which ep82 is this for? as the different gens have different pin outs.. Quote Link to post Share on other sites
motorsport-electronics Posted November 23, 2016 Author Share Posted November 23, 2016 This is for the 2 plug, as per this pinout:http://66.media.tumblr.com/85712bb9f553a11c951c533ef1fb17a1/tumblr_mi5avkPbrV1s1o7qho1_1280.gif Quote Link to post Share on other sites
TazzEp91 Posted November 23, 2016 Share Posted November 23, 2016 If its compatable with my 96 ep91 with abs i will also have one mate cheers! Quote Link to post Share on other sites
TrisK Posted November 23, 2016 Share Posted November 23, 2016 This is for the 2 plug, as per this pinout: http://66.media.tumblr.com/85712bb9f553a11c951c533ef1fb17a1/tumblr_mi5avkPbrV1s1o7qho1_1280.gifYou might want to get people to check ECU model numbers, as it changes per year although i think its mainly interior loom pin out changes Quote Link to post Share on other sites
motorsport-electronics Posted November 23, 2016 Author Share Posted November 23, 2016 You might want to get people to check ECU model numbers, as it changes per year although i think its mainly interior loom pin out changes Quote Link to post Share on other sites
motorsport-electronics Posted November 23, 2016 Author Share Posted November 23, 2016 If its compatable with my 96 ep91 with abs i will also have one mate cheers! Quote Link to post Share on other sites
5e colin Posted November 23, 2016 Share Posted November 23, 2016 So is that 545 posted? Quote Link to post Share on other sites
motorsport-electronics Posted November 23, 2016 Author Share Posted November 23, 2016 So is that 545 posted? From the post: "the group buy price is £545inc VAT, including shipping to the UK." So yes Quote Link to post Share on other sites
Socks Posted November 23, 2016 Share Posted November 23, 2016 Does the price get cheaper if you get more then 5? Quote Link to post Share on other sites
slo7899 Posted November 23, 2016 Share Posted November 23, 2016 Put me down for one please ME. EP91 1998 Quote Link to post Share on other sites
motorsport-electronics Posted November 23, 2016 Author Share Posted November 23, 2016 Put me down for one please ME.EP91 1998 Done, thanks Does the price get cheaper if you get more then 5? Sorry, no - bare in mind we rarely run GB for the MX5 so this may be the only chance for maybe a year to save some ££s Quote Link to post Share on other sites
T-dog Posted November 23, 2016 Share Posted November 23, 2016 ^^ I was going to ask the same question as socks lol Quote Link to post Share on other sites
Socks Posted November 23, 2016 Share Posted November 23, 2016 What if we get 10 buyers Quote Link to post Share on other sites
Glanza AuA Posted November 23, 2016 Share Posted November 23, 2016 Hi how will the auto tune work with my wideband ? What are the steps,i would also like price shipped to US adress pleas,thanks in advanced Quote Link to post Share on other sites
5e colin Posted November 23, 2016 Share Posted November 23, 2016 what extras will be needed to operate my acis as this is stand alone ecu it can do this no ?? ( i use a vsvNc that activates "" opens"" at set rpm ) to0 opem my flaps Quote Link to post Share on other sites
Mike84 Posted November 23, 2016 Share Posted November 23, 2016 Put me down for one 1997 ep91Will this be compatible with my honda k20 cop?Cheers Mike Quote Link to post Share on other sites
motorsport-electronics Posted November 24, 2016 Author Share Posted November 24, 2016 Hi how will the auto tune work with my wideband ? What are the steps,i would also like price shipped to US adress pleas,thanks in advanced Quote Link to post Share on other sites
motorsport-electronics Posted November 24, 2016 Author Share Posted November 24, 2016 This is the PC-based autotune (the one where you can see the changes being done in realtime, but requires a laptop connected) >https://www.youtube.com/watch?v=y4-tlqt_8BA&feature=youtu.be Quote Link to post Share on other sites
GordR Posted November 24, 2016 Share Posted November 24, 2016 Put me down for a EP91 unit please Matt Quote Link to post Share on other sites
motorsport-electronics Posted November 24, 2016 Author Share Posted November 24, 2016 Put me down for a EP91 unit please Matt Done, thanks Only one EP91 left now!! Once we hit 5, we will take payments and press go for the EP91 production Quote Link to post Share on other sites
motorsport-electronics Posted November 24, 2016 Author Share Posted November 24, 2016 Hi how will the auto tune work with my wideband ? What are the steps,i would also like price shipped to US adress pleas,thanks in advanced Forgot to say, US shipping is £35. Quote Link to post Share on other sites
TazzEp91 Posted November 24, 2016 Share Posted November 24, 2016 How do i find out the pin outs? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.