Tom Selby Posted June 6, 2017 Share Posted June 6, 2017 Hi guys starting this a bit late but, Picked up my 98 Glanza V in Feb 17 after always wanting one from when i was little, very clean inside and out. Was imported around July 15 on 122631 km, was also undersealed when imported Spec when i bought the car:Japspeed exhaust systemDecatToyosport FMIC with short route pipeHKS adjustable actuatorNGK HT leadsGReddyTurbo timerLenso RS5 wheels Quote Link to post Share on other sites
Tom Selby Posted June 6, 2017 Author Share Posted June 6, 2017 Decided to change the plates and had a smaller one made for the front Quote Link to post Share on other sites
Tom Selby Posted June 6, 2017 Author Share Posted June 6, 2017 Also decided to go for a boost gauge and fitted on the dash until i got my pillar pod and other gauges Quote Link to post Share on other sites
Tom Selby Posted June 6, 2017 Author Share Posted June 6, 2017 I realised fuel cut was horrible and wanted more power so spoke to mike at tuning developments and booked the car in there for EMamage Blue, manifold, fuel pump, electronic boost controller and a few other little bits and bobsAlso got them to fit my 3 gauge pillar pod with boost gauge i already had and oil pressure and temperature gaugesFound out it had bit of a miss fire so also had ignition overhaul kit Ran 187.4bhp 180ftlb @1bar Quote Link to post Share on other sites
Tom Selby Posted June 6, 2017 Author Share Posted June 6, 2017 (edited) Decided i wasnt a fan of the black carbon effect TRD bonnet scoop due to fading so bought a white one off starletezy on here and looks much better imo Edited September 13, 2017 by Tom Selby Quote Link to post Share on other sites
jiggaman_16 Posted June 9, 2017 Share Posted June 9, 2017 Nice. Keep the mods coming. Quote Link to post Share on other sites
Tom Selby Posted July 1, 2017 Author Share Posted July 1, 2017 (edited) Had a few deliveries come the other week and bits have now been fitted,Decided to go for the competition stage 2 clutch and ultra light fly wheel after the stock clutch was slipping a little, feels so much better now Edited July 1, 2017 by Tom Selby Quote Link to post Share on other sites
Tom Selby Posted July 1, 2017 Author Share Posted July 1, 2017 Rad hoses finally decided to come from roose motorsport too and finally got around to fitting the TRD gear gaitor, looks so much better imo ! Quote Link to post Share on other sites
Tom Selby Posted August 19, 2017 Author Share Posted August 19, 2017 After a round trip that took 6 1/2 hours, glad to be back and fitted the new integra dc2 type r seats Deffinately worth the trip and made such a difference over stock seats Quote Link to post Share on other sites
00joeindastarb0 Posted August 19, 2017 Share Posted August 19, 2017 Smart looking Glanza Quote Link to post Share on other sites
Georgehburroww Posted August 27, 2017 Share Posted August 27, 2017 (edited) The shiny cam cover looks mint with the white mate, do you sit any lower in those seats? Edited August 27, 2017 by Georgehburroww Quote Link to post Share on other sites
jiggaman_16 Posted August 28, 2017 Share Posted August 28, 2017 I realised fuel cut was horrible and wanted more power so spoke to mike at tuning developments and booked the car in there for EMamage Blue, manifold, fuel pump, electronic boost controller and a few other little bits and bobsAlso got them to fit my 3 gauge pillar pod with boost gauge i already had and oil pressure and temperature gaugesFound out it had bit of a miss fire so also had ignition overhaul kitRan 187.4bhp 180ftlb @1bar Roughly 75 whp gained from exhaust, intercooler, plug leads & upping the boost? Hmmmm ........ good going. Were those the only power mods done? Quote Link to post Share on other sites
jiggaman_16 Posted August 28, 2017 Share Posted August 28, 2017 Oops. My bad. Overlooked the E-Manage. Quote Link to post Share on other sites
Tomson Posted August 29, 2017 Share Posted August 29, 2017 The shiny cam cover looks mint with the white mate, do you sit any lower in those seats? I was thinking the same , looking really good. Quote Link to post Share on other sites
Ollieh17 Posted August 29, 2017 Share Posted August 29, 2017 Roughly 75 whp gained from exhaust, intercooler, plug leads & upping the boost? Hmmmm ........ good going. Were those the only power mods done? Where did you get 75whp from? That new front plate looks awful imo. First one you had better, minus the GB sign Quote Link to post Share on other sites
jiggaman_16 Posted August 31, 2017 Share Posted August 31, 2017 & manifold also ....... Where did you get 75whp from? That new front plate looks awful imo. First one you had better, minus the GB sign 4efte = 135 hp Considering drive-train losses, i assume the car puts down 110, 115 whp to the wheels. 187.4 - (110, 115) = 72-77 whp. Just sayin .......... but i initially over looked the E-Manage as a power adder when commenting earlier. Quote Link to post Share on other sites
Ollieh17 Posted August 31, 2017 Share Posted August 31, 2017 187.4 is at the fly in UK Quote Link to post Share on other sites
navinpato Posted September 2, 2017 Share Posted September 2, 2017 Also decided to go for a boost gauge and fitted on the dash until i got my pillar pod and other gauges hey does anyone have a tutorial on how to install on a boost gauge Quote Link to post Share on other sites
jiggaman_16 Posted September 9, 2017 Share Posted September 9, 2017 187.4 is at the fly in UK Dont mean to clutter your post ..... but after you dyno tuned the car, that 187.4 hp is at the flywheel & not at the wheel? I though only the engine dyno (as in engine out of car) would give flywheel figures. Please educate me. Quote Link to post Share on other sites
Tom Selby Posted September 10, 2017 Author Share Posted September 10, 2017 The shiny cam cover looks mint with the white mate, do you sit any lower in those seats?Cheers pal and yeh sit lower which is better imo Quote Link to post Share on other sites
Tom Selby Posted September 10, 2017 Author Share Posted September 10, 2017 Where did you get 75whp from? That new front plate looks awful imo. First one you had better, minus the GB signIm gonna get new plates made up again, theyre gel plates too which makes the letters look bigger :/ just gonna go for normal ones i think Dont mean to clutter your post ..... but after you dyno tuned the car, that 187.4 hp is at the flywheel & not at the wheel? I though only the engine dyno (as in engine out of car) would give flywheel figures. Please educate me.Yes thats at the fly Quote Link to post Share on other sites
Tom Selby Posted September 10, 2017 Author Share Posted September 10, 2017 Couple of weeks back had new kyb shocks fitted due to old ones leaking, while everything was off had new top mount and drop links too and also new cv boots as they were both split :/ MOT yesterday also and flew through with no advisories, she did me proud Quote Link to post Share on other sites
daniel_g Posted September 10, 2017 Share Posted September 10, 2017 Liking your CV tool Ohh yeah and the V is smart aswell haha. Quote Link to post Share on other sites
Matty1997 Posted September 10, 2017 Share Posted September 10, 2017 Nice build! Quote Link to post Share on other sites
Tom Selby Posted November 26, 2017 Author Share Posted November 26, 2017 Finally got around to getting some new wheels yesterday after not liking the ones on the car when i bought it Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.