Jump to content
Sign in to follow this  
nikhilkamdar12

Big Spec EP91 Glanza Parts

Recommended Posts

Posted (edited)

Hi guys,

I have a large amount of Glanza parts i'm sure is willing to go to a good home as I need to make space and looking to buy a house of my own!

The full list of parts are listed here with prices an images. I can post any parts at additional cost or collection is welcome from the Borehamwood, Herts area:

Drift Works snap off steering boss (Condition = very good): £50

Haltech IQ3 Display Dash. This goes hand in hand with the Haltech PS1000 ECU or others in their range and uses a single cable for connectivity. Although you can use this digital dash on many other aftermarket ECU as it speaks the same language...CAN. Since this is a Haltech variant of the IQ3 dash and not the regular Racepak IQ3, the difference is that the Haltech one has the built in Haltech CAN protocol, this is what allows the single cable communication. Now for other aftermarket ECUs this can also be used by utilizing the Racepak Universal CAN to V-NET adpator (https://www.tpwengineering.com/products/racepak-external-universal-efi-can-to-vnet-interface-module), what this is doing is converts your aftermarket ECU CAN signal into the Racepak's proprietary CAN signal. Connecting from the Universal CAN to V-NET adaptor you need the the specific ECU cable that plugs into your aftermarket ECU that can be found here: https://www.holley.com/products/data_acquisition/shop_by_motorsport/drag_racing/cables/ecu_interface_cable/parts/280-CA-EFIATBI Once this has been wired you simply configure your ECU to output the Racepak V-NET CAN signal and away you go :) I was running this dash for a very short time before breaking the car as I now have other commitments but its an incredible dash with F1 style LEDs for your rev counter and many other programmable options! Any information from the PS1000 can be sent to the IQ3 dash for displaying the infomation, so no more gauges everywhere, you can have oil pressure, engine temps, exhaust temps, etc.. Also included is the programming cable. £550

Glanza EP91 front set of drive shafts with minimal use Toyota CV boots (condition = Good with minimal use on new inner Toyota CV boots. As you know the majority of aftermarket inner CV boots don't fit at all or fit extremely poorly the only way to go is original, outer CV boots are aftermarket as these fit without any issues. You will need one new CV joint as shown in the picture): £80

ID1000 Injectors - Injector Dynamics (Brand new) These are brand new ID1000cc injectors perfect for bigger BHP 4E's or 5E's. I will also be supplying the top hats that I used on my ASNU injectors that are a direct fit for the 4EFTE. These have an amazing spray pattern and of course will need an standalone ECU to drive these injectors, these are really suited for 350HP and above: £390

Varis replica bumper. Has the white gel coat ready for paint (condition = great): £110

Ultralite 15" alloy wheels with brand new Uniroyal Rain Sport 3's (condition = great): £500

Custom 3" side exit exhaust (condition = good, will need further customisation to fit your turbo housing) : £50

Genuine Tegiwa rear tow hook (condition = good) : £25

OMP drive side race harness (condition = great) : £45

Factory Nearside Glanza EP91 headlight (condition = good, nothing snapped!): £50

Factory 4EFTE Timing belt cover (condition = good, 1 small crack, shown in image) : £20

Factory plastic dial surround (condition = great): £15

Factory interior heater blower (condition = great, fully working): £20

Factory 4EFTE intake manifold (condition = great): £20

Factory 4EFTE alternator (condition = great,  fully working): £25

Offside Glanza EP91 sideskirt end cap (condition = good): £10

Glanza EP91 Set of Front Wishbones (condition = Good, ready to fit completely straight and painted black): £40 - SOLD

Genuine Nardi steering wheel (bought from Drift Works): £200 - SOLD

WEPR Rear Entry Intercooler, IC pipes included in picture (condition = great. This particular WEPR air to air intercooler can flow roughly 450bhp) : £350 - SOLD

Factory set of EP91 Glanza side skirts  (condition = good): £60 - SOLD

Set of EP91 Glanza Foglights (condition = good, nothing snapped, only 1 boot) : £50 - SOLD

Factory 4EFTE ECU (condition = great): £15 - SOLD

Factory Glanza 99' Rear tail lights (condition = great): £60 - SOLD

DC2 Integra Recaro seats with sliding Glanza rails (condition = good, I will give them a proper clean before sold, super comfy!) : £500 - SOLD

Bride Lowmax seat with fixed Glanza mounts (condition = good, I will give them a proper clean before sold, good for track or fast road, has a small hole in the bolster as seen in the images and also a hairline crack in the fibreglass, but negligible:  £180 - SOLD

Glanza EP91 3 guage pillar pod (condition = good, 1 small crack shown in picture) : £30 - SOLD

MeisterR EP91/EP82 Coilovers (condition = great, less than 1000 miles on them. Great upgrade from springs of factory. Have adjustment keys and fully working as expected!) : £450 - SOLD

SPS Demo car GT28 turbo kit, includes, turbo (zero shaft play), stainless steel manifold, water & oil lines and 3" turbo downpipe (condition = good) : £500 - SOLD

Genuine Cruise Bonnet for EP91 Glanza (condition = good, will need re-paining as paint is cracking and new aero-catches.) Included will be the rain guard which I got from IDWorkz and the metal grill which came with the bonnet orginally: £350 - SOLD

Civic triple core radiator, mounting kit & fan (condition = good, no leaks and works as expected) : £100 - SOLD

Japspeed intercooler (condition = good): £30 - SOLD

Full Standalone Haltech PS1000 ECU, Haltech Wideband, 4EFTE entire custom wiring loom. I was running this on my setup extremely successfully. The reason that the ECU, Haltech wideband system and loom is being sold as one, is because the wiring has all been integrated into the engine loom. The loom was custom made from the supplied Haltech loom when I orginally bought the ECU. Included in the price is the custom 4EFTE engine loom, PS1000 ECU, complete Haltech Wideband system with wideband sensor, 36-1 trigger wheel (ready to fit), crank trigger pickup sensor with custom bracket & programming cables, it will all come in the orginal boxes as shown in the pictures. The setup is designed to run with K20 Coil on Plugs with of course full sequential fuelling and ignition, its a massive upgrade over stock and makes driving these little pocket rockets even more fun!. £1600 - SOLD

TRD Short Shift with shifter extension, cables and Genuine Cruise Gear Knob (condition = Great, cables are completely free moving and Cruise gear knob is in brilliant condition!): £180 - SOLD

Rep EP91 Cruise Fibreglass wings (condition = good, will need a respray but the actual structure is perfect and no damage): £120 - SOLD

PowerFlex EP91 Rear Beam Polybushes (Brand new) Good upgrade over the 20+ year old bushes and helps stiffen up the rear!: £50 - SOLD

SuperPro EP91 Front Lower Control Arm Polybushes - Inner Front Bush Kit (Brand new) Also a very good upgrade over the factory bushes and help aid in handling. £30 - SOLD

Please DM me for any shipping quotes or if you would like any parts, hope to see them go to a good project to make an amazing car!

I have quite a few other parts also that I may put up in due time, but currently reserved for a freind, I will update in due course although. 

Thanks

Nikhil

 

20200504-193511.jpg


20200504-193521.jpg


20200504-193525.jpg

20200424-161612.jpg

20200424-161652.jpg

20200424-170235.jpg

20200424-161943.jpg

20200424-161854.jpg

20200424-161841.jpg

20200424-161828.jpg

20200424-161821.jpg

20200424-161808.jpg

20200424-161754.jpg

20200411_141416.jpg

20200411_141439.jpg

20200411_141605.jpg

20200411_141639.jpg

20200411_141650.jpg

20200411_141718.jpg

20200411_141733.jpg

20200411_141828.jpg

20200411_141840.jpg

20200411_141853.jpg

20200411_141934.jpg

20200411_141951.jpg

20200411_142000.jpg

20200411_142027.jpg

20200411_142040.jpg

20200411_142051.jpg

20200411_142125.jpg

20200411_142143.jpg

20200411_142233.jpg

20200411_142240.jpg

20200411_142251.jpg

20200411_142330.jpg

20200411_142341.jpg

20200411_142353.jpg

20200411_142404.jpg

20200411_142412.jpg

20200411_143013.jpg

20200411_143016.jpg

20200411_143031.jpg

20200411_144112.jpg

20200411_144117.jpg

20200411_144121.jpg

20200411_144125.jpg

20200411_144155.jpg

20200411_144843.jpg

20200411_144855.jpg

20200411_145139.jpg

20200411_145143.jpg

20200411_145147.jpg

20200411_145201.jpg

20200412_172046.jpg

20200412_172055.jpg

20200412_172059.jpg

20200412_172108.jpg

20200412_172113.jpg

20200412_172202.jpg

 

 

20200412_183930.jpg

 

 

 

20200412_184017.jpg

20200412_184029.jpg

20200412_184037.jpg

20200412_184045.jpg

 

 

 

Edited by nikhilkamdar12

Share this post


Link to post
Share on other sites
20 minutes ago, Giannis said:

Is your car for breaking?

Hi mate, it is, but have already got rid of the chassis and many other parts, was there anything in particular you were looking after that wasn't listed above? 

Share this post


Link to post
Share on other sites
39 minutes ago, CaroleBaskin91 said:

Where are you based? Interested in the rear lights, will they fit a 97 ? 

Hi mate, updated the listing, rear tail lights and front set of fogs are now sold. 

FYI the Glanza rear lights will fit any EP91 chassis :)

Thanks 

Nikhil

Share this post


Link to post
Share on other sites
On 4/13/2020 at 12:35 PM, nikhilkamdar12 said:

Hi mate, it is, but have already got rid of the chassis and many other parts, was there anything in particular you were looking after that wasn't listed above? 

Ok.....i am looking for roof panel with sunroof

Thanks for reply

Share this post


Link to post
Share on other sites

Unfortunately I got rid of the complete chassis, I would personally check a breakers yard for that.

Thanks

Nikhil

Share this post


Link to post
Share on other sites
2 hours ago, Tombrooker97 said:

Rear bumper available and location? 
07715603614

I'll ping you, still available and in Borehamwood, Hertfordshire. 

Share this post


Link to post
Share on other sites

Would reccomend Nikhil to anyone wanting his parts.

Got some bits today and pleasure to deal with 👍🏼

Share this post


Link to post
Share on other sites
7 minutes ago, CaroleBaskin91 said:

Hi mate, side steps and end cap and ecu all available? 

Hi mate,

Yep Side Skirts, End Cap and ECU are still here, I also have brand new ID Dynamics 1000cc injectors that I still need to list.

Ping me a DM and we'll chat, tried to DM you but won't let me for some reason!

Thanks

Nikhil

Share this post


Link to post
Share on other sites

Hi Nikhil..

I am sending you from Greece and I am very interested in the rear bumper(varis) ... could you send it to Greece ??

Share this post


Link to post
Share on other sites
22 minutes ago, nikos_glan said:

Hi Nikhil..

I am sending you from Greece and I am very interested in the rear bumper(varis) ... could you send it to Greece ??

Hi bud,

Sorry but I will only be shipping in the UK due to the size and awkward shape of the bumper, plus the higher risk of it getting damaged by shipping that far.

Thanks

Nikhil

Share this post


Link to post
Share on other sites
17 hours ago, nikhilkamdar12 said:

Γεια σου,

Λυπούμαστε, αλλά θα μεταφέρω μόνο στο Ηνωμένο Βασίλειο λόγω του μεγέθους και του άβολου σχήματος του προφυλακτήρα, καθώς και ο υψηλότερος κίνδυνος να καταστραφεί από την αποστολή μέχρι τώρα.

Ευχαριστώ

Νιχίλ

thank you..:) 

Share this post


Link to post
Share on other sites

Nikhil,

 

im interested in the injectors 

message me on 07985777903

 

thanks

 

Josh

Share this post


Link to post
Share on other sites
6 hours ago, Jpeverill said:

Nikhil,

 

im interested in the injectors 

message me on 07985777903

 

thanks

 

Josh

Hi mate,

Will ping you now bud.

Thanks

Nikhil

Share this post


Link to post
Share on other sites

Hi guys,

Updated with a few more parts...

TRD Short Shifter with shifter extension, cables and Cruise Gear Knob
Rep Cruise EP91 Fibreglass Wings
Glanza Front Set of Drive Shafts
Glanza Set of Wishbones

Thanks

Nikhil

Share this post


Link to post
Share on other sites
On 5/3/2020 at 7:53 PM, JxckGlanza said:

Received the 3 gauge pillar pod last week , Well packaged 

Ta Nikhil

Thanks bud!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...