leon Posted October 19, 2005 Share Posted October 19, 2005 whers the best place to get stainless system from? thanx Link to post Share on other sites
Guest Enzo Posted October 19, 2005 Share Posted October 19, 2005 could you give us any more information dude?lwhats your budget?and what model ep do you drive man?there are loads of places to get a custom fabed one made up.or you could hget the expensive ones from the like of blitz or hks.. Link to post Share on other sites
leon Posted October 19, 2005 Author Share Posted October 19, 2005 i got an 82turbo and budget of around £350! Link to post Share on other sites
lobotomy Posted October 19, 2005 Share Posted October 19, 2005 Wicked EP Racing do one & never heard anything bad about them. Comes to about £325 -- Can contact him through GTTurbo.com***********************************************************WEPR " Annihalator " Turbo Exhaust --$575USD shippedAvailable for EP82 starlet GT. The kit is a complete 2.5" inch turbo-back stainless steel system. Kits come with a polished stainless piping/straight through muffler with 4 inch round tip. The systems directly bolts on to existing exhaust hangers and are designed for faster spool up and MUCH improved Mid range/Top end. good for 10-13bhp's extra. Some application may need a HKS Fuel Cut Defencer. The exhaust kit comes pre-bunged for the factory O2 sensor*********************************************************** Link to post Share on other sites
leon Posted October 19, 2005 Author Share Posted October 19, 2005 yeh seen that one and looks good, has anyone ever orderd off him? just wonderd delivery time ect as its from the states Link to post Share on other sites
lobotomy Posted October 19, 2005 Share Posted October 19, 2005 He's based in malaysia. And that's the only complaint I've heard from people -- he does take a bit of time to fabricate/send stuff out (but think it's only because he's so busy)There's also a guy Petbeemer on GTTurbo.com who's based in the UK making relatively cheap parts for GT's. He's not been around too long so not too much feedback for him. Link to post Share on other sites
Ep91 Posted October 19, 2005 Share Posted October 19, 2005 Dont supose he can make them for the N/A Ep91?Or does anyone know of anyone that does? Link to post Share on other sites
Nanglebadger Posted October 19, 2005 Share Posted October 19, 2005 Mine was done by Powerflow, lifetime guarntee, did a fab job.Phil. Link to post Share on other sites
SiCaln Posted October 20, 2005 Share Posted October 20, 2005 not that pleased with my powerflow one and you wanna see where they welded it! Link to post Share on other sites
Ep91 Posted October 20, 2005 Share Posted October 20, 2005 By the way you said that.... im guessing we dont wanna see where they welded it Anywhere other than powerflow? Ive only ever heard bad things about them! Link to post Share on other sites
SiCaln Posted October 20, 2005 Share Posted October 20, 2005 With the exception of Nanglebadger lolThey welded it to one of the fixings for the handbrake cables! Link to post Share on other sites
Nanglebadger Posted October 20, 2005 Share Posted October 20, 2005 HHMMMM...thats not cool. The same guy did mine and my dads barchetta, he gets a good rep, i suppose it just depends who the guy is that does it.Phil. Link to post Share on other sites
Guest Enzo Posted October 20, 2005 Share Posted October 20, 2005 graeme aka streetracer had nothing but trouble with his wepre system..ask him and he would be more then happy to tell you about it.apart from that he did say the quality of the workmanship is hi Link to post Share on other sites
SiCaln Posted October 20, 2005 Share Posted October 20, 2005 Here is a picture of the WEPR system, they have also incorporated a flexi-section which was part of the problem before, it was too rigid so occasionally fractured on our roads: Link to post Share on other sites
BlackTarw Posted October 21, 2005 Share Posted October 21, 2005 There's also a guy Petbeemer on GTTurbo.com who's based in the UK making relatively cheap parts for GT's. He's not been around too long so not too much feedback for him.<{POST_SNAPBACK}>Yeah his stuff looks good, there's a few pics on the forum somewhere/ Make sure you get a flexi-joint as stainless steel is more brittle than mild steel. If you're going to get the exhaust manifold (think it's called a header in the States?) off, then invest in exhaust wrap, that'll keep the temperature down in the engine bay. Link to post Share on other sites
leon Posted October 23, 2005 Author Share Posted October 23, 2005 just orderd a wicked ep system! should be here soon! yeh manifold will be next investment when i get paid! Link to post Share on other sites
Robbo Posted October 26, 2005 Share Posted October 26, 2005 he doesn't live in the states or malaysia, he lives in sri-lanka, get it right lads! they are supposed to be good especially with the flexi section, i got mine custom made and the only bad thing about it is the lack of flexi to be honest. Link to post Share on other sites
Bilal Posted October 27, 2005 Share Posted October 27, 2005 HHMMMM...thats not cool. The same guy did mine and my dads barchetta, he gets a good rep, i suppose it just depends who the guy is that does it.Phil.<{POST_SNAPBACK}>powerflow ballymena in n.i have a good reputation alright custom all the way is best petbeemer of gt forum is also good i hear Link to post Share on other sites
Guest Enzo Posted October 27, 2005 Share Posted October 27, 2005 he doesn't live in the states or malaysia, he lives in sri-lanka, get it right lads!what are you on about. he was just making a point stating that manifold is called header in the states..he never mentioned anything about wicked ep being fromt there dude..if i were to pay for pand p would you be interested in my wheels? rob Link to post Share on other sites
BlackTarw Posted October 27, 2005 Share Posted October 27, 2005 I think we got our wires crossed there, Leon mentioned shipping from the States, I read it as shipping to the States...no worries Let us know how you get on with exhaust!Q. am I right in thinking a FCD might be needed? Link to post Share on other sites
SiCaln Posted October 27, 2005 Share Posted October 27, 2005 Yes you are right, people have hit fuel cut with just the exhaust alone! Link to post Share on other sites
leon Posted October 28, 2005 Author Share Posted October 28, 2005 yeh i got myself cofused as he said us dollars! any way shuddnt be long and i al ready have a fcd Link to post Share on other sites
BlackTarw Posted October 28, 2005 Share Posted October 28, 2005 No worries then!by the way it's 5.30 on a Friday, woo! Link to post Share on other sites
gaz Posted November 3, 2005 Share Posted November 3, 2005 i wanna get a full system at some point with a custom tip, angled up and sideways a bit. Link to post Share on other sites
starletboy Posted November 3, 2005 Share Posted November 3, 2005 i wanna get a full system at some point with a custom tip, angled up and sideways a bit.<{POST_SNAPBACK}>i have just had my exhaust done a full system with a tenzo r rear box and had it kicked up and sideways like the supras have looks really good will put up some pics when i can be arsed!!! Link to post Share on other sites
Recommended Posts