lew777 Posted April 16, 2013 Share Posted April 16, 2013 looks good mate will have to have a meet up and have a nosey around Quote Link to post Share on other sites
Socks Posted April 16, 2013 Share Posted April 16, 2013 Glad to see you have her back Rob! Quote Link to post Share on other sites
Glanza Mac Posted April 16, 2013 Author Share Posted April 16, 2013 We sure do lew, I need to have another nosey at your baby Cheers socks we will all have to have another Lincs meet when we all have our cars Rob. Quote Link to post Share on other sites
Chand Posted April 16, 2013 Share Posted April 16, 2013 ^^ here here Finally get to show mine off ;) Quote Link to post Share on other sites
Glanza Mac Posted April 17, 2013 Author Share Posted April 17, 2013 Indeed ;)Rob. Quote Link to post Share on other sites
Glanza Mac Posted April 19, 2013 Author Share Posted April 19, 2013 Few pics of the engine bay in daylight Rob Barnard Custom Inlet The angle is unreal CARBON Front end Quote Link to post Share on other sites
Chand Posted April 19, 2013 Share Posted April 19, 2013 Looks sweet mate can't wait too see graph Quote Link to post Share on other sites
Glanza Mac Posted April 20, 2013 Author Share Posted April 20, 2013 Same nearly half way there to running inRob. Quote Link to post Share on other sites
ro55ifumi Posted April 20, 2013 Share Posted April 20, 2013 Good to see Simon's inlet being put to good use and looking tidy mate John Quote Link to post Share on other sites
Glanza Mac Posted April 20, 2013 Author Share Posted April 20, 2013 Thanks John, I hope to make simular power to Simon too.. If not more Rob. Quote Link to post Share on other sites
Glanza Mac Posted April 28, 2013 Author Share Posted April 28, 2013 Just A Quick Mock Up Of My Current Spec.. A Few Items Im Yet To Fit.. *******Running Gear Tuning Developments Stage 3 4EFTE Rebuilt Engine Specs: *Wossner 74.5mm Low Compression Piston Kit with Rings and Pins *Scat 4EFTE Forged Conrod Kit with ARP Rod Bolts *Athena 1.2mm Uprated Metal Headgasket *ARP 2000 Uprated Headbolt Kit inc New Washers *ARP 2000 Uprated Main Stud Kit *Genuine Toyota Full Gasket Kit *Genuine Toyota Oil Pump Kit *OEM Water Pump Kit *OEM Cambelt Kit inc Idler & Tensioner *ACL Main Bearing Kit *ACL Big End Bearing Kit *ACL Thrust Washer Kit *Fully Machined and Polished 4EFTE Bottom End *Fully Stripped and Cleaned 4EFTE Cylinder Head Rebuilt to Custom Tuning Developments Race Spec *Port And Polished Head HKS F-Con Pro ECU Rob Barnard Custom 4EFTE Inlet WEPR TD04/05 Manifold WEPR DownPipe Tial External Wastegate Greddy Dump Valve Tuning Developments Billet Hybrid Turbo Tuning Developments Water lines Tuning Developments Low temp thermostat Tuning Developments Orange Throttle Pulley Tuning Developments Ignition Overhaul *Dizzy Cap *Rotor Arm *Heat Range 7 Spark Plugs *Magnecor HT Leads Denso 550cc Injectors CJ Performance Large Gold Fuel Rail Oem Lsd Gearbox Jam Racing Flywheel Walbro 255LPH Fuel Pump Sard Fuel Pressure Regulator JD Tuning Torque Damper Powerflex Engine Mounts Powerflex Exhaust Mounts Custom Clutch Fluid Reserovior HDI Intercooler Orange Roose MotorSport Hoses Tegiwa Civic Radiator T-Bolt Clamps Polished Stainless Steel Alterntor Pulley Polished Stainless Steel P/S Pulley *********Engine Bay Carbon Fibre Oil Catch Tank Carbon Fibre Battery Cover Carbon Fibre Radiator Stay Roose Motorsport Silicone Hoses Braided Oil Catch Tank Hose Brown With Orange Metal Flake Rocker Cover Anodised Orange Toyota Battery Stay Tegiwa Anodised Orange Washers Tegiwa Anodised Orange Rocker Cover Nuts Blitz/Tuning Developments Reservoir Covers *********Interior Mitsubishi Evo 4 Recaro Front Seats Nardi Steering Wheel Apexi AVCR Boost Controller Blitz Turbo Timer Carbon Fibre MC CHU Centre Console Carbon Fibre MC Chu Dial Surround Carbon Fibre Blitz Boost Gauge Carbon Fibre Blitz Pressure Gauge Carbon Fibre Blitz Temperature Gauge Carbon Fibre Varis Gearknob Oem Arm Rest Luxury Black&Red Stitched Leather Gaitors Luxury Black&Red Stitched Mats Stripped Out Rear **********Exterior Varis Front Bumper Livesport Side Skirts Carbon Fibre Varis Bonnet Carbon Fibre Top Spoiler Carbon Fibre Ducktail Spoiler Carbon Fibre Rear Splitter Carbon Fibre Glanza V Badge Oem Rear Bumper 16" Black RS5 Lenso Alloys/15" Sparco Crimson Alloys 98 Spec Kouki Rear Lights H4 6k Hids Team Heko Wind Deflectors Aero Wipers 98 Spec Fog Lights *********Chassis D2 Coilovers EBC Grooved & Dimpled Discs EBC Yellow Stuff Pads Carbon Fibre Cusco Front Strut Brace Carbon Fibre Cusco Rear Strut Brace Toyo T1R Tyres **********Other Aftermarket Alarm/Central locking Remote Start Rob. Quote Link to post Share on other sites
_shaun_ Posted April 29, 2013 Share Posted April 29, 2013 beast of a spec list will be a true monster when mapped! did u get the cj performance rail to fit? Quote Link to post Share on other sites
Glanza Mac Posted April 29, 2013 Author Share Posted April 29, 2013 Thanks dude, can't wait for mapping, just over 100 miles to go then I'm run in, I'm yet to fit the rail but a mate has fitted one, some of my spec is based on items in possession ready to be fitted Rob. Quote Link to post Share on other sites
_shaun_ Posted April 29, 2013 Share Posted April 29, 2013 ahh didnt no anyone managed to get them to fit.. 100miles! why are u sitting on the forum get out on the road. my plan for my engine was get it build and just take my bank card and start driving lol stop at some sexy members houses to drop the oil and carry on again and bang it out in like 2 days Quote Link to post Share on other sites
Glanza Mac Posted April 29, 2013 Author Share Posted April 29, 2013 Haha, I thought the same but money was tight when I received my bill , I'll do it by the end of the week Rob. Quote Link to post Share on other sites
_shaun_ Posted April 29, 2013 Share Posted April 29, 2013 ahh thats true i was gonna build me own but since its going on a standalone would mean needing to trailer it up to the mappers get it mapped and have them change the oil then go run it in and take it right back again so grabbed a pre run in engine Quote Link to post Share on other sites
Glanza Mac Posted April 29, 2013 Author Share Posted April 29, 2013 What management you going for? , not a,bad way to do it.. A bit cheaper than getting a company to build one from scratch Rob. Quote Link to post Share on other sites
_shaun_ Posted April 29, 2013 Share Posted April 29, 2013 picked up a dta s60 pro same one zisco use on there demo gt so should get the job done lol.aye i stay in the middle of nowhere so just the trip up to get it mapped would cost like a fair chunk in petrol nevermind time Quote Link to post Share on other sites
Glanza Mac Posted April 29, 2013 Author Share Posted April 29, 2013 Yeahh true haha , whos going to map it for you? Rob. Quote Link to post Share on other sites
_shaun_ Posted April 29, 2013 Share Posted April 29, 2013 same lads that mapped ryan's white v. performance hq in edinburgh was gonna try go back to gi-motorsport as they mapped my emu but they do road maps and i would have the car registered when its mapped incase theres any issues with it Quote Link to post Share on other sites
Glanza Mac Posted April 29, 2013 Author Share Posted April 29, 2013 Ahh I see, what power you hoping for?Rob. Quote Link to post Share on other sites
_shaun_ Posted April 29, 2013 Share Posted April 29, 2013 running a gt2876r so just gonna wind up the boost and see were i land 350 would be nice its for a 4paw tho so ill get more losses with the drivechain Quote Link to post Share on other sites
Glanza Mac Posted April 29, 2013 Author Share Posted April 29, 2013 Will be silly quick on a good launch tho , I'm hoping for 320bhp but 300 would keep me smiling Rob. Quote Link to post Share on other sites
_shaun_ Posted April 29, 2013 Share Posted April 29, 2013 Aye number wise am not bothered really would be nice to have but long as its fun to drive who cares lol. All twisty country roads around me so 4paw should be in its element Quote Link to post Share on other sites
Glanza Mac Posted May 15, 2013 Author Share Posted May 15, 2013 Nice little update Got a Race Spec Rocker from Got.Boost today and its awesome.. colour not my taste but quality is brill http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0608.jpg.html'> AN 8 Thread http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0609.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0611.jpg.html'> AN 8 Fittings http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0612.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0613.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0614.jpg.html'> Also covered my door cards the other week as the old granny style design didnt go with my interior Before http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0582.jpg.html'> After http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0583.jpg.html'> Black Faux suede http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0585.jpg.html'> A Few Random Pcitures http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0587.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0586.jpg.html'> A Few From My Weekend At Santa Pod http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0594.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0595.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0601.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0603.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0604.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0605.jpg.html'> http://s916.photobucket.com/user/robmac8/media/White%20Glanza%20V/DSC_0606.jpg.html'> Thats all Rob. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.