loz180691 Posted July 9, 2013 Share Posted July 9, 2013 I've just got my brake cylinder stopper cannot work out how it goes together and pictures of them fitted would be a massive help cheers Quote Link to post Share on other sites
Chris Green Posted July 9, 2013 Share Posted July 9, 2013 I did the same haha, spent about an hour trying to work it out and gave up! Quote Link to post Share on other sites
morgey Posted July 9, 2013 Share Posted July 9, 2013 (edited) . Edited July 9, 2013 by morgey Quote Link to post Share on other sites
Mr. Chem Posted July 9, 2013 Share Posted July 9, 2013 The tegiwa is more of a pain to fit than they would lead you to believe, but it can be done. I found this guide on toyota gtt useful http://www.toyotagtturbo.com/forums/showwiki.php?title=Fitting+Cusco+Brake+Master+Cylinder+Stopper+BMCS but its is for a cusco. Here are some pictures of my own set up: To get this to work properly, you need to modify the tegiwa slightly. Firstly the tetris shaped part needs to be drilled out to accomate the bolt they supply. Also, the slot on the other end of this piece needs to be enlarged slightly. Now this tetris piece fits onto the engine mount bolt. You will need two m10 bolts and it it like this: The other piece goes to the bracket supporting the power steering line like so: Where the two parts me, they look like this: Hopefully you will find this useful. I always find pictures help. Quote Link to post Share on other sites
akyakapotter Posted July 9, 2013 Share Posted July 9, 2013 Mine is still in my tool box need to shorten the bolt that goes through the engine mount as its to long on mine Quote Link to post Share on other sites
mikey4410 Posted July 9, 2013 Share Posted July 9, 2013 have seen these before,are they well worth buying or not ? Quote Link to post Share on other sites
loz180691 Posted July 9, 2013 Author Share Posted July 9, 2013 Thanks for taking the time showing me Piccys think I've worked it out now Quote Link to post Share on other sites
loz180691 Posted July 9, 2013 Author Share Posted July 9, 2013 Mine has adaptor that bolts to the existing mount bolt so that goes on bish bash bosh and straight running from there Quote Link to post Share on other sites
akyakapotter Posted July 9, 2013 Share Posted July 9, 2013 ^^^ good luck lol Quote Link to post Share on other sites
loz180691 Posted July 9, 2013 Author Share Posted July 9, 2013 Lol should go to plan Quote Link to post Share on other sites
loz180691 Posted July 11, 2013 Author Share Posted July 11, 2013 Previously I said ye it will be easy..... I was wrong I would not recommend one of these kits to my worst enemy did not fit wasn't even close had to drill holes shorten bolts bend brackets and still no joy. I've messages tegiwa explaining my frustration and I'm just waiting to hear back they state in there description it's for a glanza turbo ep91 I think not lol nvm £30 down the drain Quote Link to post Share on other sites
russ78 Posted July 11, 2013 Share Posted July 11, 2013 this might help you bud http://www.toyotagtturbo.com/forums/showthread.php?96326-Tegiwa-brake-stopper Quote Link to post Share on other sites
akyakapotter Posted July 11, 2013 Share Posted July 11, 2013 Previously I said ye it will be easy..... I was wrong I would not recommend one of these kits to my worst enemy did not fit wasn't even close had to drill holes shorten bolts bend brackets and still no joy. I've messages tegiwa explaining my frustration and I'm just waiting to hear back they state in there description it's for a glanza turbo ep91 I think not lol nvm £30 down the drainLol this is why mine is sat In my toolbox it will fit with the engine mount bolt shortened on some washers to pack it out Quote Link to post Share on other sites
russ78 Posted July 11, 2013 Share Posted July 11, 2013 (edited) hope my cusco brake stopper fits better Edited July 11, 2013 by russ78 Quote Link to post Share on other sites
loz180691 Posted July 15, 2013 Author Share Posted July 15, 2013 No guide will help now chucked it in the bin :@ thanks for the help tho guys Quote Link to post Share on other sites
akyakapotter Posted July 15, 2013 Share Posted July 15, 2013 ^^^ lol Quote Link to post Share on other sites
JayJ Posted July 15, 2013 Share Posted July 15, 2013 Haha, these fit like a dream, just some DIY needed! ;-) Quote Link to post Share on other sites
DennisV Posted December 5, 2013 Share Posted December 5, 2013 Got a tegiwa and I named it. It' s called BITCH! Its on now but i had to work with blood sweat and tears. You need the right tools to do it. Even my engine mountbolt is replaced by a shorter one. But if it's in place leave it and don't touch it any more!!!! But it helps yes Quote Link to post Share on other sites
littlegreenmonster Posted January 2, 2014 Share Posted January 2, 2014 What exactally do they do ?? Quote Link to post Share on other sites
akyakapotter Posted January 2, 2014 Share Posted January 2, 2014 stop brake cylinder flexing under hard braking making the pedal feel better apparently I never fitted mine its still in my tool box lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.