iamlegend Posted July 15, 2013 Share Posted July 15, 2013 (edited) Need a rear fog light wired in ASAPAny one fancy been a pure ultimate beast wars and wiring me one in to the glanzaYes ok hahaha I can't wire a thing hahahahahahah hahahah Edited July 17, 2013 by iamlegend Quote Link to post Share on other sites
H_D Posted July 15, 2013 Share Posted July 15, 2013 Just hard wire it to the battery with a fuse and fit a little switch near the dash area. Once you have your MOT certifcate take it off and put it away for next year lol. Quote Link to post Share on other sites
iamlegend Posted July 15, 2013 Author Share Posted July 15, 2013 Well I have the switch installed and the wire left open as I cut the one that was already on as it was ugly and did t work so... Any ideas Quote Link to post Share on other sites
_shaun_ Posted July 15, 2013 Share Posted July 15, 2013 Get a good battery powered bike light. And stick it to the back bumper when they ask where the switch for it is show them the little button on the light. Noone specified were the switch needs to be so I done that for my old crx Quote Link to post Share on other sites
daniel_g Posted July 15, 2013 Share Posted July 15, 2013 Get the kit of ebay, import fog kit, its so easy to wire in mate and has instructions if youre not sure Quote Link to post Share on other sites
iamlegend Posted July 15, 2013 Author Share Posted July 15, 2013 Show me a link for the light mate? So eh it will switch on threw the button or you mean switch the light on the light it self ? Quote Link to post Share on other sites
daniel_g Posted July 15, 2013 Share Posted July 15, 2013 The MOT rules are pretty strict tbh, best to just do it once and do it right. The switch has to illuminate and only when the dipped beam is on etc. http://item.mobileweb.ebay.co.uk/viewitem?itemId=220538022658 Quote Link to post Share on other sites
iamlegend Posted July 15, 2013 Author Share Posted July 15, 2013 I have the switch the wires and the crimps so was thinking how to wire it into my rear lights tbh Quote Link to post Share on other sites
scottyb Posted July 15, 2013 Share Posted July 15, 2013 Ive got mine wired into one of the lights next to the numberplate, left it clear with a red led bulb. Would never know its there when its turned off Quote Link to post Share on other sites
iamlegend Posted July 15, 2013 Author Share Posted July 15, 2013 (edited) Yes my mate said wire it in to the reverse light jobs a good unThat will be simple Edited July 15, 2013 by iamlegend Quote Link to post Share on other sites
loguey Posted July 15, 2013 Share Posted July 15, 2013 Pretty sure its gotta be on the drivers side too dont kno how it affects it if you were to wire it into the reverse lights Quote Link to post Share on other sites
iamlegend Posted July 15, 2013 Author Share Posted July 15, 2013 Yep drivers side mate Quote Link to post Share on other sites
A L 3 X Posted July 15, 2013 Share Posted July 15, 2013 I've put twin filament bulbs in the lower tail light and wired it to the bright one of that Quote Link to post Share on other sites
Critic Posted July 16, 2013 Share Posted July 16, 2013 I had one on my car until I went over a dead animal (animal was in the middle of my path of the car) and the animal hit the light breaking/ taken it off. :/ Quote Link to post Share on other sites
Patches Posted July 16, 2013 Share Posted July 16, 2013 I've put twin filament bulbs in the lower tail light and wired it to the bright one of that Smart man. Did u have to get a new bulb holder? Quote Link to post Share on other sites
A L 3 X Posted July 16, 2013 Share Posted July 16, 2013 I think I used a bulb holder from a spare taillight loom I had, another top one for the brake light, only Took about half hour to make the looms and fit it all Quote Link to post Share on other sites
iamlegend Posted July 17, 2013 Author Share Posted July 17, 2013 (edited) arggghhh what a epic fail today so I did this... was thinking yey going to work DID IT FUCK!!! WHY!! help meeeeeeeeee pleasethere was me thinking i was a reet wizz kid n all snifflesnever goes fucking simple... pulled back the wire so its bare wire then I have crimped it together like thisthe switchlights up http://s287.photobucket.com/user/ashleightroup1988/media/photo35_zps096f6a92.jpg.html'> then crimped these...then put the earth on the bare metal here behind that furry sticky pad you see..... Edited July 17, 2013 by iamlegend Quote Link to post Share on other sites
daniel_g Posted July 17, 2013 Share Posted July 17, 2013 Try it with the lights on.Got a good earth ? Quote Link to post Share on other sites
iamlegend Posted July 17, 2013 Author Share Posted July 17, 2013 Try it with the lights on.Got a good earth ? put the side lights on.. yes the earth is solid and secure on bare metal Quote Link to post Share on other sites
daniel_g Posted July 17, 2013 Share Posted July 17, 2013 Needs to be wired in to the dipped for MOT though.But i wired into the plate lights for easyness haha. Quote Link to post Share on other sites
iamlegend Posted July 17, 2013 Author Share Posted July 17, 2013 (edited) oh so if i put full beam on? i never wired the switch in like hmmmm found this where the switch is wired tohttp://s287.photobucket.com/user/ashleightroup1988/media/photo36_zps47b883a9.jpg.html'> Edited July 17, 2013 by iamlegend Quote Link to post Share on other sites
daniel_g Posted July 17, 2013 Share Posted July 17, 2013 No, wire it into the headlights, not full beam.You need a switch with a tell tale sign, ie, illumimating. Quote Link to post Share on other sites
iamlegend Posted July 17, 2013 Author Share Posted July 17, 2013 Why Quote Link to post Share on other sites
daniel_g Posted July 17, 2013 Share Posted July 17, 2013 Or else VOSA will bum you, dry. Quote Link to post Share on other sites
iamlegend Posted July 17, 2013 Author Share Posted July 17, 2013 that switch does light up Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.