morgan Posted September 19, 2015 Share Posted September 19, 2015 Hi everyone, Dose anyone have a fitting guide on putting in the ID-workz half size radiator kit? It didn't come with instructions and I have no clue where to put the brackets, and if anything needs cutting or drilling and how to fit the fan to the radiator itself (Sorry if this is I. The wrong section but didn't know where else to put it) Thanks Quote Link to post Share on other sites
Whitenoize Posted September 19, 2015 Share Posted September 19, 2015 You just remove your old rad brackets dude and replace with the new ones use the same holes etc on top and it will give you a good idea what ones to use for the bottom bracket..no drilling etc it's very very easy Quote Link to post Share on other sites
morgan Posted September 19, 2015 Author Share Posted September 19, 2015 The holes do not line up with the brackets supplied, do you have a picture at all mate ? There the old radiator sat there is a bracket at the bottom the seems to hit the radiator aswell Quote Link to post Share on other sites
Whitenoize Posted September 19, 2015 Share Posted September 19, 2015 You can take the old rad brackets at the bottom off dude I dont have any pictures unfortunately mate sorry Quote Link to post Share on other sites
morgan Posted September 19, 2015 Author Share Posted September 19, 2015 Thanks mate I will have a look tomorrow Quote Link to post Share on other sites
Uzzy@ID-Workz Posted September 20, 2015 Share Posted September 20, 2015 PM'd Quote Link to post Share on other sites
morgan Posted October 4, 2015 Author Share Posted October 4, 2015 Anyone have any pictures of this at all as the brackets I have do not line up with any holes and it looks like I have to cut the old bottom radiator mount off aswell to get the radiator sitting correctly Quote Link to post Share on other sites
jellybaby Posted October 10, 2015 Share Posted October 10, 2015 Yer u have to cut the oldBottom rad mounts off also u use the two bumper bolts which is on the cross member Quote Link to post Share on other sites
Malcolm GT Posted October 17, 2015 Share Posted October 17, 2015 Trying to do this now, anyone got pics? Quote Link to post Share on other sites
dan106 Posted October 17, 2015 Share Posted October 17, 2015 You have to cut off the old rad mount, I drilled two holes in the cross member to mount mine to Quote Link to post Share on other sites
Malcolm GT Posted October 18, 2015 Share Posted October 18, 2015 Cheers Dan. I have cut the old bracket out and will be drilling and finding bolts to hold the bracket. My rad hoses seems way to tight over the new rad. anyone else find this? It was like it was going to break! Quote Link to post Share on other sites
dan106 Posted October 19, 2015 Share Posted October 19, 2015 Yeah they're a bit of a bitch to get on but at least you know they're not coming off in a hurry Quote Link to post Share on other sites
jezza Posted October 19, 2015 Share Posted October 19, 2015 This should help you http://www.ukstarletowners.com/topic/35302-jd-tuning-ep82ep91-civic-rad-mounting-kit/ Quote Link to post Share on other sites
Fozzie Posted October 19, 2015 Share Posted October 19, 2015 Cheers Dan.I have cut the old bracket out and will be drilling and finding bolts to hold the bracket.My rad hoses seems way to tight over the new rad. anyone else find this? It was like it was going to break!I think some of the civic radiators have 32mm inlet/outlets on them, while the standard Starlet radiator hose has a 28mm I/D, so they can be very tight to fit on. Quote Link to post Share on other sites
morgan Posted October 21, 2015 Author Share Posted October 21, 2015 Anyone have pictures of fitting the fan to the radiator. The kit I have got comes with:4x plastic rod's4x retaining clips for the rods8x foam pads 4x springsHaving problems putting the springs on, don't know where they go ect, the place that I think they go they stick out at an odd angle Thanks Quote Link to post Share on other sites
Uzzy@ID-Workz Posted October 21, 2015 Share Posted October 21, 2015 Pm me your email address mate. I will get some pictures sent over tomorrow Quote Link to post Share on other sites
morgan Posted October 22, 2015 Author Share Posted October 22, 2015 (edited) Thanks mate I will send it over now Edited October 22, 2015 by morgan Quote Link to post Share on other sites
Malcolm GT Posted October 23, 2015 Share Posted October 23, 2015 Any chance I can get one uzzy? Quote Link to post Share on other sites
Uzzy@ID-Workz Posted October 23, 2015 Share Posted October 23, 2015 Yeah mate. Pm me your email and il send it on Monday when I'm back at work Quote Link to post Share on other sites
gorganl2000 Posted February 2, 2018 Share Posted February 2, 2018 (edited) hi, by any chance does anyone have pictures of this mounting/bracket kit fitted up? like the others, i bought it, but no instructions came with it and before i go cutting and drilling stuff, it would be nice to have some kind of guide or pictures to go by. i'm sure its not rocket science, but i want the installation to be as tidy as possible and if possible, some pictures of the radiator hoses connecting to the radiator would be nice as well any help appreciated PS - i already contacted the seller, but no response....i also looked through a few members builds, but no real help there either as that's like searching for a needle in a hay stack Edited February 2, 2018 by gorganl2000 Quote Link to post Share on other sites
akyakapotter Posted February 2, 2018 Share Posted February 2, 2018 here you go dude. Cheers nick Quote Link to post Share on other sites
gorganl2000 Posted February 2, 2018 Share Posted February 2, 2018 thank you very much sir Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.