Bean Posted December 15, 2015 Share Posted December 15, 2015 im just looking at these 6 speed boxes as they came with lsd in them from the factory. The spec of them is below. C65/C65MGear ratios for this transmission. 1st 2nd 3rd 4th 5th 6th Reverse Final 3.166 1.904 1.392 1.031 0.815 0.725 3.250 4.312Differential Options:C65-01A: Open DifferentialC65-01B: Helical Limited Slip Differential (LSD)Applications:2003–2007 Toyota MR2 Spyder (JP) (manual mid-engine application)2003–2007 Toyota MR2 Spyder (US/UK/JP) (SMT mid-engine application)C66/C66MGear ratios for this transmission. 1st 2nd 3rd 4th 5th 6th Reverse Final 3.166 1.904 1.310 0.969 0.815 0.725 3.250 3.941Applications:2003–2005 Toyota MR2 Spyder with Helical LSD (Europe) (manual mid-engine application)Any idea if they will fit our 4e engines if the belhousing and shifter linkages are swapped? Quote Link to post Share on other sites
Phil Posted December 16, 2015 Share Posted December 16, 2015 From a quick look at Mrs and Elise exige boxes the linkages comes out of the front side of the gearbox rather than the rearSo custom linkage maybe requiredPhil Quote Link to post Share on other sites
TrisK Posted December 16, 2015 Share Posted December 16, 2015 My mate had one on his Tsport. Atrocious ratios on that. dropped out of lift every chance, i would imagine we would have similar boost issues Quote Link to post Share on other sites
Phil Posted December 16, 2015 Share Posted December 16, 2015 Which box Trisk ?Phil Quote Link to post Share on other sites
Bean Posted December 16, 2015 Author Share Posted December 16, 2015 I was hoping done fwd linkages could be fitted to it. Quote Link to post Share on other sites
morgey Posted December 16, 2015 Share Posted December 16, 2015 Another option is a guy on facebook sells corolla tsport gearboxes with the lsd and 6th gear from these. Better 1-5th ratios but a long 6th for cruising and the linkages would be the correct way round Quote Link to post Share on other sites
Socks Posted December 16, 2015 Share Posted December 16, 2015 Shit for strength. Shredd gears at the same power levels as our boxes. Quote Link to post Share on other sites
Mike@TD.co.uk Posted December 16, 2015 Share Posted December 16, 2015 Shit for strength. Shredd gears at the same power levels as our boxes. This. Also physical size is an issue with the chassis leg, along with the shafts are too small for the diff. Quote Link to post Share on other sites
pockrockgtti Posted December 16, 2015 Share Posted December 16, 2015 Drive shaft splines are different aswell. If you really want a 6sp box with an lsd you would be better of getting a c160 from a levin 20v, You would still then need to swap the bellhousings over. Quote Link to post Share on other sites
Bean Posted December 16, 2015 Author Share Posted December 16, 2015 Thanks for the replies guys. I wouldn't be running big power only ct9 hybrid on my 4e or the 5e i have. So shredding gears shouldn't be any issue for me. It sounds like it's a no go though for the size of them and the shafts not fitting. Cheers Quote Link to post Share on other sites
TrisK Posted December 16, 2015 Share Posted December 16, 2015 Which box Trisk ?PhilC66 IIRC phil Quote Link to post Share on other sites
5e colin Posted December 16, 2015 Share Posted December 16, 2015 (edited) I was hoping done fwd linkages could be fitted to it. ofcoure it can be swapped over but the 2002 mr2 i was working on last week hase the levers in same spot as starlet so no need for swapping ha ha Edited December 16, 2015 by 5e colin Quote Link to post Share on other sites
gorganl2000 Posted December 17, 2015 Share Posted December 17, 2015 Thanks for the replies guys. I wouldn't be running big power only ct9 hybrid on my 4e or the 5e i have. So shredding gears shouldn't be any issue for me.It sounds like it's a no go though for the size of them and the shafts not fitting.Cheersbean, my advice is dont put a ct9 or ct9 hybrid on a 5e....not a good set up Quote Link to post Share on other sites
Phil Posted December 23, 2015 Share Posted December 23, 2015 Shit for strength. Shredd gears at the same power levels as our boxes.What box are you using socks?Phil Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.