Jump to content

turbominicooper

Member
  • Content Count

    683
  • Joined

  • Last visited

Everything posted by turbominicooper

  1. ok cool, will give it another going over. cheers
  2. https://www.youtube.com/watch?v=x9R-dtk6pUA
  3. Alright all Basically on idle I've heard this high pitch squeaking noise. The other day when I slammed the bonnet down i heard it when the engine was off. I looked again and basically if I just shake or wiggle the engine I can hear this squeaky noise. Engine mount yeh? Can get a vid if it helps. Cheers Ryan
  4. as above. in need of the GT badge that sits on the grill. ta
  5. https://m.facebook.com/groups/468173396549649?view=permalink&id=1225004947533153
  6. Ok cool I'll try and find that one. Any ideas on ep82 which one?
  7. trying to fit an apexi at2 unit to my ep82 (second hand unit). spliced the white/red wire from ignition to red on unit spliced the blue/red wire from the ignition to blue on unit spliced the black/white wire from the ignition to the green on unit spliced the yellow/blue from handbrake to the grey on unit earthed the black when i switch the ignition off the engine cuts out but the electronics stay on for the timed duration and then go off. pretty sure i got wires right as i cont-tested them before hooking up but havent managed to find an official Apexi AT2 wiring diagram. a
  8. my hunch is this is the stalk not engaging properly but here goes... my indicators do not flash they just illuminate to the direction I point them (L & R). I thought at first it was the relay playing up and was going to ask where it was located behind the dash but last night when I had it on I pressed the direction a little harder (either L or R) and then it began to flash but a very slow flash?? so what do you think faulty stalks or faulty relay?
  9. so RT it is cheers for input guys, seems a case of you get what you pay for.
  10. whats the verdict? power reliability resale value
  11. http://www.ukstarletowners.com/topic/102833-starlet-parts-for-sale-inc-performance-parts/#entry1190037
  12. Do the lot mate https://youtu.be/U1XRdi1LkTw
  13. Is this the one https://m.facebook.com/groups/28223300755?view=permalink&id=10153903642795756&ref=bookmarks
  14. You don't really need to pull it out to do the above but if u r may aswel do rings and bearings.
  15. What's the views on this bad boy, worth the moular? http://www.blitz-uk.co.uk/Product-15.aspx
  16. yeh ignore this. just me being over excited to get out and drive it hadnt jubilee'd my intercooler hose on to the turbo properly. now its on proper shes a beast! spools up at 2500rpm, 11.3 afr on boost and to be honest is starting to scare me. got it set at 10psi and its flying out of corners and overtaking / straight line acceleration is insane need some decent tyres now to keep it a bit steadier on the road. well happy. think this billet td04/tf035 build is gonna be the icing on the cake
  17. as in the title im looking for: Lightweight 5e Flywheel (not burnt out). 2x decent spec tyres to suit 15x6" rims will need to be posted too. cheers
  18. i can get the turbo built this week but machinist is on holiday till next saturday so dont know when will be able to get that done. should be sweet as when done. race is on then colin, who will build turbo first
×
×
  • Create New...