RobSR

Got any readings driving it yet?

Do you have just an engine wiring loom that hasnt been hacked up?

Its no doubt the ground for the TPS. On the GT loom the ground comes from the water temp sensor, which is spliced with the ground from the TPS, then the MAP then goes to pin 16 on the 26 pin connector on the ecu. I didnt understand these two tho? what you mean?

Saw that Celica for sale on pistonheads quite a while back. lovely car

Because they fudge signals to trick the ecu as to what boost its running thus affecting fuelling.

...and take the fcd off if your only going to be running .8 bar.

Compare the pinouts of the ecu, I cant remember exactly off the top of my head now, but you need to splice in the Distributor, ignitor and coil, knock sensor, and swap a few other pins around and that was the main lot. Map sensor is different also. Have a look online as all the pinouts are there. The N/a and ep82 loom is very similar.

Bet its the FCD. For the sake of piece of mind seeing as your under fuel cut, take it off and see what happens to the AFR's. Probably your problem

^ This. Still running a standard ecu? Have a FCD fitted atal?

Seen this problem a few times specifically on exedy paddle clutches. Can happen when they crack/pop the springs out of the plate...that or release bearing. Take the box off and have a look.

Lol why not? you hardly need a whole tool kit. Screw pissing a load of money on a car that could have a cracked ring / done gasket.

Itll look good when all painted... the fitments probably ish as youve offered it up with your oem splitter still on looking at the photos above.

Cheers Yea the show was awful, the weather probably didnt help tho

Thought id post these up here, some images from Time Attack / Modified Live last weekend. The show was god awful, but i only went for time attack, hence just pictures from that. Couple of samples in the thread. Full set here - http://robfisherphoto.photoshelter.com/gallery/Time-Attack-Round-3-Modified-Live-Snetterton-090613/G0000CirgL0qHH20/C0000Sgy8UGbeIUM'>http://robfisherphoto.photoshelter.com/gallery/Time-Attack-Round-3-Modified-Live-Snetterton-090613/G0000CirgL0qHH20/C0000Sgy8UGbeIUM or Facebook which ever you prefer! - https://www.facebook.com/RobFisherPhotographic

Ah sweet! That's more than I thought there would be. Going back there next week so ill have to see if I spot any!

This is awesome, are they the only 2 on the island? Wonder if theres any in jersey...

Nah I don't, found em on a convoy there so took some snaps. Think a couple added me on Facebook..but yea feel free to link them to the pics!

Nice one

Go ahead! Nice one bud. Cheers guys.

Hiya guys, Thought id post up a few of my shots from mimms as im sure theres some honda fans on here + Rbz's glanza was there..! If you like my work, please head over to my Facebook page - http://www.facebook.com/robfisherphotographic'>http://www.facebook.com/robfisherphotographic and give it a like, and check out the rest of the meets photos! Cheers http://www.flickr.com/photos/robfisherphotographer/8684493372/'> http://www.flickr.com/photos/robfisherphotographer/8684493372/'>RFP MIMMS 056 by http://www.flickr.com/people/robfisherphotographer/'>Rob Fisher [RobFisherPhot

Cheers for the help guys, i will pass this on.. Well yes, as when people have a smash and dont declare stuff its what pumps premiums up for everyone else.

10.0 or 10. something? Ideally you want to be aiming for around 11.8:0 on full chat.

^ Indeed, theres not really a right and wrong way. depends how you want to / what you want.

Yup thats right.

Rev it basically. then start giving it some boost after a couple of hundred miles so the bores dont glaze over.