Jump to content

SpikeyJp_68

Member
 View Profile  See their activity

  • Content Count

    1024

  • Joined

  • Last visited

 Content Type 

Everything posted by SpikeyJp_68

  1. SpikeyJp_68
    It wouldn't be the depth of it would it ? Or is it only dependent on diameter ?
  2. SpikeyJp_68
    About time I helped you and not the other way around
  3. SpikeyJp_68
    Compressor inducer measures 39mm Compressor exducer measures 51mm
  4. SpikeyJp_68
    So both to housings need the pins removing and rotating have put the pics in your thread Colin
  5. SpikeyJp_68
    Hi guys, I've gotten round to rotating my TF series turbo and just wondered if both housings have to be rotated so the oil feed is at 12 o'clock and the drain is at 6 o'clock or does just the compressor housing need rotating ? Thanks in advance
  6. SpikeyJp_68
    Mmmmmm new coilovers...
  7. SpikeyJp_68
    Get the 98 and paint it and see which you prefer. Only the cost of the bumper repair & paint then as you're a painter nardi wheel looks good. Still keeps it oem looking
  8. SpikeyJp_68
    .
  9. SpikeyJp_68
    Was playing with the idea of speed vision cams and a raised limiter so I'll let you know what I decide. Cheers Colin
  10. SpikeyJp_68
    Very hard to see but yes it is a 4cm housing Colin
  11. SpikeyJp_68
    So it's pretty much illegal to swap an engine or turbocharge one ? Also, the holes on my sils don't line up with the skirts. I'll be using tigerseal
  12. SpikeyJp_68
    yeah forgot that. It's just to tell the insurer it's a turbo isn't it ?
  13. SpikeyJp_68
    Definitely won't be. It's not worth it imo
  14. SpikeyJp_68
    Keeping my eye on this. Will have it off you if it's there when I've money
  15. SpikeyJp_68
    Just recieved mine in the post today mate thanks anyway. Mines a 4cm I beleive
  16. SpikeyJp_68
    It's only a bit bigger Never seen one in person before
  17. SpikeyJp_68
    Just leaving this here
  18. SpikeyJp_68
    Up
  19. SpikeyJp_68
    Bump Turbo reduced to 60 euro + shipping & fees
  20. SpikeyJp_68
    When you get chance could you get this pic Richard ? Looking at doing this if it's all bolt on bar some grinding
  21. SpikeyJp_68
    I'll give you what you payed 😉 About £25-£35 would be the going rate
  22. SpikeyJp_68
    Up
  23. SpikeyJp_68
    You can buy a tool off eBay for about 20-25 euro. I'll be doing mine myself. Not hard and takes about 20 mins
  24. SpikeyJp_68
    Slap a restrictor in, be grand
  25. SpikeyJp_68
    Up
×
×
  • Create New...