Jozinobi

Its looking good now Jay. Thanks for your support man. Im dying to fire her up lol. Much kudos to M16Chris for all his help and services also.

Project Red EP91 5EFHE Rebuild Update I picked up the gearbox last night which is sorted but it still needs a drive shaft seal. Have ordered one off Sheekey. I also dropped off the other body parts to my body shop. I also needed a new timing belt pulley which I got hold of so my mechanic can now work on the aux belts. The paddle clutch has now been fitted which Im pretty happy about. The engine bay parts have been all sprayed up so will be collecting those soon. The red I used for my brake calipers have been used for the strut brace ends, radiator brackets, engine damper brackets and bm

Toby had some with 8j width, Im sure he'll give you some feedback on the width and offset too.

Welcome to the UKSC site zurgie. Here is all the info you could ever want to know from our sister site and our site: Turboing a 4E-FE Engine Cost of Turboing 4EFE vs 4EFTE Conversion Detail of Components needed for 4EFTE Conversion My advice to you is to go for a clean 4EFTE conversion with corresponding wiring looms however it is up to you what path you wish to take if you wanted to be different or based on your time/ budget or expectations. I know you say you use the car daily however it is a small time sacrifice to have a better engine setup in the long run so I definitely wouldn't ru

Cheers man Thanks for the support. Its just time really working against me. #Engine Running #Bodykit and other parts fitted and sprayed. #Emanage Base Tune #Gather remaining parts for ITB setup and fit them/base tune #Final Tune and RR #Track Days There's still much work to be done.

Project Red EP91 5EFHE Rebuild Update Gearbox will be ready on Monday so all the magic will happen next week The giant 'C' shaped boxed has gone but its interesting contents are right here.

The shopping cart is disabled until sufficient feedback has been received. It will be announced when its enabled. Please try to be more aware of what is going on within the forum and check especially major announcements. TT Update Thanks

You cant get them as a single part Adam unfortunately unlike the EP82 cups. They are part of the whole EP91 shifter unit which is ludicrous.

Glad you enjoyed the blog update guys @Dub - You are very welcome man. We'll now strive to keep it up-to-date as it should be having neglected it in recent months. If you have any news please don't hesistate to send it in. Thanks

Loving the new site and approach Tobs. Reminds me of wangan midnight. Its certainly an exciting new age for the prospective EP parts buyers. You deserve to do well man so all the best with the new improved venture. Hope to do business again soon just like old times friend.

Simon These are not available new from Toyota as they were optional factory extras at the time of production. Hence they can only be bought second hand or as brand new or second hand replicas.

Glad things are ok with you Lew Thanks Kevin, still a bit more work to be done but we'll get there Did you get a good look at the scoop, any differences? A big 'C' shaped package arrived earlier so just about to inspect it. Realistically there is a slim chance of the gearbox being ready by the weekend. So most likely I'll get it back next week.

Sounds awesome Ryan. The main question is did you manage to take any photos of these EPs?

Cheers Lew Its all a waiting game bro... Nice to hear from you anyway man. Hope you're keeping well. Talk soon.

Cheers Nic Glad you like the parts man, I can't wait until they are on the car As for the gearbox it was all built up when the problem was found so it was pretty professional instead of just giving it back to me etc which any place could have done. The spacers are being ordered today and take 2 days to come in. The guy sorting my gearbox is also my emanage tuner, pretty impressed with his attitude and dealings. Im dying to fire this engine up but like everything I must wait.

Sorry to hear this Massen. Is it possible for you to source a second hand unit? Hope you get back on track man.

Project Red EP91 5EFHE Rebuild Update There was a small complication with the gearbox so it has to be taken apart and done again. The culprit was the spacer that goes behind the front diff bearing, it was too thin hence the lsd being aftermarket was a little too slack. Im glad this was found out and a selection of spacers have been ordered. This has held back getting the engine running however at least its going to be right. Goes to show that no matter how well prepared you are, a few problems will happen. The engine bay bits should be painted by now. l left the chu bits with my bodyshop

Glad you're keeping her Laura. Have patience and you will have a very sexy EP. Keep it up.

From an n/a owner who has used the iridiums, they are fine bro. Have had not one problem with them. Glad to hear you are keeping the kermit. Looking forward to these updates. Keep the faith. You still going for what we discussed?

I know it can be difficult to find the right sections. Have a look in EP Technical for Turbo Tech, Fueling and 4EFTE under Engines. Those sections will have all the info you are after. If there is anything else you need to know or ask please search before posting a new thread. Any other "what BHP" threads will soon be moved. Thanks & please use and enjoy what the site has to offer.

@nerosis I'll have to issue a warning to you if you do not start posting in the right sections. You are clearly ignoring the rules. Thank You

Please start attempting to post in the right sections. A warning will result soon if you do not start using the site properly. Thank You

Unfortunately they have to fail a certain percentage of people dude. At least you will more prepared for the final test. Observation is the most important.

Real sorry to hear this bud. I know you were gunning for this test and tbh you didn't do much wrong, much like your last test. Those islands with the three turnings can be a bit of a stitch up. What were you instructed to do in that situation? April 20th will be the day when you finally nail it mate. The system is just ghey and you know it. I know its not cheap man but all the best and chin up.

Hi Bob Thanks for your response to our announcement on trading within UKSC. In response to your post it is certainly fine to use photobucket or any other reliable hosting site to host photos of items for sale on the forum. It is a common method used on the site now by members selling and it also helps by not using the sites bandwidth as you have mentioned. I can understand that you have had some difficulties in the past with buyers. Lately we have been more protective over buyers because there have been increasing problems with sellers selling items not as described or general abuse as a r