Jump to content

Amjad

Member
  • Content Count

    12114
  • Joined

  • Last visited

Everything posted by Amjad

  1. Smacked it! Can't wait to see this Blitzing around track!
  2. That would be perfect, I don't think mine ever goes over 90c on roads
  3. Just loosening the tensioner and undoing a few bits, fiddly but not too bad Just make sure you get a sandwich plate that fits the filter housing! First one I got was all wrong!
  4. I wouldn't call it bodging, they all really need to have the PAS bracket grinded to fit! Few minutes with an angle grinder and a vice is all that's needed! Trust me it's worth having them both, oil pressure is likely to indicate a failing engine anyway rather than temp as far as I know. And then keeping an eye on temps around track is useful
  5. Oil pressure is important too, I'd just get a plate and run both..Oh wait, I did
  6. £50 on the manifold is fair, not that many about these days
  7. I saw 110c on track but it didn't go higher as I took it easy until temps dropped to 100c before going for it again. Would I benefit from using one? Considering the car would be driven on road most of the time but tracked a few times a year. (Looking to do a few full track days)
  8. It looks like a good quality grille, Idrees is probably the expert on this topic though
  9. There is probably a stamp or badge somewere on the back?
  10. x2! Good price now though Mine has gone up by £400 but I'm switching to another company beating last year's by £200
  11. Any chance of one with a Quadlight GT instead of square?
  12. I think it should be fine just doing the boot, I did about 500 miles on a split boot and it was fine
  13. I kept thinking it was this weekend too
  14. £80 isn't bad at all May get mine done then eventually, I get a noise as though the rear brakes are being applied <20mph :S
  15. £150 for all four I was quoted by Arch Enemy
  16. Awesome How much did the brake refurb cost if you don't mind me asking? PM if you like
  17. End of the shifter linkages on top of the gearbox, 2 pins to remove and swap
×
×
  • Create New...