Jump to content

T-dog

Club Member
 View Profile  See their activity

  • Content Count

    657

  • Joined

  • Last visited

 Content Type 

Everything posted by T-dog

  1. T-dog
    Im installing a Rev limter as I dont like the fact my plug and play ecu has a 8k+ limter . Going by the wiring diagram its asking me to wire it to the negative of the coil . Im a right in thinking I can just go onto the negative feed 2 pin plug from the coil or Im I better in taking it from the ecu or diagnostic port ? Any help would be great 👍🏼 thanks Toby
  2. T-dog
    Pmd
  3. T-dog
    As above great seller , received all my parts today. Spot on cheers 👍🏼
  4. T-dog
    I've got a Glanza auto ecu , pm me
  5. T-dog

    Oil Leak

    T-dog replied to Nilz90's topic in Engines

    Oil pump they are sealed to the block with sealant , take off and reseal and why your there put a new cambelt side crank seal in to as they normally leak 👍🏼
  6. T-dog
    Got to be done lol , yeah td kits are good , you will probably still need to have the crank notched and some other bits done , not 100% sure on a full build , give them a call dude
  7. T-dog
    I bought a forge engine in the end and just left the old engine in the shed lol , I'm to lazy lol 😂
  8. T-dog
    It's the ringlands on the pistons for sure , had a similar problem myself
  9. T-dog
    If your still stuck you can have the one out of my car as I've not got aircon anymore 👍🏼
  10. T-dog
    These are the right ones : Check it out now: http://r.ebay.com/Fmoy20
  11. T-dog
    This is the wrong kit - https://www.ebay.co.uk/itm/252522422404
  12. T-dog
    Yeah there great for that much money , what set did you buy as I found I bought the wrong set the first time around as it had the wrong bottom hose and they said it was fine for the Glanza but You could see it was wrong as it needed another bend . So I ordered the gt turbo kit which had the right hose 👍🏼
  13. T-dog
    There good , I ran them for a year and a half so far with no problems , in my eyes they feel and look the same as my old samaco ones . Toby 👍🏼
  14. T-dog

    Varis bumper

    T-dog replied to Muzza784's topic in EP91 Bodywork

    Ok great 👍🏼
  15. T-dog

    Varis bumper

    T-dog replied to Muzza784's topic in EP91 Bodywork

    Same , I'll take one also , what about the varis rear bumper and the spoiler ?
  16. T-dog
    How much for the varis rear spoiler ? Pm me 👍🏼
  17. T-dog

    brake caliper bolt

    T-dog replied to Tomson's topic in Braking

    Toyota would be your best bet , or some one who's breaking a car 👍🏼
  18. T-dog
    Head lights - h4 , side lights - 501 , fog lamps - h3c
  19. T-dog
    Any update with these ?
  20. T-dog
    on my old car dude , need another set for my one 👍🏼 no worries dude , no not my post mate , someone else asking about them
  21. T-dog
    Hi , I'm after a pair of celica calipers , off a st185 but let me know what else you have got . Thanks Toby
  22. T-dog
    I would say they are not st185 calipers , they look like the standard celica 1.8 ones
  23. T-dog
    No worries , You running a lightened flywheel then ?
  24. T-dog
    I had this problem , due to the lightened flywheel fitted when I put my foot on the clutch to slow down for lights it would die or nearly die , I just adjusted the idle screw , so it idle like 500rpm more 👍🏼
  25. T-dog
    Here is a wiring diagram for the major sensors with colour of the wires , the sensor wire comes around near the wires that for the thermostat housing and dizzy and oxygen sensor . So look around the gearbox area or behind inlet , my be flouting about somewhere , the wire normally has like a hard black plastic shielding around it with the spade connection on the end . Hope this helps
×
×
  • Create New...