Jump to content

fiddlersport

Member
  • Content Count

    1345
  • Joined

  • Last visited

Everything posted by fiddlersport

  1. The woodruff key may be pushing away as you pushing crank pulley on... Looks rusted too You can pick a new one from toyota for £1.60 + vat
  2. Np...didnt know if you on a budget set up Or going new stuff all the way Nice build
  3. The tps part numbers are different so ideally use your existing throttle body with new gasket to avoid this issue The cable is slightly longer or shorter but still works Earth on back of manifold All done
  4. Woodruff key ? Small half moon metal piece on crank
  5. Stock pump still operate quite good after all these years....wouldnt a fpr with gauge be better with stock fpr settings ?
  6. Just buy a normal k10 stock 1.0 for the parts....unless you can buy oem stuff new at reasonable prices ! Quite a few k10 come up on ebay with decent body Good luck
  7. Did the head need replacing on your current engine ? You going forge build eith new head
  8. Stick a n/a box in and have yours rebuilt ?
  9. Fuel tank preperation Quite common now these tanks starting to rot Using the por 15 tank prep
  10. Preparing underside for rustbullet treatment
  11. Purchased trd engine mounts and front and rear braces Quick post
  12. Easy to remove speedo connector off gearbox then clocks just push out easy for cable removal
  13. You can buy the tool for this job !
  14. Rebuild not a option if you have the box already ?
  15. Put a picture of the box Some one may have put the end casing off a glanza/gt onto n/a box ?
×
×
  • Create New...