lukEp

lol I dont have one pet not ONE! and you have a sanctuary going on there by the way I have the same 2.1 creative PC speakers as in the picture

It won't matter about password you can send an email and say it's from anywhere

That's thermostat Liam 100%

Sorry boss would have been in sooner but I was asleep!

Gordon Bennet

dead flat!

lol the advert has been changed

my celica gt4 did that and it was rad cap

if you getting less than 13v while running its alt

.........Runs down stairs to unlock my car!!!! ;)

I'd say try a new rad cap

The rear of the 4wd's have taller dampers? if so will corolla dampers not fit and the fronts are the same size as starlets and the rears are taller

Looks cool defo different get It fitted let's have a look

Looks well better now with them skirts, but you should rename this build to starlet PLOW! in fact I'm making you a sticker.

Cheers Jim xXx. @Phil, yup!

Cheers dude 6speed was quite easy and it's a direct Bolt on mod and the hardest part of the auto to manual conversion was drilling the holes for the clutch pedal which wasn't that hard . There's been two difficult thinks on this car....... Just to change the oil filter as I still have the air conditioning and second trying to get the clip on the HKS actuator so I just ended up using a nut and bolt.

Awesome make will look savage when painted

But that's the whole point is to keep the system hot if it cools it slows the flow. You can see the effect on RR you alway produce more power on the second run because you've got the heat in the exhaust system.

No prob not it gets used pretty quick when wraping and is hard to say how much you will use. I'd say start with 15m and see how you get on.

Keeping the heat in the exhaust system aids flow, the quicker them gases cool the slower they will flow which is why people wrap them for a true preformace system it would be wrapped and also have a large diameter piping at the turbo and as you get to the rear that diameter gets slightly smaller because as you know gas Condences the colder it get so reducing the diameter will help keep the flow constant. If you get me.

Yeh it was idrees that told me they were the same and kindly gave me the two covers that go over the bolt heads

yeh got the 98 lip to and going scrappys tomoz for bumper brackets

yep and lip

Test fit....... need some 98spec bumper brackets as the two bolts at front are to far away to get the bolt in

Big fuck off chain and padlock round the steering wheels and pedals