lukEp

It was a very nice day today so thought I'd clean both cars and fit my a-tech back on but when I took them out the shed, I realised they needed a bloody good clean One on the left is actually dirty! But you can tell on this picture I'll be putting some more rim tape on soon And my other car Comments welcome

Looking Gooooood!

That's awesome mate that's fucking quick for sure, can't wait to see some videos and pictures

Did you replace all gaskets with new you could have a leak on the mani

Boost creep mate it's the extra flow from the Zorst (your old one was a bit restrictive eh ) and the waste gate can't get rid of the gasses, after porting mine I've not had a problem since took about 2-3mm off the hole get it potted and it will be fine

There ya go. One with EP-82 on but can basically put anything on it for ya. http://www.ukstarletclub.com/forums/index....showtopic=38951

Me! I've made a few JAP show plate for a few lads on here but there not pressed I'll dig out the tread just a mo.

Please

Geo is yours As light as the one in the vid.

Standard Air filter

Majority of people will see it when they click "new posts" you just need to bump it up might be worth measuring the size of the hole for the bung as some after Market/copy's might fit in they sell universal ones on eBay to might be worth a search.

Yahhhh! More progress wish I had progress I just have repairs to do at the mo

manchester ranges between 129.9 - 133.9 as far as i'm aware.

Got these through yesterday and I'll get some pictures up later if the colours, the pink looks fucking awesome

If I remember rightly it is 90nm I put a drip if stud lock on as well

Right just checked and there both gas filled! Thicker Thinner The very top part number if different one is ka20 thicker And other is ae12 thinner

Cheers amjad I'll go check to see if one is oil filled and one is gas

I've just has to change my n/s/r shock because it was bust and Craig n give me one of his spares now while changing it I didnt notice but once fitted and I looked at the other and the o/s/r looks like it has a thinner tube than the passenger which would make me think 1) the ep8* shocks are more heavy duty than Ep9* or the Gt and glanza shock are more heavy duty than N/A shock Can anyone shead light on this

Yeh man I was so close to bidding on them Fire the measurements over actually my new message light is flashing Edit: nope it was mr bower , fire the siZe over

Yeh which is why I don't have one £100 I'd rather keep the original wheel TBF.

see the little gold pin that touches the gold ring on the boss....... he dont have that pin he has a clock spring which is basiclly a coil of wire in a round case and as you turn the wheel the wire unravels/ravels up to keep that connection there which is the same as mine you need a totally different boss for our setup he needs this one http://www.rhdjapan.com/boss-kit-hub-adapt...ed-toyota-26432

I know of two different air bag system in glanza's mine the wire and clock spring type and Craig n has a wireless type which works on a weight in the air bag he light never even came on when a removed his airbag so dilemmas dude. Fuck Ryan beat me to it I'm thinking Phil has the same type as me with a clock spring and wires

You can have mine but it's nardi fitment only?

nastyrash will come to and chesh said he will come 1) rob_bower x2- YES 2) Steve GT -YES 3) redz11 - YES 4) Bluebear - YES 5) BigMan - YES 6) SiCaln x1 - YES 7) Craig_N - YES Ro55ifumi x2 -Yes 1 T Shirt 9) Liam_D Yes 1 shirt. 10) Luke H, x2, Yes 11) lukep x1 no 12) Pandamonium x2 YES x2 13) lew777. maybe 14) nastyrash2002 x1 - no 15) cheshirglanza - x1 Unknown 16) markoos 17) ryan lang x1 YES (cant guarantee for deffo yet) 18) 19) 20)

http://www.kenwood-electronics.co.uk/suppo...ar_electronics/