Mk3 silver gt

I did PM you earlier about the tc shifter and c pillar bar, you still got them?

Pm'd

I'll see if anyone has the drivers 1 they wanna sell, if I have no luck I'll get back you bud ok bud thanks

As above if anyone has 1 they wanna sell

I take the strut caps mate, and the door cards. Pm'd you

I had the same problem but I managed to get the coolant pipes pushed right on I used fairy liquid and they slid on so easy, but I was there for a good half hour before I thought to use fair liquid

Its m10x1.25 bud

I had a quick look bud and think the USA is the only place, you could make your own with some small terminals a bit of wire

Yeah they will bud straight fit but you can't have 13" wheels on the fronts tho

Yeah it sounds like coolant temp sensor because that sensors tells the ecu to cold start it so if it is gone probs will struggle to start. What year is your glanza because there's 2 sorts - either 2 wire green plug or 3 wire grey/black plug and is located below the dizzy (thermostat housing) Pm id-workz or tuning devlopments there both traders on here can sort you out

There's this aswell on toyotagtturbo.com http://www.toyotagtturbo.com/forums/showthread.php?108004-***-For-Sale***-TD04-05-WEPR-Evolution-ext.gate-manifold-downpipe-screamer-pipe-5e

no worries You need to grab them while there because it took me a few months find one

I saw this earlier on ebay http://m.ebay.co.uk/itm/111385424152?nav=SEARCH

This chap has a apexi ecu- not sure if he still has it but it might help http://www.ukstarletowners.com/topic/80031-ep91-power-fc-rs-rocker-varis-bonnetcusco-cage-370cc-injectors-98-spec-taillights/?view=getnewpost

I can't send pics over because crap phone atm but the pic links works for me have you tried it on a pc? The back box is in good nick just has ding on the underside but can't be seen when fitted and doesn't affect operation. Would rather use paypal just incase there's a problem with delivery but I'll see if I can send some pics over. Thanks

Just the fronts left bud

Bump

Bump

Yeah can put hids in but you will need 2 sets 1 for low beam 9005 type bulb and 1 for high beam 9006 bulb type. The dash are 3 side light bulbs (501), If that helps

Yeah there suppose to be 4 retaining clips per caliper, there not cheap to get new but your best off asking a members here if they would sell you some for a few quid.

These are what you need http://m.ebay.co.uk/itm/230733653704?nav=SEARCH If you haven't already brought a fan, this what use http://m.ebay.co.uk/itm/120931632430?nav=SEARCH

Bump

Bump

Bump

Got a ecu off trisk last week, sound chap to deal with, he let me pay for in installments over the bank holiday weekend and he kept in touch through out and when he went to send it to me it ended up costing a lot more than we both thought but he said the deal had been done so he paid the extra delivery and it arrived friday well packed It couldn't of been easier 100% genuine chap Thanks trisk