Jump to content

steve-gers

Member
 View Profile  See their activity

  • Content Count

    1028

  • Joined

  • Last visited

 Content Type 

Everything posted by steve-gers

  1. steve-gers
    A live feed from the sidelights and an earth.
  2. steve-gers
    How much warranty do these come with?
  3. steve-gers
    They were not 140bhp, the 20XE's (coscast head) were 156bhp and the C20XE (standard with cat) were 150bhp. I had a modded 20XE in a corsa and it was pretty quick and very torquey. Only weakness was the piece of shit corsa it was in. They are very goid engines though can take loads of punishment not to mention some of them are over 20 years old and still going strong.
  4. steve-gers
    Is heat range 8 not a bit much for that setup? I though 7 for upto 270bhp
  5. steve-gers
    Yes there fine tuning developments mapped my car it's running 222bhp and injectors are fine.
  6. steve-gers
    Yes return hose is the 90 degree rubber bend. People say to prime new turbo'sbut I'm pretty sure there is no need when just chsnging this part as the turbo will still have plenty of oil in it. When I put my new turbo on with no oil in it I never bothered priming it at all and its fine, guess it would be good practice to do it though.
  7. steve-gers
    No need to drain oil or bleed. Easy job, not much oil comes out when removing but best to stick a rag down to catch the few drips anyway.
  8. steve-gers
    Ct9 piping is over £100 on ebay, not worth paying that for a couple of pipes.
  9. steve-gers
    If anyone has CT9 turbo to cooler piping going cheap I will buy it.
  10. steve-gers
    Been a few on tgtt recently
  11. steve-gers
    Pretty sure they are H3 for GT and H3c for glanza
  12. steve-gers
    I have a 0.5 bar spring and boost 0.85 low boost on TD04 and 1-1.1 bar high boost and it holds perfectly. I just use a cheapo demon motorsports external gate. Don't see the point spending loads on one when mine cost £80 brand new and works fine.
  13. steve-gers
    You can't boost below spring pressure so you maybe want 0.5 spring or something then you can adjust it higher with your ebc or bleed valve however you see fit. Also if you need a 38mm flange I have one.
  14. steve-gers
    If funds are good I will be having one. When will the payment deadline be?
  15. steve-gers
    Not a good idea to havr no inner arches, leaves the inner wings open to rust.
  16. steve-gers
    195's are plenty wide
  17. steve-gers
    I have gearbox bolts here.
  18. steve-gers
    Carry a hip flask full of whisky.
  19. steve-gers
    http://www.toyodiy.com/parts/
  20. steve-gers
    Try toyodiy
  21. steve-gers
    Yeah used one and there pretty good much better thsn rope or bar. Work perfect apart from at very slow speeds it tends to pull the car sideways a bit but works fine still.
  22. steve-gers
    Do the GT boxes not have a longer 3rd and 4th? If so then the gears would be a different size to the glanza boxes and also I'm assuming so would the synchro rings?
  23. steve-gers
    I'm pretty sure that isn't 1/4 mile
  24. steve-gers
    I just fitted one of them rads to my car, there really beefy wasn't as much clearance between rad and downpipe as I would of liked either.
  25. steve-gers
    my galaxy s2 just started doing this tonight for the 1st time
×
×
  • Create New...