Jump to content

Glanza Mac

Member
  • Content Count

    1680
  • Joined

  • Last visited

Everything posted by Glanza Mac

  1. awesome project thread dude , hope to see the little baby soon
  2. well after alot of hard work today the car is finally running sweet, adjusted the fuel pressure etc but the fault was vaccum pipes. basically what i had done is put a vaccum pipe onto a water pipe (a)... Ooops but it was a case of quick, put all the pipes on as it should start and excitement got the better of me but now it is all sorted. idles at 1500rpm cold and 1000rpm at normal running temprature so all is good few little things ive had to do tho. 1. remove my screamer pipe and left the tial wastegate just open as the screamer wouldnt allow my bottom radiator hose to go on 2. fill the
  3. agree'd, straight forward to fit as ive looked into buying one myself
  4. Recently bought a Carbon Fibre ducktail spoiler and Carbon Fibre rear Oem splitter from Browner so just waiting for that to be delivered... cant wait
  5. Engine idles at 2000-3200 RPM and it pulsates up and down, its like the ignition or fuel is being turned on and off. does anyone know what can cause this fault?
  6. i would like carbon splitter and spoiler.. can you pm me with price inc delivery i.e courier etc. thanks
  7. Been very busy the weekend just gone, a friend came round to swap a few components over to see if it was them at fault on my glanza. Changed plugs.. no spark Changed leads.. no spark Did a resistance check on the ignition coil as i got no spark from the king lead.. no spark Checked dizzy and rotor arm.. no spark Swapped ignitor.. no spark Even swapped the ecu.. no spark But all of the above worked on my friends glanza so my components were not at fault. So i carried out a diagnostic fault code check and i got the follow.. Fault code 12. RPM Signal 14. Ignition Signal 22. CTS All underl
  8. found the problem, ignitor was not earthing correctly/efficiently
  9. that video was pretty good tbh , wouldnt mind doing something like that
  10. new flywheel does sound like a good idea as you shoudnt be going through starter motors like that.
  11. Engines in etc, still no spark and ive done many tests and checks so im lead to beleive its only the coil left to blame, shall be ordering one and fingers crossed .. Bought a few things recently.. New carbon blitz gauge + pod Compared to old one Some Stickers i bought at fast show And my favorite one is this one.. ... i shall be moving my tax disc
  12. ill be there, possibly may go on track too
  13. i agree ^ , ill get intouch with chand and a few others that dont hardly use the site to come along aswel
  14. just done an engine stransplant as my old engine spat its dummy out (smashed the conrod to bits) the new engine is in and all connected up, there is fuel as i can see it (clear fuel lines) going through the injector rail, to the fpr and back throught the return pipe. i have removed my plugs and there is fuel going to each cylinder. ive turned the car over with a plug earthing out on the engine.. no spark ive removed the king lead and earthed that out also... no spark so am i right in thinking that the coil pack has packed up and is not producing a spark?
  15. what was the cause of this fault?
  16. were abouts you from exactly? im in the lincs area also and interested in these
×
×
  • Create New...