Zeldoz

Can do it from above. If it has a gasket i would change it

Take the bottom rad hose off the engine on the right, unbolt the housing and take it out, replace and work backwords! Voila!

Do those wheels balance perfectly? - I find it hard to believe they would.. as im interested in those..

At times, i love this place! - PM'd thanks guys!

Spot on, thank TrisK.

That catch can........ *driblling*

Oh okay. Thanks

I have no cap though. So im guessing i can't leave it unblocked? I know its setup already by looking at it. Just wanting to clarify what i do with the "NO" output?

I have found one on eBay for £5.95.. I'll happily buy that... but does anyone know if Halfrauds would stock it, or any other place etc.. I know its an odd thing that most places probably wouldnt stock. Is it vital i have it? - I;ve read its to stop debris going into the controller? Im just keen to order one today to get it asap or pick one up etc..

I just recieved this in the post, i had a quick read of the PDF i downloaded for it. I know on EX/W you use the two ports that the plugs are screwed onto. But would this one need a bolt in it to bung it off? See pic.. I hope you understand what i mean!

Personally.. i would get earth and positive. Take unplug the loom from the horn. Go directly on the horn, run it through the firewall and onto your switch and just have it so it on a 50p switch if your that concerned? Would probably take 10 minutes

I've just been mind fucked. On your fascia it will say at the bottom "KPH" or "MPH" The OUTTER number should be MPH from what your saying.. Therefore, if you want to do 30mph.. Do 30 of the outside numbers.. Get a picture up of your dials.. may help..

What the postage cost on the splitter?

Bejusus. I wanna be rich.

All parts that are PAID for. I've had a nightmare weekend! Will be posted today. really sorry about the daily. Tracking numbers to be pm'd to the 3 buyers.

Unfortunately i can't make it. With remap saving, and two holidays between now and June.. I can't afford to go. Geniunely gutted. But, the cut off is too early for me to be able to cater for! I'll see ya'll at another!

Lol i wanted 2 or 3 bits of the few he broke.. but never got replied too!

The white box? I have the dash out so should be accessible just how hard is it to remove?

Looks great! Always wondered does the lip make the rear lower?

Pics of what you need? I should have it all

Did you pull away hard?

What!? How? Explaination!?

I want the rad you got for feck all!

Did you know the head was on it's way? Devastating that would be!

Well I've decided to bite the bullet and get an electronic boost controller. Plan is to up the boost to potentially 1.1bar. Got this, should be delivered fairly soon! Then it's just about wiring it in. Anyone know what mm silicone I should use to run this effectively? - I don't want it too small. Oil change, plug change, and dizzy cap change to come now!