jellybaby Posted March 19, 2016 Share Posted March 19, 2016 What most peopleSet there ride hight to ? I have a genuine liversports bumper and don't want to kill it when I drive lol I have bc coil overs Quote Link to post Share on other sites
5e colin Posted March 19, 2016 Share Posted March 19, 2016 anything lower then stock rideheigt is troublesome ha ha Quote Link to post Share on other sites
jellybaby Posted March 19, 2016 Author Share Posted March 19, 2016 anything lower then stock rideheigt is troublesome ha ha What's stock ride hight I can't remember lol Quote Link to post Share on other sites
glanzadude Posted March 19, 2016 Share Posted March 19, 2016 As said if you are running ex stock springs and shocks only a matter off time you will damage the bumper + car. Bcs are not forgiving they are made for track & motorway driving Quote Link to post Share on other sites
jellybaby Posted March 19, 2016 Author Share Posted March 19, 2016 (edited) Na I have bc on mine set to soft settings it just to get the right clearance think currently set to 45mm if I new stock ride hight I can revertTo that then go lower if I could.Also I had bc for years and don't damage the car I love them I just was wondering what the stranded ride hight is and what peopleRun them selfs so I can get a ball park figure. Edited March 19, 2016 by jellybaby Quote Link to post Share on other sites
morgey Posted March 19, 2016 Share Posted March 19, 2016 Depends what you want it for, looks, handling, drag? I have mine so the wishbones are fairly level, this is supposed to be fairly good for handling as the geo and roll centers wont be too far off. Its probably in the region of 40-50mm from stock n/a but mine was an Sr so was lowered from factory Quote Link to post Share on other sites
jellybaby Posted March 19, 2016 Author Share Posted March 19, 2016 Just handing andAlso so I don't kill my front bumperOn speed bumps lol Quote Link to post Share on other sites
Gainzy Posted March 19, 2016 Share Posted March 19, 2016 What size wheels are you running? Yeah you don't wana smash that bumper there a fortune . I think the starlets sit nice that bit lower at the front. You can always adjust the collars take your time to set them up! Quote Link to post Share on other sites
daniel_g Posted March 19, 2016 Share Posted March 19, 2016 Will just be a case of lowering it to suit your needs then buddy Quote Link to post Share on other sites
jellybaby Posted March 19, 2016 Author Share Posted March 19, 2016 What size wheels are you running? Yeah you don't wana smash that bumper there a fortune . I think the starlets sit nice that bit lower at the front. You can always adjust the collars take your time to set them up!15" atm gotTo space the rear out 20mm to fill a arches better I will just have a play while at work on the geo ramp once I get it running lol Quote Link to post Share on other sites
Dale SR Posted March 19, 2016 Share Posted March 19, 2016 I had one of my starlets lowerd 55mm, I found it unbearable at times swapped them to 35mm Apex springs and there much more drivable and speedbump friendly Quote Link to post Share on other sites
Gainzy Posted March 20, 2016 Share Posted March 20, 2016 15" atm gotTo space the rear out 20mm to fill a arches better I will just have a play while at work on the geo ramp once I get it running lolI would certainly get an adjustable panhard rod that will adjust the wheels out at the back that bit more I noticed a massive difference to stock I would choose your wheels and tyres first if your planning on changing them. What offset are you sticking with wheel/tyre spend some good time thinking haha stance is everything imo Quote Link to post Share on other sites
jellybaby Posted March 21, 2016 Author Share Posted March 21, 2016 I would certainly get an adjustable panhard rod that will adjust the wheels out at the back that bit more I noticed a massive difference to stock I would choose your wheels and tyres first if your planning on changing them. What offset are you sticking with wheel/tyre spend some good time thinking haha stance is everything imo Yer have a full whiteline handerling kit on order.With the wheels INot got a clue what offsetTo have. Poss going to get some enilkies Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.