Mike-530 Posted September 19, 2016 Author Share Posted September 19, 2016 All sorted now cheers lads. Used the extension bar from socket set to hold her in place lol. Whats the deal with the orc clutch release bearing? It doesn't have a clip to hold it on the clutch fork. I didn't think it would matter as its not going anywhere lol. Cheers Quote Link to post Share on other sites
Mike-530 Posted September 19, 2016 Author Share Posted September 19, 2016 Good choice dude 👍Cheers boss. Tuning developments said they don't recommend them as they are too heavy. Something about stressing the thrust washers. Thanks Quote Link to post Share on other sites
Starlet__SR Posted September 19, 2016 Share Posted September 19, 2016 Cheers boss. Tuning developments said they don't recommend them as they are too heavy. Something about stressing the thrust washers. ThanksSame can be said for any upgraded clutch. Quote Link to post Share on other sites
Mike-530 Posted September 20, 2016 Author Share Posted September 20, 2016 (edited) Same can be said for any upgraded clutch.Spose your right bro. Didn't feel much heavier that my SPEC setup. Edited September 20, 2016 by Mike-530 Quote Link to post Share on other sites
Whitenoize Posted September 20, 2016 Share Posted September 20, 2016 Cheers boss. Tuning developments said they don't recommend them as they are too heavy. Something about stressing the thrust washers. Thanks chatting shit mate they are well tried and tested probably wanted you to buy from them Quote Link to post Share on other sites
Mike-530 Posted September 20, 2016 Author Share Posted September 20, 2016 Haha the guy is full of shit. Took a year and 2 month to forge my car lol. A fucking YEAR!! Already brought 2 SPECS from him and both failed within a month. He also said he was going to build me a gearbox back in February using my old parts and some he claimed he had. 7 odd months later.....nothing. Still waiting on my flywheel and gear linkage arm that he said was posted about 2 weeks ago. The ORC came from japan in the time i have been waiting for my parts!! Think im well over due a feedback thread lol!Thanks Quote Link to post Share on other sites
Starlet__SR Posted September 20, 2016 Share Posted September 20, 2016 Spose your right bro. Didn't feel much heavier that my SPEC setup.Only time you're likely to suffer any wear is holding the clutch for prolonged periods of time. But even a standard clutch will cause wear in the thrust washers. Quote Link to post Share on other sites
Mike-530 Posted September 20, 2016 Author Share Posted September 20, 2016 Only time you're likely to suffer any wear is holding the clutch for prolonged periods of time. But even a standard clutch will cause wear in the thrust washers. Quote Link to post Share on other sites
Ollieh17 Posted September 20, 2016 Share Posted September 20, 2016 Avoid starting car with clutch down and leaving in gear at traffic lights Quote Link to post Share on other sites
Mike-530 Posted September 20, 2016 Author Share Posted September 20, 2016 Avoid starting car with clutch down and leaving in gear at traffic lightsOk boss. Will deffo bare that in mind. Thanks Quote Link to post Share on other sites
5e colin Posted September 20, 2016 Share Posted September 20, 2016 how much was it now al in on your front door step ?? Quote Link to post Share on other sites
Sefton-EP91 Posted September 20, 2016 Share Posted September 20, 2016 how much was it now al in on your front door step ??Would also appreciate knowing this if you don't mind mate I'm having the same issue with my spec clutch and would like an orc Quote Link to post Share on other sites
Whitenoize Posted September 20, 2016 Share Posted September 20, 2016 (edited) Think it works out around 700 depending on howMuch fees etc you get hit with Edited September 20, 2016 by Whitenoize Quote Link to post Share on other sites
Mike-530 Posted September 20, 2016 Author Share Posted September 20, 2016 (edited) how much was it now al in on your front door step ??700 for the clutch mate and they dropped the price on invoice to 250, so costing about 50-60 import I believe. Not had the invoice yet thoWould also appreciate knowing this if you don't mind mate I'm having the same issue with my spec clutch and would like an orc The clutch looks epic mate, very well made. Get yourself one on order ???? Edited September 20, 2016 by Mike-530 Quote Link to post Share on other sites
TimD Posted September 20, 2016 Share Posted September 20, 2016 Would you be able to take photos or scan in fitting instructions?Ive got to put mine back together and I can't remember how it goes!!Thanks Quote Link to post Share on other sites
Mike-530 Posted September 20, 2016 Author Share Posted September 20, 2016 Would you be able to take photos or scan in fitting instructions?Ive got to put mine back together and I can't remember how it goes!!ThanksFitting instructions are very vague and all in japanese. Look out for a little paint line on the flywheel, pressure plate and clutch cover to keep them all the right way round. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.